Multi wan, routing one service through opt1
-
Hi there,
Im trying to route all my voip traffic through my opt1 interface, because the pbx is outside our normal network im using the siproxd service.
I did try to put this service on my opt1, but then the phones didnt work at all.
Any suggestions? -
If you have a rule that matches the traffic with a gateway set for the gateway of OPT1 (or a load balancer pool which prefers OPT1) it should work. However, you may need to try some of the usual VoIP tricks like manual outbound NAT with static port, etc.
http://doc.pfsense.org/index.php/VoIP_Configuration
-
Hi,
Just got it to work, added a static route for the pbx, changed the siproxd to use the opt1 interface for outbound traffic and changed the firewall rules so sip traffic is allowed :)
Pritty easy actually
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy