Multi wan, routing one service through opt1
-
Hi there,
Im trying to route all my voip traffic through my opt1 interface, because the pbx is outside our normal network im using the siproxd service.
I did try to put this service on my opt1, but then the phones didnt work at all.
Any suggestions? -
If you have a rule that matches the traffic with a gateway set for the gateway of OPT1 (or a load balancer pool which prefers OPT1) it should work. However, you may need to try some of the usual VoIP tricks like manual outbound NAT with static port, etc.
http://doc.pfsense.org/index.php/VoIP_Configuration
-
Hi,
Just got it to work, added a static route for the pbx, changed the siproxd to use the opt1 interface for outbound traffic and changed the firewall rules so sip traffic is allowed :)
Pritty easy actually