4 IP phones behind PFSense, only 1 can connect to PBX
-
We have a hosted PBX that we connect to with 3 SPA-942's and one Aastra 57i CT and with the newest release for PFSense 2.0 (today's release) we cannot connect more than 1 IP phone to the PBX at a time.
-
Probably #1 here, or you may need siproxd if the provider breaks when rewriting source port on SIP.
http://doc.pfsense.org/index.php/VoIP_Configuration -
Do the SIP phones have seperat port forward rules in the firewall???
In my setup, the SIP phones connect to the same pbx, but on different fixed LAN addresses. I just forward the incoming IP address to the standalone SIP phone.
-
Thanks for the ideas, I'm back in the office tomorrow (Wednesday) and will try those two ideas. I REALLY like 2.0 so far, I'm running it at my home and it's great.
-
I havent tested it yet…. All the menus on the left side i missing. Pretty weird....
-
Simply installing and enabling siproxd did not fix the issue. I had to turn off the static port map for port 5060 and everything works now.
Firewall->NAT->Manual Outbound NAT rule generation and then click on the rule for port 5060 and uncheck Static Port.