Country Block
-
Hey Tommy, I haven't written, I thought I'd take a rest for a week. But I'm back to try and resolve the issue below.
I'm still having problems whitelisting IPs. When I unblock a country, the people can gain access. But if I try whitelisting one IP for a country, they can't access anything. For instance, the IP 113.19.25.109 from India I put in as 113.19.25.109/32, but it didn't work. Am I doing something wrong?
Any ideas?
Are you sure that ip is responding. It doesn't respond to ICMP and port 80 for me. The best way to see if whitelisting is working is to ping that address (without CIDR) in the pfsense console. If it's not blocked then you will have normal behavior. If it is blocked then pfsense will say "operation not permitted".
Try that. -
I know that it's blocked, because when the country is blocked, so is the IP. The only way I can allow the IP to work is by unblocking country India. So when the country of India is blocked, the people using that Ip can't get in, even after I white-list it.
The only way I can allow them access is to not block the country India.
-
On my version of pfSense it never has done anything. As long as Couinty Block says it's active, it is. I know that it blocks the countries, I just haven't been able to set it up to whitelist certain IPs. In that respect, it doesn't work.
I mean, I can't start Country Block. Pressing "save/update" doesn't start CB.
And how can I solve this problem (I see it every first time I visit 'Country Block' section web-interface):
'/tmp/rules.debug:79: cannot load "/usr/local/www/packages/countryblock/lists/countries.txt": No such file or directory'Status of CB is always "not running".
Sorry for my english..
-
The only way I can allow them access is to not block the country India.
Yes the list is not perfect - I just had a case where a German IP got blocked, had to allow European Union to let it access. Reverse IP Check clearly said it's a German IP. Works for me but shows that the lists may have some errors (blocks moving I guess).
-
Anyone having issues when saving/committing countries? I had a write error and I was able to login to the shell and run 'mount -u -w /' to get country block to save the settings.
-
@Spy:
Anyone having issues when saving/committing countries? I had a write error and I was able to login to the shell and run 'mount -u -w /' to get country block to save the settings.
Are you using embedded?
-
yeah, but it always worked fine until now.
-
Should be good!
-
CIDR.php wont load this evening so the install fails for me…
Ill try again later.
-
CIDR.php wont load this evening so the install fails for me…
Ill try again later.
Thank you. I'm having issue with the host. Pfsense does not host binary files anymore so it must be hosted somewhere.
Check back in 2 hours. -
Thanks Tom! Working now. :)
-
Tom, you can just send me or Jim P. binaries and we'll get them uploaded.
-
@cmb:
Tom, you can just send me or Jim P. binaries and we'll get them uploaded.
Awesome!
I update the binary every so often. I hope that won't be an issue. -
I'm having problems getting Country Block to run. I keep getting the error Current Status = NOT running
/tmp/rules.debug:102: cannot load "/usr/local/www/packages/ipblocklist/lists/ipfw.ipfw": No such file or directory
You are blocking 0 Networks.PfSense 2.0-RC3 (i386)
built on Thu Jul 7 22:58:43 EDT 2011.One country selected and I tried the suggested workarounds (edited a single rule without changing it, saving, etc.). I also rebooted the firewall box…
-
I had a simalure issue. I did a simple reinstall of the package and everything worked from that point forward. Also did this issue start after a firmware update? I always have to reinstall Country Block after a firmware update.
-
it was the only package i installed after upgrading to 2.0. i did try reinstalling the package but get the same error.
-
Awesome!
I update the binary every so often. I hope that won't be an issue.No problem.
-
There were a couple of Times I had to uninstall the package, reboot, and then reinstall.
-
http://forum.pfsense.org/index.php/topic,25732.msg173839.html#msg173839
I have a similar problem. I have done a fresh install of 2.0 rc3 and installed country block. On the country block page it says that it is running and blocking networks and when I run /usr/local/etc/rc.d/countryblock.sh from the shell it says that it is running. I tried to ping some ips in the blocked ranges and it is definitely working. But in the syslog it says that it is not running.
root: Countryblock was found not running
-
I keep getting this whether countryblock is installed or not on one of my firewalls… and whether or not its running...
php: : The command '/usr/local/pkg/pf/countryblock.sh start' returned exit code '2', the output was 'not running root: Countryblock was found not running Status: 404 Not Found Content-type: text/html No input file specified. 0 table deleted. 87 18 rm: /tmp/rules.debug.tmp: No such file or directory rm: /tmp/rules.debug.tmp: No such file or directory 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 cat: /usr/local/www/packages/countryblock/interfaces.txt: No such file or directory 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 /usr/local/pkg/pf/countryblock.sh: cannot create /usr/loc
Looks like something left behind from an earlier install… Any clue how to fix it?? :)
