Status: System logs: Firewall kaput?
-
(running 2.0-ALPHA-ALPHA built on Sun Dec 6 00:13:01 EST 2009 FreeBSD 8.0-RELEASE-p1)
The log is empty for me (in every of the 3 viewmodes), even though there are definitely entries in /var/log/filter.log
The option "Log packets blocked by the default rule" is checked, so that's not the issue.
Also, if I check "Show raw filter logs" in the settings, logs are being displayed fine; at least in the "Normal View", the others still remain empty.Here's a snippet of my filter.log if that's of any help:
5350, offset 0, flags [none], proto UDP (17), length 80)
Dec 11 15:21:01 router pf: 202.180.XXX.XXX.50478 > 88.66.XXX.XXX.23472: UDP, length 52
Dec 11 15:21:01 router pf: 00:00:00.017014 rule 2/0(match): block in on pppoe0: (tos 0x0, ttl 117, id 15352, offset 0, flags [none], proto UDP (17), length 80)
Dec 11 15:21:01 router pf: 202.180.XXX.XXX.50478 > 88.66.XXX.XXX.43804: UDP, length 52
Dec 11 15:21:02 router pf: 00:00:00.294499 rule 2/0(match): block in on pppoe0: (tos 0x0, ttl 116, id 6852, offset 0, flags [none], proto UDP (17), length 131)
Dec 11 15:21:02 router pf: 77.225.XXX.XXX.50372 > 88.66.XXX.XXX.32822: UDP, length 103
Dec 11 15:21:02 router pf: 00:00:00.174476 rule 2/0(match): block in on pppoe0: (tos 0x0, ttl 115, id 10179, offset 0, flags [none], proto UDP (17), length 80)
Dec 11 15:21:02 router pf: 60.240.XXX.XXX.61887 > 88.66.XXX.XXX.23472: UDP, length 52 -
there was a problem with the logs earlier this week that I fixed, if you upgrade that should be fine.
-
Just upgraded to 2.0-ALPHA-ALPHA built on Fri Dec 11 19:41:11 EST 2009 FreeBSD 8.0-RELEASE-p1
but sadly with the same results :(..it might just be me though :-[
-
It was fixed after that snapshot
-
Ahh, ok!
Guess I misunderstood the earlier this week part :PWill wait for the next snapshot and report back :)
-
the problem was caused earlier this week, i fixed it a couple hours before I posted.
-
Just upgraded to 2.0-ALPHA-ALPHA built on Sun Dec 13 22:41:10 EST 2009 FreeBSD 8.0-RELEASE-p1,
but still don't have any logs displayed.
Should I consider a reinstall? :( -
It's definitely not a problem there. Got a screenshot of what you're seeing?
-
Sure thing!
-
So the log view is empty, but there are really entries in filter.log?
I'm not seeing this on a freshly gitsync'd box.
I did find an unrelated bug and fixed it, you may want to try a gitsync on the off chance it might help.
-
I did find an unrelated bug and fixed it, you may want to try a gitsync on the off chance it might help.
Seems that didn't fix it either :(
I'll just go with a clean install once I upgrade my hardware, which hopefully is soon! (that PII is starting to get dusty :D)Thanks for all the help though!
