Keep loosing WAN IP Address - dhclient does not seem to do update
-
Yes, it has been rebooted once.
-
Mine has been steady for the last 2 days as well.
-
I also get the dhcp problem only one time after each boot.
I have also been losing functionality of the DNS forwarder since upgrading to 1.0.2-0221 from 1.0.1 but that seems to have vanished since I started out with a fresh config. -
as i said, happens one time after reboot, then press renew and the issue disappears,
there is something magic about the renew button that doesn´t happen in the reboot process =) -
I have rebooted countless times and cannot reproduce this. Sorry.
-
I don't think I am affected by that bug, It's much worse for me :(
After about 12h uptime (this time) the interface went down, when i renewed the ip adress nothing worked correctly, I could not do nslookup. Didnt try anything else. I restarted the DNS forwarder, it made no difference. I'm not sure about this but my hardware could be very incompatible with pfsense 1.0.2/fbsd 5.2.Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99Just wanted to say this, I don't have time to look further into this at the moment.
EDIT: SNAPSHOT-02-27-2007 solved my problems
-
I don't think I am affected by that bug, It's much worse for me :(
After about 12h uptime (this time) the ip adress went down, when i renewed it nothing worked correctly, I could not do nslookup. Didnt try anything else. I restarted the DNS forwarder, it made no difference. I'm not sure about this but my hardware could be very incompatible with pfsense 1.0.2/fbsd 5.2.Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99This is not the same problem. Please start a new thread. And for the record, we do not use FreeBSD 5.2.
-
Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99Any possibility that you try to run PPPoE along with Multiwan like in the following thread?
http://forum.pfsense.org/index.php/topic,3554.0.htmlIf this is true please add your comments to this thread. If not please start a new one like Scott asked you to do.
-
i don´t know what you guys are using when you are testing the dhclient, but issue still exists:
Mar 1 17:38:47 dhclient[322]: exiting.
Mar 1 17:38:47 dhclient[322]: exiting.
Mar 1 17:38:47 dhclient[322]: short write: wanted 21 got 0 bytes
Mar 1 17:38:47 dhclient[322]: short write: wanted 21 got 0 bytes
Mar 1 17:38:47 dhclient[322]: DHCPACK from 90.224.168.1
Mar 1 17:38:47 dhclient[322]: DHCPREQUEST on rl0 to 255.255.255.255 port 67
Mar 1 17:36:26 last message repeated 3 times
Mar 1 17:32:37 last message repeated 6 times
Mar 1 17:30:36 last message repeated 3 times -
We lowered the lease time to 150 and used a dedicated testing box.
At this point we cannot reproduce the error. Reinstall.
-
i have done so 2 times already =)
-
Well sorry, 4 developers where able to reproduce it prior but under no conditions does it break now.
I don't know what to tell you at this point.
-
oh well, i just lay low for a while, and see if others having problems too,
thanks for all your hard work !
-
1.0.1-SNAPSHOT-02-21-2007
Uptime 3 days, 16:21
Still running :)
-
1.0.1-SNAPSHOT-02-21-2007
Uptime 3 days, 16:21
Still running :)
Great! Please continue to let us know the progress. We really think its nailed.
-
-
It seems to be working just fine now, thanks!
-
I've done a clean install with the latest official update from 08/03/2007 but my logs registeres the following rc.linkup message:
Last 50 system log entries
Mar 9 18:13:30 php: : Incorrect number of arguments passed rc.linkup…exiting.
Mar 9 18:13:30 php: : Arguments passed rc.linkup. ''
Mar 9 18:13:28 check_reload_status: rc.linkup starting
Mar 9 18:13:23 php: : phpDynDNS: No Change In My IP Address and/or 25 Days Has Not Past. Not Updating Dynamic DNS Entry.It's normal ?
[]'s
-
Yes, those are debugging statements and looks fine.
-
1.0.1-SNAPSHOT-02-27-2007
Uptime 7 days, 16:51Still running, updating to pfSense-Full-Update-1.0.1-SNAPSHOT-03-08-2007