PFsense 1.2.3 Release stops at configuring WAN interface…


  • Banned

    Under the install of LiveCD, it will reboot automatically and under the boot from the HD, it stops at the WAN interface….

    Why??? It just sits there. Nothing happens.....Tried all the RC's and still the same.

    System is IBM Xseries 335 1U server and the funny thing is, X345 with exactly the same HW but a 2U server, works just fine....



  • I've got the same server ad the same problem….
    have you resolved this?
    Bye!


  • Banned

    Nope…..I changed to X345 and the problem vent away :) Weird because it is the same hardware....



  • @Supermule:

    Nope…..I changed to X345 and the problem vent away :) Weird because it is the same hardware....

    Now i've loaded configuration to a virtual machine, but i've tried that in safe mode firewall starts, but i don't know if the performances are adequate in this mode.


  • Banned

    I run my PFSenses in VmWare….. I gave up on the X335's. Ran it on the X345 and it worked great, but i needed the easy admin of Virtual Center Server... It is easy getting to the console via encrypted VPN, so I chose that way of doing it. Never going back....


Locked