Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Wireguard Service fails to start after reboot across all our Netgate devices

    Scheduled Pinned Locked Moved General pfSense Questions
    8 Posts 2 Posters 222 Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A Offline
      a.dresner
      last edited by

      We have 3 Netgate, including 2 8200 and well, 2 more Netgate 6100 on the shelf as we test a UI gateway because of reboot issues like this.

      Here we are with the latest update and wireguard fails to start. Lucky we have tailscale running inside each network so we can manually VPN into each location and then manually start wireguard and the gateways.

      No doubt, frustrated, heavily invested into Netgate for a small business and just want reboots to work.

      Backed up, restored, same issue. Reinstalled wireguard, same issue. Chat GPT says wireguard is trying to start to quickly?

      Seeing this in my logs:

      Sep 20 08:57:40 php-fpm 72430 /diag_backup.php: The command '/usr/local/etc/rc.d/wireguardd stop' returned exit code '1', the output was ''
      Sep 20 08:59:26 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Disabled all WireGuard gateways.
      Sep 20 08:59:26 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Removing static route for monitor 1.0.0.1 and adding a new route through pppoe0
      Sep 20 08:59:26 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.3.0/24
      Sep 20 08:59:26 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.2.0/24
      Sep 20 08:59:26 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 192.168.3.0/24
      Sep 20 08:59:29 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.3.0/24
      Sep 20 08:59:29 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.2.0/24
      Sep 20 08:59:29 php_wg 6782 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 192.168.3.0/24
      Sep 20 08:59:29 php 3436 /etc/rc.packages: The command '/usr/local/etc/rc.d/wireguardd stop' returned exit code '1', the output was ''
      Sep 20 08:59:29 php 3436 /etc/rc.packages: Configuration Change: (system): Intermediate config write during package removal for WireGuard.
      Sep 20 08:59:29 php 3436 /etc/rc.packages: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
      Sep 20 08:59:29 php 3436 /etc/rc.packages: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard).
      Sep 20 08:59:30 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Disabled all WireGuard gateways.
      Sep 20 08:59:30 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Removing static route for monitor 1.0.0.1 and adding a new route through pppoe0
      Sep 20 08:59:30 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.3.0/24
      Sep 20 08:59:30 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.2.0/24
      Sep 20 08:59:30 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 192.168.3.0/24
      Sep 20 08:59:33 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.3.0/24
      Sep 20 08:59:33 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.2.0/24
      Sep 20 08:59:33 php_wg 52862 /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 192.168.3.0/24
      Sep 20 08:59:33 php 92220 //etc/rc.packages: Beginning package installation for WireGuard .

      1 Reply Last reply Reply Quote 0
      • stephenw10S Offline
        stephenw10 Netgate Administrator
        last edited by

        Too early is more likely. If you have some other link type that takes a long time to come up at boot we have seen instances of WireGuard trying to start before that has happened, failing and then just stopping rather than retrying.

        At what point during the boot are those logs from?

        I see you're using pppoe. Does that connect immediately? Are you using the new module for that?

        Have you always seen this issue or this new after an update?

        A 1 Reply Last reply Reply Quote 0
        • A Offline
          a.dresner @stephenw10
          last edited by

          @stephenw10 I always update and for years my gateways have been unreliable after reboot. Maybe one version was better than another? My settings have rarely changed over the years, a new NAT rule here or there. They either come up or don't, it was always a roll of a dice whether my wireguard would be working after reboot. But since this last update, it's consistent and across all my netgate boxes. Backed up my settings, restored, not better.

          PPOE always comes up, so does my static connection on my other location. New or old, don't know.

          I took those logs after a reboot. Happy to share more.

          1 Reply Last reply Reply Quote 0
          • stephenw10S Offline
            stephenw10 Netgate Administrator
            last edited by

            Yeah if you have more logs that would be helpful. Critically the ordering processes are run at boot is what counts.

            A 2 Replies Last reply Reply Quote 0
            • A Offline
              a.dresner @stephenw10
              last edited by

              @stephenw10

              [25.07.1-RELEASE][admin@bkk-fw.d.asia]/root: cat /var/log/dmesg.boot
              Copyright (c) 1992-2024 The FreeBSD Project.
              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
              FreeBSD is a registered trademark of The FreeBSD Foundation.
              FreeBSD 15.0-CURRENT #0 plus-RELENG_25_07_1-n256513-49844af35a5d: Fri Aug 15 19:21:04 UTC 2025
              root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-25_07_1-main/obj/amd64/DZizCvOj/var/jenkins/workspace/pfSense-Plus-snapshots-25_07_1-main/sources/FreeBSD-src-plus-RELENG_25_07_1/amd64.amd64/sys/pfSense amd64
              FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
              VT(vga): resolution 640x480
              CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.21-MHz K8-class CPU)
              Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
              Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
              Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
              AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
              AMD Features2=0x101<LAHF,Prefetch>
              Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
              Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
              XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
              IA32_ARCH_CAPS=0xc69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
              VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
              TSC: P-state invariant, performance statistics
              real memory = 8589934592 (8192 MB)
              avail memory = 8153186304 (7775 MB)
              Event timer "LAPIC" quality 600
              ACPI APIC Table: <INSYDE H2O BIOS>
              WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
              FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
              FreeBSD/SMP: 1 package(s) x 4 core(s)
              random: registering fast source Intel Secure Key RNG
              random: fast provider: "Intel Secure Key RNG"
              random: unblocking device.
              ioapic0 <Version 2.0> irqs 0-119
              Launching APs: 1 3 2
              TCP_ratelimit: Is now initialized
              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80760600, 0) error 1
              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807606b0, 0) error 1
              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80760760, 0) error 1
              iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
              iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8077fdd0, 0) error 1
              iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
              iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8077fe80, 0) error 1
              iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
              iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8077ff30, 0) error 1
              random: entropy device external interface
              wlan: mac acl policy registered
              kbd0 at kbdmux0
              WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
              efirtc0: <EFI Realtime Clock>
              efirtc0: registered as a time-of-day clock, resolution 1.000000s
              netgate0: <Netgate 6100>
              netgate0: version: 0.1
              vtvga0: <VT VGA driver>
              smbios0: <System Management BIOS> at iomem 0x7c51b000-0x7c51b017
              smbios0: Version: 3.0
              acpi0: <INSYDE H2O BIOS>
              acpi0: Power Button (fixed)
              unknown: I/O range not supported
              cpu0: <ACPI CPU> on acpi0
              hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
              Timecounter "HPET" frequency 24000000 Hz quality 950
              Event timer "HPET" frequency 24000000 Hz quality 550
              Event timer "HPET1" frequency 24000000 Hz quality 440
              Event timer "HPET2" frequency 24000000 Hz quality 440
              Event timer "HPET3" frequency 24000000 Hz quality 440
              Event timer "HPET4" frequency 24000000 Hz quality 440
              atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
              atrtc0: Warning: Couldn't map I/O.
              atrtc0: registered as a time-of-day clock, resolution 1.000000s
              Event timer "RTC" frequency 32768 Hz quality 0
              attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
              Timecounter "i8254" frequency 1193182 Hz quality 0
              Event timer "i8254" frequency 1193182 Hz quality 100
              Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
              pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
              pci0: <ACPI PCI bus> on pcib0
              pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
              pci1: <ACPI PCI bus> on pcib1
              pci1: <processor> at device 0.0 (no driver attached)
              pcib2: <ACPI PCI-PCI bridge> mem 0x81600000-0x8161ffff at device 10.0 on pci0
              pci2: <ACPI PCI bus> on pcib2
              pcib3: <ACPI PCI-PCI bridge> mem 0x81620000-0x8163ffff at device 11.0 on pci0
              pci3: <ACPI PCI bus> on pcib3
              pcib4: <ACPI PCI-PCI bridge> mem 0x81640000-0x8165ffff at device 12.0 on pci0
              pci4: <ACPI PCI bus> on pcib4
              igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff at device 0.0 on pci4
              igc0: EEPROM V1.73-0 eTrack 0x800001f0
              igc0: Using 1024 TX descriptors and 1024 RX descriptors
              igc0: Using 4 RX queues 4 TX queues
              igc0: Using MSI-X interrupts with 5 vectors
              igc0: Ethernet address: 90:ec:77:1d:1e:bc
              igc0: netmap queues/slots: TX 4/1024, RX 4/1024
              pcib5: <ACPI PCI-PCI bridge> mem 0x81660000-0x8167ffff at device 14.0 on pci0
              pci5: <ACPI PCI bus> on pcib5
              igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81100000-0x811fffff,0x81200000-0x81203fff at device 0.0 on pci5
              igc1: EEPROM V1.73-0 eTrack 0x800001f0
              igc1: Using 1024 TX descriptors and 1024 RX descriptors
              igc1: Using 4 RX queues 4 TX queues
              igc1: Using MSI-X interrupts with 5 vectors
              igc1: Ethernet address: 90:ec:77:1d:1e:bd
              igc1: netmap queues/slots: TX 4/1024, RX 4/1024
              pcib6: <ACPI PCI-PCI bridge> mem 0x81680000-0x8169ffff at device 15.0 on pci0
              pci6: <ACPI PCI bus> on pcib6
              igc2: <Intel(R) Ethernet Controller I225-V> mem 0x80f00000-0x80ffffff,0x81000000-0x81003fff at device 0.0 on pci6
              igc2: EEPROM V1.73-0 eTrack 0x800001f0
              igc2: Using 1024 TX descriptors and 1024 RX descriptors
              igc2: Using 4 RX queues 4 TX queues
              igc2: Using MSI-X interrupts with 5 vectors
              igc2: Ethernet address: 90:ec:77:1d:1e:be
              igc2: netmap queues/slots: TX 4/1024, RX 4/1024
              pcib7: <ACPI PCI-PCI bridge> mem 0x816a0000-0x816bffff at device 16.0 on pci0
              pci7: <ACPI PCI bus> on pcib7
              igc3: <Intel(R) Ethernet Controller I225-V> mem 0x80d00000-0x80dfffff,0x80e00000-0x80e03fff at device 0.0 on pci7
              igc3: EEPROM V1.73-0 eTrack 0x800001f0
              igc3: Using 1024 TX descriptors and 1024 RX descriptors
              igc3: Using 4 RX queues 4 TX queues
              igc3: Using MSI-X interrupts with 5 vectors
              igc3: Ethernet address: 90:ec:77:1d:1e:bf
              igc3: netmap queues/slots: TX 4/1024, RX 4/1024
              pcib8: <ACPI PCI-PCI bridge> mem 0x816c0000-0x816dffff at device 17.0 on pci0
              pci8: <ACPI PCI bus> on pcib8
              nvme0: <Generic NVMe Device> mem 0x80700000-0x80703fff at device 0.0 on pci8
              xhci0: <Intel Denverton USB 3.0 controller> mem 0x816e0000-0x816effff at device 21.0 on pci0
              xhci0: 32 bytes context size, 64-bit DMA
              usbus0 on xhci0
              usbus0: 5.0Gbps Super Speed USB v3.0
              pcib9: <ACPI PCI-PCI bridge> at device 22.0 on pci0
              pci9: <ACPI PCI bus> on pcib9
              ix0: <Intel(R) X553 N (SFP+)> mem 0x80400000-0x805fffff,0x80604000-0x80607fff at device 0.0 on pci9
              ix0: Using 2048 TX descriptors and 2048 RX descriptors
              ix0: Using 4 RX queues 4 TX queues
              ix0: Using MSI-X interrupts with 5 vectors
              ix0: allocated for 4 queues
              ix0: allocated for 4 rx queues
              ix0: Ethernet address: 90:ec:77:1d:1e:ba
              ix0: nvm 0.58.0 eTrack 0x8000084b
              ix0: netmap queues/slots: TX 4/2048, RX 4/2048
              ix1: <Intel(R) X553 N (SFP+)> mem 0x80200000-0x803fffff,0x80600000-0x80603fff at device 0.1 on pci9
              ix1: Using 2048 TX descriptors and 2048 RX descriptors
              ix1: Using 4 RX queues 4 TX queues
              ix1: Using MSI-X interrupts with 5 vectors
              ix1: allocated for 4 queues
              ix1: allocated for 4 rx queues
              ix1: Ethernet address: 90:ec:77:1d:1e:bb
              ix1: nvm 0.58.0 eTrack 0x8000084b
              ix1: netmap queues/slots: TX 4/2048, RX 4/2048
              pcib10: <ACPI PCI-PCI bridge> at device 23.0 on pci0
              pci10: <ACPI PCI bus> on pcib10
              ix2: <Intel(R) X553 L (1GbE)> mem 0x80a00000-0x80bfffff,0x80c04000-0x80c07fff at device 0.0 on pci10
              ix2: Using 2048 TX descriptors and 2048 RX descriptors
              ix2: Using 4 RX queues 4 TX queues
              ix2: Using MSI-X interrupts with 5 vectors
              ix2: allocated for 4 queues
              ix2: allocated for 4 rx queues
              ix2: Ethernet address: 90:ec:77:1d:1e:b9
              ix2: nvm 0.58.0 eTrack 0x80000889
              ix2: netmap queues/slots: TX 4/2048, RX 4/2048
              ix3: <Intel(R) X553 L (1GbE)> mem 0x80800000-0x809fffff,0x80c00000-0x80c03fff at device 0.1 on pci10
              ix3: Using 2048 TX descriptors and 2048 RX descriptors
              ix3: Using 4 RX queues 4 TX queues
              ix3: Using MSI-X interrupts with 5 vectors
              ix3: allocated for 4 queues
              ix3: allocated for 4 rx queues
              ix3: Ethernet address: 90:ec:77:1d:1e:b8
              ix3: nvm 0.58.0 eTrack 0x80000889
              ix3: netmap queues/slots: TX 4/2048, RX 4/2048
              pci0: <simple comms> at device 24.0 (no driver attached)
              sdhci_pci0: <Intel Denverton eMMC 5.0 Controller> mem 0x816f6000-0x816f6fff,0x816f7000-0x816f7fff at device 28.0 on pci0
              sdhci_pci0: 1 slot(s) allocated
              mmc0: <MMC/SD bus> on sdhci_pci0
              isab0: <PCI-ISA bridge> at device 31.0 on pci0
              isa0: <ISA bus> on isab0
              pci0: <memory> at device 31.2 (no driver attached)
              pci0: <serial bus> at device 31.5 (no driver attached)
              acpi_button0: <Power Button> on acpi0
              acpi_tz0: <Thermal Zone> on acpi0
              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 16 flags 0x10 on acpi0
              uart: ns8250: UART FCR is broken
              uart0: console (115200,n,8,1)
              uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 17 on acpi0
              est0: <Enhanced SpeedStep Frequency Control> on cpu0
              cpufreq0: <CPU frequency control> on cpu0
              cpufreq1: <CPU frequency control> on cpu1
              cpufreq2: <CPU frequency control> on cpu2
              cpufreq3: <CPU frequency control> on cpu3
              Timecounter "TSC-low" frequency 1099999832 Hz quality 1000
              Timecounters tick every 1.000 msec
              ugen0.1: <Intel XHCI root HUB> at usbus0
              ZFS filesystem version: 5
              ZFS storage pool version: features support (5000)
              uhub0 on usbus0
              uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
              nvme0: Allocated 16MB host memory buffer
              mmcsd0: 16GB <MMCHC TB2916 9.0 SN 2869DCD0 MFG 09/2020 by 112 0x0000> at mmc0 50.0MHz/8bit/65535-block
              mmcsd0boot0: 4MB partition 1 at mmcsd0
              mmcsd0boot1: 4MB partition 2 at mmcsd0
              mmcsd0rpmb: 4MB partition 3 at mmcsd0
              GEOM: warning: mmcsd0 lba_start 3 < required min 34
              Trying to mount root from zfs:pfSense/ROOT/default []...
              uhub0: 8 ports with 8 removable, self powered
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              Root mount waiting for: CAM
              nda0 at nvme0 bus 0 scbus0 target 0 lun 1
              nda0: <M.2 (P80) 3TE6 V20B09 BCA12107210770128>
              nda0: Serial Number BCA12107210770128
              nda0: nvme version 1.3
              nda0: 114473MB (234441648 512 byte sectors)
              Netgate Cordoba GPIO Driver 0.4 loaded
              cordbuc0: <Netgate Cordoba IO controller> at port 0x800 on isa0
              gpio0: <Cordoba uC GPIO controller> on cordbuc0
              gpiobus0: <GPIO bus> on gpio0
              gpioled0: <GPIO led> at pin 0 on gpiobus0
              gpioled1: <GPIO led> at pin 1 on gpiobus0
              gpioled10: <GPIO led> at pin 10 on gpiobus0
              gpioled11: <GPIO led> at pin 11 on gpiobus0
              gpioled2: <GPIO led> at pin 2 on gpiobus0
              gpioled3: <GPIO led> at pin 3 on gpiobus0
              gpioled4: <GPIO led> at pin 4 on gpiobus0
              gpioled5: <GPIO led> at pin 5 on gpiobus0
              gpioled6: <GPIO led> at pin 6 on gpiobus0
              gpioled7: <GPIO led> at pin 7 on gpiobus0
              gpioled8: <GPIO led> at pin 8 on gpiobus0
              gpioled9: <GPIO led> at pin 9 on gpiobus0
              gpioc0: <GPIO controller> on gpio0
              CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.00-MHz K8-class CPU)
              Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
              Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
              Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
              AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
              AMD Features2=0x101<LAHF,Prefetch>
              Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
              Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
              XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
              IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
              VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
              TSC: P-state invariant, performance statistics
              [25.07.1-RELEASE][admin@.asia]/root:

              1 Reply Last reply Reply Quote 0
              • A Offline
                a.dresner @stephenw10
                last edited by

                @stephenw10
                after I rebooted and then manually started the gateways and wireguard service:
                log.zip

                1 Reply Last reply Reply Quote 0
                • stephenw10S Offline
                  stephenw10 Netgate Administrator
                  last edited by

                  OK.

                  Which NIC is the PPPoE using?

                  Are all the WG tunnels using the PPPoE WAN?

                  What is the gateway that's expected to be available for these?

                  Oct    7 08:03:06 bkk-fw php-cgi[733]: rc.bootup: Static Routes: Gateway IP could not be found for 10.0.2.0/24
Oct    7 08:03:06 bkk-fw php-cgi[733]: rc.bootup: Static Routes: Gateway IP could not be found for 192.168.1.0/24
Oct    7 08:03:06 bkk-fw php-cgi[733]: rc.bootup: Static Routes: Gateway IP could not be found for 192.168.3.0/24

                  They are the expected remote endpoints in the WG tunnels?

                  Oct    7 08:14:29 bkk-fw php_wg[89003]: /usr/local/pkg/wireguard/includes/wg_service.inc: Removing static route for monitor 
10.0.2.1 and adding a new route through 10.100.90.1
Oct    7 08:14:29 bkk-fw php_wg[89003]: /usr/local/pkg/wireguard/includes/wg_service.inc: Removing static route for monitor 
192.168.1.1 and adding a new route through 10.100.91.1
Oct    7 08:14:30 bkk-fw php_wg[89003]: /usr/local/pkg/wireguard/includes/wg_service.inc: Removing static route for monitor 
192.168.3.1 and adding a new route through 10.101.90.0
                  A 1 Reply Last reply Reply Quote 0
                  • A Offline
                    a.dresner @stephenw10
                    last edited by

                    @stephenw10 Swapped in Unifi gateways at 4 of 5 locations and setup site magic. Dead simple, reboots fine. Going to test that for now. Big PFSense fan here, bought 2 6100 max and 2 8200 max. this wasn't an easy choice but these ongoing reboot issues are not sustainable. Thank you stephen. If I roll back, ill msg back here for some help.

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.