Inbound port forwarding with Dual Lan Setup?
-
I have been searching on this, but I havnt found an answer.
I have a Dual Lan Pfense box setup like this:
WAN –-> PfSense --> LAN (192.168.0.1/24)
|
-> OPT1 (Wireless 192.168.1.1/24)I have some ports forwards setup just fine from the public ip on WAN to the LAN subnet, but for the life of me, I cant get a port forward setup to go from the WAN Public IP to the OPT1 interface? Anything special I need to do here?
I've setup the port forwards just like the working ones going from WAN to LAN, and I have checked the firewall rules to log. I can see the packets being logged as accepted in the firewall logs? Anything I am missing here?
-
Nothing special here. It just works if it's set up correctly. Show us your portforwardrules, your firewallrules and tell us what version you are on.
-
I am running RC2. Whats the easiest way to post my portforward rules and firewall rules? Just post the XML that backup/restore spits out?
-
After screwing around with it a little bit more, I realized that I have captive portal running on the OPT1 interface. If I turn captive portal off, the NAT seems to work.
Any way to have Captive Portal and NAT working on the same subnet? I saw there is an option to traffic to/from an IP address is captive portal, would that allow this to work?
-
It should work if you add your nat destinations as passthrough IPs or macs.
-
Destinations are passthru MAC's so I am not sure what could be up… Let me know if I can post any info.
-
Try to add pass through IPs for these hosts as well.