Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    All traffic stopped, looks a bug to me!

    Scheduled Pinned Locked Moved General pfSense Questions
    24 Posts 4 Posters 297 Views 4 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • G Offline
      GTA_doum
      last edited by

      Hello,
      I have now two pfSense from two different environment that has this strange buggy behaviour. The first one has been doing it since a long time, all LAN traffic is blocked by pfSense, no warning, no reason that could be found, no hardware issues, traffic just stops, WAN to LAN or LAN to WAN. I tried everything (yes, every detail possible, modifying or replacing) and the issue always comes back, traffic is blocked at large, the only to restart it is to restart the router.
      I taught it was only because of the environment where the pfSense was and I could not figure out what was specific to it. But since a month or two, there is now a second environment where pfSense is starting that behaviour, all LAN traffic is blocked for no reason. In System logs, it shows that the LAN NIC has been stopped and restarted, so I guess pf is not reloaded properly, which results in a complete blockage. So far, it is the best explanation I have, but I cannot find why traffic is stopped. When it happens could be at any moment of the day and the next time it would do it could be few days or many weeks later.

      Any one have seen this and what is the resolution so that it stops doing that?

      stephenw10S 1 Reply Last reply Reply Quote 0
      • stephenw10S Offline
        stephenw10 Netgate Administrator @GTA_doum
        last edited by

        @GTA_doum said in All traffic stopped, looks a bug to me!:

        In System logs, it shows that the LAN NIC has been stopped and restarted,

        What exactly is shown in the logs?

        G 1 Reply Last reply Reply Quote 0
        • G Offline
          GTA_doum @stephenw10
          last edited by

          @stephenw10 Nov 19 22:50:42 kernel re1: link state changed to DOWN
          Nov 19 22:50:42 kernel re1: watchdog timeout
          Nov 19 22:50:42 check_reload_status 1050 Linkup starting re1
          Nov 19 22:50:13 check_reload_status 1050 Reloading filter
          Nov 19 22:50:13 php-fpm 27945 /rc.newipsecdns: IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.

          patient0P 1 Reply Last reply Reply Quote 0
          • patient0P Offline
            patient0 @GTA_doum
            last edited by

            @GTA_doum if I read it correct the device has a RealTek (dua port?) network card. Support for them is notorious bad in FreeBSD. What RealTek NIC is it?

            There is an alternative RealTek driver you can install, see
            https://forum.netgate.com/post/1229634

            pkg install realtek-re-kmod

            And if it works better with that driver, make it permanent:

            echo 'if_re_load="YES"' >> /boot/loader.conf.local
echo 'if_re_name="/boot/modules/if_re.ko"' >> /boot/loader.conf.local

            But your best option is to use an Intel network card.

            G 1 Reply Last reply Reply Quote 4
            • G Offline
              GTA_doum @patient0
              last edited by GTA_doum

              @patient0 I tried other hardware, did not make any difference. To make it even more crazy, the first site where it is happening, they have two sites connected via IPSec. The two pfSense have exactly the same hardware, but only one of the two makes this issue! I tried replacing everything one by one, even the router itself, NIC, network cables, switch... Issue is always coming back.
              I will try this driver, but with everything I tried, I would surprise it changes anything.

              Few months ago, another pfSense started behaving with the same issue and it is unrelated to the first site. It was working great since its first install one or two years ago!

              patient0P 1 Reply Last reply Reply Quote 0
              • patient0P Offline
                patient0 @GTA_doum
                last edited by

                @GTA_doum said in All traffic stopped, looks a bug to me!:

                I tried other hardware,

                And the other hardware did not have a RealTek nic?

                The log you posted shows that re1 has a watchdog timeout and that is a typical RealTek driver issue (run a search for 'kernel re watchdog timeout' in this forum, sort for post time).
                That would indicate that in that case the network card did play a role in the issue.

                G 1 Reply Last reply Reply Quote 0
                • G Offline
                  GTA_doum @patient0
                  last edited by GTA_doum

                  @patient0 I just checked and yes, the mini computer I used to test has a Realtek NIC (most onboard NIC have Realtek cards, even a lof of USB adapter have a Realtek chipset in them). On the first site mentioned, I can install another NIC and will try an Intel one. For mini-computers, I cannot unfortunetely install another NIC, there is no space in those box to install a PCIe card.
                  What I fail to understand is why a pfSense was working for over a year and suddenly starts acting up...

                  G 1 Reply Last reply Reply Quote 0
                  • G Offline
                    GTA_doum @GTA_doum
                    last edited by

                    I just recalled what we did at that place few months ago, we upgraded pfSense to 2.8.0 and lately to 2.8.1. Which means the Realtek driver in 2.8 is indeed misbehaving, if the driver is the cause.
                    The first site I mentioned was always acting up, even with version 2.7 of pfSense.

                    tinfoilmattT 1 Reply Last reply Reply Quote 0
                    • tinfoilmattT Offline
                      tinfoilmatt @GTA_doum
                      last edited by

                      @GTA_doum Sooooooo, not a bug then.

                      G 1 Reply Last reply Reply Quote 0
                      • G Offline
                        GTA_doum @tinfoilmatt
                        last edited by

                        @tinfoilmatt Well, if the driver has a bug, that is included in pfSense/BSD, it is still a bug...

                        tinfoilmattT 1 Reply Last reply Reply Quote 0
                        • tinfoilmattT Offline
                          tinfoilmatt @GTA_doum
                          last edited by

                          @GTA_doum If Netgate has provided you with a modified driver that resolves your issue, then perhaps FreeBSD's issue tracker will be receptive to your report.

                          G 1 Reply Last reply Reply Quote 0
                          • G Offline
                            GTA_doum @tinfoilmatt
                            last edited by

                            @tinfoilmatt I'll gladly do it once confirmed. It will take few months to confirm, as the issue sometimes could happen after few weeks. It's been few times I taught it was fixed, but then reappeared. I am still unsure what triggers it, maybe the amount of traffic, but really, I could not make a link of cause to effect.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S Offline
                              stephenw10 Netgate Administrator
                              last edited by

                              I mean there is a bug there but it's known. The Realtek hardware is such that there is little motivation for devs to fix it. And the newer Realtek NICs are better anyway.

                              But, yes, if you see that watchdog error from the re(4) driver then definitely try the alternative driver.

                              1 Reply Last reply Reply Quote 0
                              • G Offline
                                GTA_doum
                                last edited by GTA_doum

                                At the second site, I've tried to install the package, it went fine. I added the two lines in loader.conf.local and rebooted, LAN was not reachable. I had to remove the two lines in locader.conf.local and reboot to have access to the LAN again. I also tried to add the lines to loader.conf, same results.
                                Any suggestions as to what happened?

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S Offline
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  Was there anything logged at boot? What NIC(s) does that device have exactly?

                                  Was that site also showing the Realtek watchdog errors sing the standard driver?

                                  G 1 Reply Last reply Reply Quote 0
                                  • G Offline
                                    GTA_doum @stephenw10
                                    last edited by

                                    @stephenw10 I kept a copy of dmesg output before I rebooted it. I'll try to paste it here... Yes, both sites have showed the watchdog error before blocking all traffic to the LAN NIC.

                                    G 1 Reply Last reply Reply Quote 0
                                    • G Offline
                                      GTA_doum @GTA_doum
                                      last edited by GTA_doum

                                      This is dmesg after booting with two lines in loader.conf :

                                      ---<<BOOT>>---
                                      Copyright (c) 1992-2024 The FreeBSD Project.
                                      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                      The Regents of the University of California. All rights reserved.
                                      FreeBSD is a registered trademark of The FreeBSD Foundation.
                                      FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                                      root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                                      FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                                      VT(efifb): resolution 800x600
                                      CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.85-MHz K8-class CPU)
                                      Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                      Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                      AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                      AMD Features2=0x21<LAHF,ABM>
                                      Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                      XSAVE Features=0x1<XSAVEOPT>
                                      VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                      TSC: P-state invariant, performance statistics
                                      real memory = 4294967296 (4096 MB)
                                      avail memory = 3989393408 (3804 MB)
                                      Event timer "LAPIC" quality 600
                                      ACPI APIC Table: <ALASKA A M I >
                                      FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                                      FreeBSD/SMP: 1 package(s) x 2 core(s)
                                      random: registering fast source Intel Secure Key RNG
                                      random: fast provider: "Intel Secure Key RNG"
                                      random: unblocking device.
                                      WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                      WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                      ioapic0 <Version 2.0> irqs 0-39
                                      Launching APs: 1
                                      TCP_ratelimit: Is now initialized
                                      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                                      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                                      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                                      iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                      iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                                      iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                      iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                                      iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                      iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                      module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                                      random: entropy device external interface
                                      wlan: mac acl policy registered
                                      kbd1 at kbdmux0
                                      WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                                      efirtc0: <EFI Realtime Clock>
                                      efirtc0: registered as a time-of-day clock, resolution 1.000000s
                                      netgate0: <unknown hardware>
                                      netgate0: version: 0.1
                                      smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                                      smbios0: Version: 2.8, BCD Revision: 2.8
                                      acpi0: <ALASKA A M I >
                                      acpi0: Power Button (fixed)
                                      cpu0: <ACPI CPU> on acpi0
                                      hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                                      Timecounter "HPET" frequency 14318180 Hz quality 950
                                      Event timer "HPET" frequency 14318180 Hz quality 550
                                      Event timer "HPET1" frequency 14318180 Hz quality 440
                                      Event timer "HPET2" frequency 14318180 Hz quality 440
                                      Event timer "HPET3" frequency 14318180 Hz quality 440
                                      Event timer "HPET4" frequency 14318180 Hz quality 440
                                      Event timer "HPET5" frequency 14318180 Hz quality 440
                                      Event timer "HPET6" frequency 14318180 Hz quality 440
                                      atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                                      atrtc0: Warning: Couldn't map I/O.
                                      atrtc0: registered as a time-of-day clock, resolution 1.000000s
                                      Event timer "RTC" frequency 32768 Hz quality 0
                                      attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                                      Timecounter "i8254" frequency 1193182 Hz quality 0
                                      Event timer "i8254" frequency 1193182 Hz quality 100
                                      Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                                      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                                      pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                                      pci0: <ACPI PCI bus> on pcib0
                                      vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                                      vgapci0: Boot video device
                                      hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                                      xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                                      xhci0: 32 bytes context size, 64-bit DMA
                                      xhci0: Port routing mask set to 0xffffffff
                                      usbus0 on xhci0
                                      usbus0: 5.0Gbps Super Speed USB v3.0
                                      pci0: <simple comms> at device 22.0 (no driver attached)
                                      hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                                      pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                                      pci1: <ACPI PCI bus> on pcib1
                                      re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                                      re0: Using 1 MSI-X message
                                      re0: turning off MSI enable bit.
                                      re0: Chip rev. 0x54000000
                                      re0: MAC rev. 0x00100000
                                      miibus0: <MII bus> on re0
                                      rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
                                      rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                      re0: Using defaults for TSO: 65518/35/2048
                                      re0: Ethernet address: 00:e0:4c:33:1f:c4
                                      re0: netmap queues/slots: TX 1/256, RX 1/256
                                      pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                                      pci2: <ACPI PCI bus> on pcib2
                                      re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                                      re1: Using 1 MSI-X message
                                      re1: turning off MSI enable bit.
                                      re1: Chip rev. 0x54000000
                                      re1: MAC rev. 0x00100000
                                      miibus1: <MII bus> on re1
                                      rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
                                      rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                      re1: Using defaults for TSO: 65518/35/2048
                                      re1: Ethernet address: 00:e0:4c:33:1f:c5
                                      re1: netmap queues/slots: TX 1/256, RX 1/256
                                      ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                                      usbus1: EHCI version 1.0
                                      usbus1 on ehci0
                                      usbus1: 480Mbps High Speed USB v2.0
                                      isab0: <PCI-ISA bridge> at device 31.0 on pci0
                                      isa0: <ISA bus> on isab0
                                      ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                                      ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                                      ahcich1: <AHCI channel> at channel 1 on ahci0
                                      acpi_button0: <Sleep Button> on acpi0
                                      acpi_button1: <Power Button> on acpi0
                                      acpi_tz0: <Thermal Zone> on acpi0
                                      acpi_tz1: <Thermal Zone> on acpi0
                                      atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                                      atkbd0: <AT Keyboard> irq 1 on atkbdc0
                                      kbd0 at atkbd0
                                      atkbd0: [GIANT-LOCKED]
                                      uart: ns8250: UART FCR is broken
                                      uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                      uart: ns8250: UART FCR is broken
                                      uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                                      est0: <Enhanced SpeedStep Frequency Control> on cpu0
                                      cpufreq0: <CPU frequency control> on cpu0
                                      cpufreq1: <CPU frequency control> on cpu1
                                      Timecounter "TSC" frequency 1396766502 Hz quality 1000
                                      Timecounters tick every 1.000 msec
                                      ugen1.1: <Intel EHCI root HUB> at usbus1
                                      ugen0.1: <Intel XHCI root HUB> at usbus0
                                      uhub0 on usbus1
                                      uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                                      uhub1 on usbus0
                                      uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                                      ZFS filesystem version: 5
                                      ZFS storage pool version: features support (5000)
                                      hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                                      hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                                      pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                                      hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                                      hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                                      pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                                      Trying to mount root from zfs:pfSense/ROOT/default []...
                                      ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                                      ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                                      ada0: Serial Number 2021011201184
                                      ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                                      ada0: Command Queueing enabled
                                      ada0: 30029MB (61500000 512 byte sectors)
                                      uhub1: 13 ports with 13 removable, self powered
                                      uhub0: 2 ports with 2 removable, self powered
                                      ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                                      uhub2 on uhub1
                                      uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                                      Root mount waiting for: usbus0 usbus1
                                      ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                                      uhub3 on uhub0
                                      uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                                      uhub2: 4 ports with 4 removable, self powered
                                      uhub3: 8 ports with 8 removable, self powered
                                      ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0
                                      ukbd0 on uhub1
                                      ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
                                      kbd2 at ukbd0
                                      uhid0 on uhub1
                                      uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
                                      CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                                      Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                      Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                      AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                      AMD Features2=0x21<LAHF,ABM>
                                      Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                      Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                                      XSAVE Features=0x1<XSAVEOPT>
                                      VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                      TSC: P-state invariant, performance statistics
                                      ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                                      smbus0: <System Management Bus> on ichsmb0
                                      wg0: changing name to 'tun_wg0'
                                      tun_wg0: link state changed to UP
                                      re0: link state changed to UP
                                      re1: link state changed to UP
                                      re0: link state changed to DOWN
                                      lo0: link state changed to UP
                                      re1: link state changed to DOWN
                                      pflog0: promiscuous mode enabled
                                      re0: link state changed to UP
                                      re1: link state changed to UP
                                      tun_wg0: link state changed to DOWN
                                      wg0: changing name to 'tun_wg0'
                                      tun_wg0: link state changed to UP
                                      ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0 (disconnected)
                                      ukbd0: at uhub1, port 3, addr 2 (disconnected)
                                      ukbd0: detached
                                      uhid0: at uhub1, port 3, addr 2 (disconnected)
                                      uhid0: detached
                                      tun_wg0: link state changed to DOWN
                                      pflog0: promiscuous mode disabled
                                      Waiting (max 60 seconds) for system process vnlru' to stop... done Waiting (max 60 seconds) for system process syncer' to stop...
                                      Syncing disks, vnodes remaining... 0 0 done
                                      All buffers synced.
                                      Uptime: 9m13s
                                      uhub3: detached
                                      uhub0: detached
                                      re1: link state changed to DOWN
                                      re1: link state changed to UP
                                      re0: link state changed to DOWN

                                      G 1 Reply Last reply Reply Quote 0
                                      • G Offline
                                        GTA_doum @GTA_doum
                                        last edited by GTA_doum

                                        This is the next boot, after creating loader.conf.local with the two lines :

                                        ---<<BOOT>>---
                                        Copyright (c) 1992-2024 The FreeBSD Project.
                                        Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                        The Regents of the University of California. All rights reserved.
                                        FreeBSD is a registered trademark of The FreeBSD Foundation.
                                        FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                                        root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                                        FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                                        VT(efifb): resolution 800x600
                                        CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.86-MHz K8-class CPU)
                                        Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                        Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                        Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                        AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                        AMD Features2=0x21<LAHF,ABM>
                                        Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                        XSAVE Features=0x1<XSAVEOPT>
                                        VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                        TSC: P-state invariant, performance statistics
                                        real memory = 4294967296 (4096 MB)
                                        avail memory = 3987218432 (3802 MB)
                                        Event timer "LAPIC" quality 600
                                        ACPI APIC Table: <ALASKA A M I >
                                        FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                                        FreeBSD/SMP: 1 package(s) x 2 core(s)
                                        random: registering fast source Intel Secure Key RNG
                                        random: fast provider: "Intel Secure Key RNG"
                                        random: unblocking device.
                                        WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                        WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                        ioapic0 <Version 2.0> irqs 0-39
                                        Launching APs: 1
                                        TCP_ratelimit: Is now initialized
                                        ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                        ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                                        ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                        ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                                        ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                        ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                                        iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                        iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                                        iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                        iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                                        iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                        iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                                        random: entropy device external interface
                                        wlan: mac acl policy registered
                                        kbd1 at kbdmux0
                                        WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                                        efirtc0: <EFI Realtime Clock>
                                        efirtc0: registered as a time-of-day clock, resolution 1.000000s
                                        netgate0: <unknown hardware>
                                        netgate0: version: 0.1
                                        smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                                        smbios0: Version: 2.8, BCD Revision: 2.8
                                        acpi0: <ALASKA A M I >
                                        acpi0: Power Button (fixed)
                                        cpu0: <ACPI CPU> on acpi0
                                        hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                                        Timecounter "HPET" frequency 14318180 Hz quality 950
                                        Event timer "HPET" frequency 14318180 Hz quality 550
                                        Event timer "HPET1" frequency 14318180 Hz quality 440
                                        Event timer "HPET2" frequency 14318180 Hz quality 440
                                        Event timer "HPET3" frequency 14318180 Hz quality 440
                                        Event timer "HPET4" frequency 14318180 Hz quality 440
                                        Event timer "HPET5" frequency 14318180 Hz quality 440
                                        Event timer "HPET6" frequency 14318180 Hz quality 440
                                        atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                                        atrtc0: Warning: Couldn't map I/O.
                                        atrtc0: registered as a time-of-day clock, resolution 1.000000s
                                        Event timer "RTC" frequency 32768 Hz quality 0
                                        attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                                        Timecounter "i8254" frequency 1193182 Hz quality 0
                                        Event timer "i8254" frequency 1193182 Hz quality 100
                                        Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                                        acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                                        pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                                        pci0: <ACPI PCI bus> on pcib0
                                        vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                                        vgapci0: Boot video device
                                        hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                                        xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                                        xhci0: 32 bytes context size, 64-bit DMA
                                        xhci0: Port routing mask set to 0xffffffff
                                        usbus0 on xhci0
                                        usbus0: 5.0Gbps Super Speed USB v3.0
                                        pci0: <simple comms> at device 22.0 (no driver attached)
                                        hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                                        pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                                        pci1: <ACPI PCI bus> on pcib1
                                        re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                                        re0: Using Memory Mapping!
                                        re0: Using 1 MSI-X message
                                        re0: version:1.100.00
                                        re0: Ethernet address: 00:e0:4c:33:1f:c4

                                        This product is covered by one or more of the following patents:
                                        US6,570,884, US6,115,776, and US6,327,625.
                                        re0: Using defaults for TSO: 65518/35/2048
                                        re0: Ethernet address: 00:e0:4c:33:1f:c4
                                        pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                                        pci2: <ACPI PCI bus> on pcib2
                                        re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                                        re1: Using Memory Mapping!
                                        re1: Using 1 MSI-X message
                                        re1: version:1.100.00
                                        re1: Ethernet address: 00:e0:4c:33:1f:c5

                                        This product is covered by one or more of the following patents:
                                        US6,570,884, US6,115,776, and US6,327,625.
                                        re1: Using defaults for TSO: 65518/35/2048
                                        re1: Ethernet address: 00:e0:4c:33:1f:c5
                                        ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                                        usbus1: EHCI version 1.0
                                        usbus1 on ehci0
                                        usbus1: 480Mbps High Speed USB v2.0
                                        isab0: <PCI-ISA bridge> at device 31.0 on pci0
                                        isa0: <ISA bus> on isab0
                                        ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                                        ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                                        ahcich1: <AHCI channel> at channel 1 on ahci0
                                        acpi_button0: <Sleep Button> on acpi0
                                        acpi_button1: <Power Button> on acpi0
                                        acpi_tz0: <Thermal Zone> on acpi0
                                        acpi_tz1: <Thermal Zone> on acpi0
                                        atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                                        atkbd0: <AT Keyboard> irq 1 on atkbdc0
                                        kbd0 at atkbd0
                                        atkbd0: [GIANT-LOCKED]
                                        uart: ns8250: UART FCR is broken
                                        uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                        uart: ns8250: UART FCR is broken
                                        uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                                        est0: <Enhanced SpeedStep Frequency Control> on cpu0
                                        cpufreq0: <CPU frequency control> on cpu0
                                        cpufreq1: <CPU frequency control> on cpu1
                                        Timecounter "TSC" frequency 1396766503 Hz quality 1000
                                        Timecounters tick every 1.000 msec
                                        ugen0.1: <Intel XHCI root HUB> at usbus0
                                        ugen1.1: <Intel EHCI root HUB> at usbus1
                                        uhub0 on usbus0
                                        uhub1 on usbus1
                                        uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                                        uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                                        ZFS filesystem version: 5
                                        ZFS storage pool version: features support (5000)
                                        hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                                        hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                                        pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                                        hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                                        hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                                        pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                                        Trying to mount root from zfs:pfSense/ROOT/default []...
                                        ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                                        ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                                        ada0: Serial Number 2021011201184
                                        ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                                        ada0: Command Queueing enabled
                                        ada0: 30029MB (61500000 512 byte sectors)
                                        uhub0: 13 ports with 13 removable, self powered
                                        uhub1: 2 ports with 2 removable, self powered
                                        ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                                        uhub2 on uhub0
                                        uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                                        Root mount waiting for: usbus0 usbus1
                                        ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                                        uhub3 on uhub1
                                        uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                                        uhub2: 4 ports with 4 removable, self powered
                                        uhub3: 8 ports with 8 removable, self powered
                                        CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                                        Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                        Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                        Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                        AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                        AMD Features2=0x21<LAHF,ABM>
                                        Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                        Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                                        XSAVE Features=0x1<XSAVEOPT>
                                        VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                        TSC: P-state invariant, performance statistics
                                        ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                                        smbus0: <System Management Bus> on ichsmb0
                                        wg0: changing name to 'tun_wg0'
                                        tun_wg0: link state changed to UP
                                        lo0: link state changed to UP
                                        re0: link state changed to UP
                                        re1: link state changed to UP
                                        pflog0: promiscuous mode enabled
                                        tun_wg0: link state changed to DOWN
                                        wg0: changing name to 'tun_wg0'
                                        tun_wg0: link state changed to UP
                                        Limiting ICMPv6 destination unreachable output from 109 to 99 packets/sec

                                        G 1 Reply Last reply Reply Quote 0
                                        • G Offline
                                          GTA_doum @GTA_doum
                                          last edited by GTA_doum

                                          And this is dmesg after deleting the loader.conf.local file. Sorry for reposts, the previous dmesg showed many boots, but this last time, only the last boot, so I got confused and took me a while to make sense out of all those dmesg outputs.

                                          ---<<BOOT>>---
                                          Copyright (c) 1992-2024 The FreeBSD Project.
                                          Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                          The Regents of the University of California. All rights reserved.
                                          FreeBSD is a registered trademark of The FreeBSD Foundation.
                                          FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                                          root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                                          FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                                          VT(efifb): resolution 800x600
                                          CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.81-MHz K8-class CPU)
                                          Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                          Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                          Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                          AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                          AMD Features2=0x21<LAHF,ABM>
                                          Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                          XSAVE Features=0x1<XSAVEOPT>
                                          VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                          TSC: P-state invariant, performance statistics
                                          real memory = 4294967296 (4096 MB)
                                          avail memory = 3989311488 (3804 MB)
                                          Event timer "LAPIC" quality 600
                                          ACPI APIC Table: <ALASKA A M I >
                                          FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                                          FreeBSD/SMP: 1 package(s) x 2 core(s)
                                          random: registering fast source Intel Secure Key RNG
                                          random: fast provider: "Intel Secure Key RNG"
                                          random: unblocking device.
                                          WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                          WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                          ioapic0 <Version 2.0> irqs 0-39
                                          Launching APs: 1
                                          TCP_ratelimit: Is now initialized
                                          ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                          ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                                          ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                          ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                                          ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                          ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                                          iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                          iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                                          iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                          iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                                          iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                          iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                                          random: entropy device external interface
                                          wlan: mac acl policy registered
                                          kbd1 at kbdmux0
                                          WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                                          efirtc0: <EFI Realtime Clock>
                                          efirtc0: registered as a time-of-day clock, resolution 1.000000s
                                          netgate0: <unknown hardware>
                                          netgate0: version: 0.1
                                          smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                                          smbios0: Version: 2.8, BCD Revision: 2.8
                                          acpi0: <ALASKA A M I >
                                          acpi0: Power Button (fixed)
                                          cpu0: <ACPI CPU> on acpi0
                                          hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                                          Timecounter "HPET" frequency 14318180 Hz quality 950
                                          Event timer "HPET" frequency 14318180 Hz quality 550
                                          Event timer "HPET1" frequency 14318180 Hz quality 440
                                          Event timer "HPET2" frequency 14318180 Hz quality 440
                                          Event timer "HPET3" frequency 14318180 Hz quality 440
                                          Event timer "HPET4" frequency 14318180 Hz quality 440
                                          Event timer "HPET5" frequency 14318180 Hz quality 440
                                          Event timer "HPET6" frequency 14318180 Hz quality 440
                                          atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                                          atrtc0: Warning: Couldn't map I/O.
                                          atrtc0: registered as a time-of-day clock, resolution 1.000000s
                                          Event timer "RTC" frequency 32768 Hz quality 0
                                          attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                                          Timecounter "i8254" frequency 1193182 Hz quality 0
                                          Event timer "i8254" frequency 1193182 Hz quality 100
                                          Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                                          acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                                          pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                                          pci0: <ACPI PCI bus> on pcib0
                                          vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                                          vgapci0: Boot video device
                                          hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                                          xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                                          xhci0: 32 bytes context size, 64-bit DMA
                                          xhci0: Port routing mask set to 0xffffffff
                                          usbus0 on xhci0
                                          usbus0: 5.0Gbps Super Speed USB v3.0
                                          pci0: <simple comms> at device 22.0 (no driver attached)
                                          hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                                          pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                                          pci1: <ACPI PCI bus> on pcib1
                                          re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                                          re0: Using 1 MSI-X message
                                          re0: turning off MSI enable bit.
                                          re0: Chip rev. 0x54000000
                                          re0: MAC rev. 0x00100000
                                          miibus0: <MII bus> on re0
                                          rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
                                          rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                          re0: Using defaults for TSO: 65518/35/2048
                                          re0: Ethernet address: 00:e0:4c:33:1f:c4
                                          re0: netmap queues/slots: TX 1/256, RX 1/256
                                          pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                                          pci2: <ACPI PCI bus> on pcib2
                                          re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                                          re1: Using 1 MSI-X message
                                          re1: turning off MSI enable bit.
                                          re1: Chip rev. 0x54000000
                                          re1: MAC rev. 0x00100000
                                          miibus1: <MII bus> on re1
                                          rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
                                          rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                          re1: Using defaults for TSO: 65518/35/2048
                                          re1: Ethernet address: 00:e0:4c:33:1f:c5
                                          re1: netmap queues/slots: TX 1/256, RX 1/256
                                          ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                                          usbus1: EHCI version 1.0
                                          usbus1 on ehci0
                                          usbus1: 480Mbps High Speed USB v2.0
                                          isab0: <PCI-ISA bridge> at device 31.0 on pci0
                                          isa0: <ISA bus> on isab0
                                          ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                                          ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                                          ahcich1: <AHCI channel> at channel 1 on ahci0
                                          acpi_button0: <Sleep Button> on acpi0
                                          acpi_button1: <Power Button> on acpi0
                                          acpi_tz0: <Thermal Zone> on acpi0
                                          acpi_tz1: <Thermal Zone> on acpi0
                                          atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                                          atkbd0: <AT Keyboard> irq 1 on atkbdc0
                                          kbd0 at atkbd0
                                          atkbd0: [GIANT-LOCKED]
                                          uart: ns8250: UART FCR is broken
                                          uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                          uart: ns8250: UART FCR is broken
                                          uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                                          est0: <Enhanced SpeedStep Frequency Control> on cpu0
                                          cpufreq0: <CPU frequency control> on cpu0
                                          cpufreq1: <CPU frequency control> on cpu1
                                          Timecounter "TSC" frequency 1396766529 Hz quality 1000
                                          Timecounters tick every 1.000 msec
                                          ugen1.1: <Intel EHCI root HUB> at usbus1
                                          ugen0.1: <Intel XHCI root HUB> at usbus0
                                          uhub0 on usbus1
                                          uhub1 on usbus0
                                          uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                                          uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                                          ZFS filesystem version: 5
                                          ZFS storage pool version: features support (5000)
                                          hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                                          hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                                          pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                                          hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                                          hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                                          pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                                          Trying to mount root from zfs:pfSense/ROOT/default []...
                                          ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                                          ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                                          ada0: Serial Number 2021011201184
                                          ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                                          ada0: Command Queueing enabled
                                          ada0: 30029MB (61500000 512 byte sectors)
                                          uhub1: 13 ports with 13 removable, self powered
                                          uhub0: 2 ports with 2 removable, self powered
                                          ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                                          uhub2 on uhub1
                                          uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                                          Root mount waiting for: usbus0 usbus1
                                          ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                                          uhub3 on uhub0
                                          uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                                          uhub2: 4 ports with 4 removable, self powered
                                          uhub3: 8 ports with 8 removable, self powered
                                          CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                                          Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                          Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                          Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                          AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                          AMD Features2=0x21<LAHF,ABM>
                                          Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                          Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                                          XSAVE Features=0x1<XSAVEOPT>
                                          VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                          TSC: P-state invariant, performance statistics
                                          ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                                          smbus0: <System Management Bus> on ichsmb0
                                          wg0: changing name to 'tun_wg0'
                                          tun_wg0: link state changed to UP
                                          re0: link state changed to UP
                                          re1: link state changed to UP
                                          re0: link state changed to DOWN
                                          lo0: link state changed to UP
                                          re1: link state changed to DOWN
                                          pflog0: promiscuous mode enabled
                                          re0: link state changed to UP
                                          re1: link state changed to UP
                                          re0: link state changed to DOWN
                                          re0: link state changed to UP
                                          tun_wg0: link state changed to DOWN
                                          wg0: changing name to 'tun_wg0'
                                          tun_wg0: link state changed to UP

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S Offline
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Hmm, nothing obvious there then. Both NICs link UP OK using both drivers.

                                            I would disable the on-board audio hardware since that only consuming resources but it's unlikely to be causing this.

                                            Anything in the system log after boot when using the alternative driver?

                                            G tinfoilmattT 2 Replies Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.