Country Block
-
Yup….NP the config was from an embedded alix board and did not work when imported to a full hardware install..........from what i am told its a "Known" issue. Your package is awesome and it does the Job 100%! thanks again. The folks here at Bluegrassnet appreciate it!
-
i wanted to say thanks for this package!!! its fantastic. This package is what got me introduced to pfsense since i needed something to block all of china and korea from my web servers. I have it added to cron to make sure it runs all the time as well.
I did have a question, is there any way to have this package to show up on the services screen?
I have that widget added to my main log in (dashboard) page on 2.0 and it would be good to see right there if it is running or not.
Just thought I would ask.
-
i wanted to say thanks for this package!!! its fantastic. This package is what got me introduced to pfsense since i needed something to block all of china and korea from my web servers. I have it added to cron to make sure it runs all the time as well.
I did have a question, is there any way to have this package to show up on the services screen?
I have that widget added to my main log in (dashboard) page on 2.0 and it would be good to see right there if it is running or not.
Just thought I would ask.
It's not really a service that is running to block the countries, so having this package show up in the services will not be possible. The way it works is by basically injecting a couple lines of deny rules to your fw config so being able to track the current status of the package will have to be done via other means. If you know php I would love the extra help!
There are still many changes to come and I haven't forgotten about that update deltaend!
I do appreciate the support, so thank you! -
I have a wierd problem. I selected 12 countries, all of spammers list + Barbados + Italy. Whenever I return to the list once saved, Barbados is never selected but it is being blocked.
Status says Currently 12 of 246 selected.Using Chrome. Anything i'm doing wrong or is it a bug?
-
Version 1.5 Released
Changes:
-
Added embedded compatibility.
-
Verified working with traffic shaping settings
-
Added interface choices - just for you jward!
-
Fixed bug with country Barbados - Thank you tci!
Warning: You need to select the interfaces that this will apply to before you run it. I Highly Recommend selecting all interfaces.
If you run into a problems let me know.
deltaend: I fixed the 404 problem and tested pfsense w/ traffic shaping. I was able to have it working w/ traffic shaping enabled so let me know if you run into any problems.Thank you all for your patience with updates.
-
-
Thanks Tommy, will take a look.
-
Aint this a wrong path for the new 0.1.5 edition of Country block??
/usr/local/etc/rc.d/countryblock.sh
I use this…
/usr/local/www/packages/countryblock/countryblock.sh
Thanks for all your help. :)
I did your suggestion with the uncheck Bogon and added the cron package and applied the command you specified. All seems to be working well with the Country Block package now. I rebooted my firewall and all came up ok. I did notice I could access some Chinese websites with extensions of .cn
Does the Country Block work for both IP's and DNS naming or just IP?
A On the cron job I made the new job entry with this criteria and maybe you have some suggestions or minor tweaks to it.
Cron Job:
Minute: 0
Hour: *
Mday: *
Month: *
Wday: *
Who: root
Command: /usr/local/etc/rc.d/countryblock.sh -
How does one update a package in pfSense? Is it automatic or do I need to do something?
-
Version 1.5 Released
Changes:
-
Added embedded compatibility.
-
Verified working with traffic shaping settings
-
Added interface choices - just for you jward!
-
Fixed bug with country Barbados - Thank you tci!
Warning: You need to select the interfaces that this will apply to before you run it. I Highly Recommend selecting all interfaces.
If you run into a problems let me know.
deltaend: I fixed the 404 problem and tested pfsense w/ traffic shaping. I was able to have it working w/ traffic shaping enabled so let me know if you run into any problems.Thank you all for your patience with updates.
Hmm. I updated and now it won't start. I do have a red error message stating "Warning! No Interfaces Selected Click" and yet when I click the box I get a 404 requesting a link to hxxp://xxx.xxx.xxx.xxx/packages/countryblock/countryblock_if.php which doesn't exist.. Is there a different page I go to select which interface? Like you recommended, I'm fine with all of them for now. I just checked the directory packages\countryblock and I do not see a countryblock_if.php file listed there.
Having an individual log just for this would be awesome though some day - no rush - volunteer work is always outstanding. Thanks dude - this package really has been well worth the pfsense experience.
-
-
+1 on the interface issue, does it still work without selecting one?
Thanks for the work tommyboy180
-
Supermule
- It's "/usr/local/etc/rc.d/countryblock.sh" "countryblock/countryblock.sh" does not exist. If you are making a cron job then use "/usr/local/etc/rc.d/countryblock.sh"
To update the package
-
Go to installed packages and uninstall countryblock
-
Now go to the main packages page and install countryblock
mgc6288
- uninstall countryblock completely and re-install
XIII
-
Thank you!
-
It does not work without selecting your interfaces, I will be pushing 1.6 tonight to tomorrow morning to address this
-
Version 1.6 is now available!
Changes:
-
All interfaces are selected/applied by default (no action required by users)
-
Modified Usage description to be more verbose
To upgrade uninstall countryblock and re-install.
-
-
Just an idea…..
Why not sort the countries in their respective part of the world instead?
Like Europe, North America, South America, Asia asf....The 7 continents. Thereby making it a lot easier to search and block.
-
Just an idea…..
Why not sort the countries in their respective part of the world instead?
Like Europe, North America, South America, Asia asf....The 7 continents. Thereby making it a lot easier to search and block.
Thank you for the suggestion! Alphabetically is the most efficient way to sort a huge list, it's sort of a defacto standardization that I think everyone has become accustomed to. It's also easier to maintain a large list like this in this order. I will note this for a future release.
Keep the suggestions coming! -
Hi Tommy,
I've got some ideas for the UI and process flow that might help - let me know if you're interested and I'll put some mock-up screens together.
Jon.
-
Hi Tommy,
I've got some ideas for the UI and process flow that might help - let me know if you're interested and I'll put some mock-up screens together.
Jon.
I am very interested, let's see what you have in mind.
-
mgc6288
- uninstall countryblock completely and re-install
That fixed it for me.
Thanks.
NV -
Version 1.6 is now available!
Changes:
-
All interfaces are selected/applied by default (no action required by users)
-
Modified Usage description to be more verbose
To upgrade uninstall countryblock and re-install.
thanks for the patience. Duh, I should have realized maybe uninstalling should have been done first. Works like a charm now.
-
-
Just an FYI. Since version 1.5 I have been having trouble with keeping Country Block running. I am running cron and have not made any changes to firewall rules. I uninstall the package numerous times and restarted the system. I can get CountryBlock to start ok, but it will only run for a few hours and then shut down. I have also uninstalled and reinstalled cron.
Is anybody else getting this? I noticed started happeing when I install 1.5 and now 1.6.
Thanks,
-
Not reporting anything of that kind :)