CARP + Multi-WAN + RIPv2
is RIPv2 function well on 1.2.3?
when i enable RIPv2, the following error pop-up in the system log with all my carp interface:
routed: possible netmask problem between carp10:192.168.1.201/32 and vlan0:192.168.1.0/24
i have double checked my carp interface's subnet is 24 instead of 32, but it prompt for such error.
my carp10 have virtual ip 192.168.1.201/24, but routed warn with subnet 32.
pfsense can receive rip data from my other device (an TZ170), bu that device cannot receive pfsense's rip data.
32 means just 1 IP. 24 means the whole subnet. Try breaking apart your subnet and use individual definitions.