IP-Blocklist

gsgleason

Thank you so much, TommyBoy! I needed this to find what was being blocked and preventing me from playing modern warfare 2. =)

[EDIT]

Here is my whitelist to allow Ps3 online play. These were blocked by bt_level1.gz.

store.playstation.com:199.108.4.76-199.108.4.76
ena.net.playstation.net:198.107.158.197-198.107.158.198
ena.net.playstation.net:198.107.158.166-198.107.158.166
xmb.dl.playstation.net:208.111.185.235-208.111.185.235
xmb.dl.playstation.net:208.111.185.249-208.111.185.249

woodmouze

Can't uninstall ipblocklist…
I didn't find Countryblock right away, so installed ipblocklist instead...
After that, I found countryblock - and this was what I needed...

ipblocklist is uninstalled, but still accessible from within the gui... can I remove it somehow ?

forgot to mention : i'm running it on the 1.2.3 platform, on a dual xeon server.

tommyboy180

@woodmouze:

Can't uninstall ipblocklist…
I didn't find Countryblock right away, so installed ipblocklist instead...
After that, I found countryblock - and this was what I needed...

ipblocklist is uninstalled, but still accessible from within the gui... can I remove it somehow ?

I think I know the problem. It's due to me changing the naming convention for 1.2.3 so I could push a differnt IP-Blocklist for BETA2.0.
You can edit your config.xml file and edit our the IP-Blocklist portion. Try re-installing and uninstalling if you're uncomfortable with editing your config.

woodmouze

Don't mind fiddling within CONFIG.XML… I'll try this...
Uninstalling, re-installing and uninstalling didn't help yesterday... so i'll dig into the config.xml - thanks.

I'll have to look into CountryBlock too- but I'll post the why's and how's in the other thread later on ;)

thank you for your reply.

greengolftee87

Beginner problems here.

Usage
Add direct link to list and press (Example: Level1, Level2, Level3)
Compressed lists should have .gz extention and follows PeerBlock syntax

Warning! - Apply after firewall change or state reset. Use at your own risk.

Current Status = Running

You are blocking 0 Networks/IPs

Q: How do I know if the list got applied?
A: The package web interface will display the current status.
Links i've attempted to use
http://list11.iblocklist.com/files/bt_spyware.gz
http://iblocklist.whitacrecomputers.com/files/bt_level3.gz
and several other i've verified are in the correct format including small handmade lists hosted on the LAN

Running Pfsense 1.2.3
Other packages installed: Dashboard
built on Sun Dec 6 23:21:36 EST 2009
FreeBSD 7.2-RELEASE-p5 i386

Q: I have the "Enable" check box checked but I don't think its blocking any IPs
A: Any Errors will be at the bottom of the page when you press Save/Update
I get no error messages after Save/Update

RonpfS

Same problem here on 1.2.3 Release
Doesn't block anything
Doesn't uninstall correctly, IP BlockList still available in menu

got this in the log: Dec 5 14:05:45 root: IP-Blocklist was found not running

Usage
Add direct link to list and press (Example: Level1, Level2, Level3)
Compressed lists should have .gz extention and follows PeerBlock syntax

Warning! - Apply after firewall change or state reset. Use at your own risk.

Current Status = NOT running
/tmp/rules.debug:87: cannot load "/usr/local/www/packages/ipblocklist/lists/ipfw.ipfw": No such file or directory
You are blocking 0 Networks/IPs

I uninstall, resintalled, uninstalled to no avail.

greengolftee87

@RonpfS:

Same problem here on 1.2.3 Release
Doesn't block anything
Doesn't uninstall correctly, IP BlockList still available in menu

got this in the log: Dec 5 14:05:45 root: IP-Blocklist was found not running
Usage
Add direct link to list and press (Example: Level1, Level2, Level3)
Compressed lists should have .gz extention and follows PeerBlock syntax

Warning! - Apply after firewall change or state reset. Use at your own risk.

Current Status = NOT running
/tmp/rules.debug:87: cannot load "/usr/local/www/packages/ipblocklist/lists/ipfw.ipfw": No such file or directory
You are blocking 0 Networks/IPs
I uninstall, resintalled, uninstalled to no avail.

Yeah I just checked mine too. Uninstall does nothing

tommyboy180

I will look into the uninstall problem tonight. As far as getting it running make sure your using direct links to lists. Try using one of the example lists.

greengolftee87

I tried all three lists on the configuration page to no avail.

tommyboy180

IP-Blocklist 3.0.1 released!

fixed uninstall problem.
updated perl to 5.12
updated netCIDR to 0.14

pfsense 1.2.3 has been tested.

pfsense 2.0BETA not tested.

Completely uninstall IP-Blocklist. If you still have a link for IP-Blocklist then run "rm -R /usr/local/www/packages/ipblocklist" and "rm /usr/local/etc/rc.d/IP-Blocklist.sh" before re-installing 3.0.1

greengolftee87

You are all kinds of awesome. Started working right away.
Thanks

tommyboy180

@greengolftee87:

You are all kinds of awesome. Started working right away.
Thanks

Glad to hear it!

RonpfS

So I rm the package rm -R /usr/local/www/packages/ipblocklist" and "rm /usr/local/etc/rc.d/IP-Blocklist.sh"
I reinstalled, doesn't block any .gz list

Removed, uninstallation went fine, the menu are not present in Firewall menu :)

Install again, still You are blocking 0 Networks/IPs

I modified /etc/inc/config.inc from 128MB to 256M and /usr/local/lib/php.ini from 32M to 128M
no change (not sure if I have to reboot or not)

Uninstall is my next move

tommyboy180

@RonpfS:

So I rm the package rm -R /usr/local/www/packages/ipblocklist" and "rm /usr/local/etc/rc.d/IP-Blocklist.sh"
I reinstalled, doesn't block any .gz list

Removed, uninstallation went fine, the menu are not present in Firewall menu :)

Install again, still You are blocking 0 Networks/IPs

I modified /etc/inc/config.inc from 128MB to 256M and /usr/local/lib/php.ini from 32M to 128M
no change (not sure if I have to reboot or not)

Uninstall is my next move

Uninstall the package from your package manager page and then re-install. That should do it. The rm -R command was only for those that still had a link after uninstalling and still had the package installed.

firestrife23

It seem to working perfectly, without any issues. However, how do I know it's actively blocking in real time, is there's a way to monitor this similar to logfile? I enabled Logging, and I don't see it under Status > System Logs

DigitalJer

hm, I seem to be failing at everything, lol.

Uninstall IP-Blocklist OK, but link remains.

Executed the CL as suggested above to remove the link, and the link remains (when clicked, 404 - Not Found). Reboot / reinstall / uninstall in any/every order doesn't seem to help, IP-Blocklist 3.0 keeps installing (instead of 3.0.1), and Running, but Blocking = 0 Networks.

tommyboy180

An old config is preventing you from getting the new version. I forget where the directory is but I think it somewhere near /usr/etc/pkgs or something like that. Just delete everything IP-Blocklist/ipblocklist.

I can't tell for sure since I'm away from home right now (working on my CCENT/CCNA). If you can't get it working let me know, I can probably get a VM of pfsense up if I need to.

firestrife23

just a small feature request, can you add this to bottom of whitelist page like "You're currently unblocking #### IPs"

DigitalJer

Found a cpl ipblockist.* in /usr/local/pkg -deleted them, same prob(s) still exist - no worries though, thanks for the tip :)

DWAyotte

@tommyboy180:

An old config is preventing you from getting the new version. I forget where the directory is but I think it somewhere near /usr/etc/pkgs or something like that. Just delete everything IP-Blocklist/ipblocklist.

I can't tell for sure since I'm away from home right now (working on my CCENT/CCNA). If you can't get it working let me know, I can probably get a VM of pfsense up if I need to.

Hey good buddy. I was on a wicked old version, like 2.2.1, something like that. I am having no luck getting the latest to work for me. I tried looking all over the fs, using your other awesome package btw, and couldn't find anything in terms of remnants from a past config.

The newest package installs fine, but when I add .gz lists I still have 0 showing for number of blocks with service Running. Any ideas? Thanks again!