TheGreenBow VPN Client issue with access through WAN with router in DMZ mode.
-
Hello everyone!
My pfsense WAN is in 192.168.X.X, it is linked to an USG which delivers the public address.
I've put in place my VPN IPsec tunnel properly and everything is working fine.
I've been trying in parallel to put in place a mobile client vpn through TheGreenBow VPN Client but the phase 2 doesn't seem to go through with a traffic selector error.I have tried the same exact configuration but with a public address directly linked to my WAN interface and it seems to be working. Am i missing some NAT basics or anything? It is set on auto and my site-to-site VPN is working fine with my WAN being on 192.168.X.X.
The issue is only on the phase 2 side on my client. I've tried to manually apply since the gateway isn't apparently recognizable but there's still an issue. I'm confused as the only thing changing is the WAN but i don't know what to do about it and i've been stuck on it since a few days.
Thank you in advance for your answer and don't hesitate if you need any more informations :)
-
@Yamka said in TheGreenBow VPN Client issue with access through WAN with router in DMZ mode.:
TheGreenBow VPN Client
is this a VPN application on a device, the device is connected to the pfSense LAN ?
