Freeswitch package features.xml explanation please
-
Hi all, and mostly mcrane ;)
In the features.xml of the pfsense package I can see this example:
<extension name="dx"><condition field="destination_number" expression="^dx$"><action application="answer"><action application="read" data="11 11 'tone_stream://%(10000,0,350,440)' digits 5000 #"><action application="execute_extension" data="is_transfer XML features"></action></action></action></condition></extension>
This feature is definetly one that I need, but how do I use it?
What do I press during the call?
-
What device are you using? Linksys Pap2t per chance?
-
I have a couple of devices, one is a Linksys SPA901 (the simplest unit), there are also a Gigaset Dect unit (one is S65, two others are gigaset3000), and also an SNOM unit.
-
no input on this?
-
Honestly I hadn't tried that method because my phone have transfer. But I took and experimented a bit for you and found the solution.
The feature you are referring to is in the features.xml file with an extension name of 'dx' in the main dialplan under Local_Extension is a meta application that calls uses the 'dx' extension name.
When you are in a call dial *1 you will then hear a new dial tone dial the number followed by #.
Your phone may need to allow * plus the single digit in its dialplan. On the linksys phones this is represented with a *x. Here is my dialplan from a linksys spa962. Extension -> Dial Plan:
(*xxxxxxx|*xxxxxx|*xxxxx|*xxxx|*xxx|xx|*x|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)