SWISSCOM TV configuration

[svabi]

Swisscom TV works with following configuration:

take this config as a starting point for your own needs, specially take a look at the firewall rules.

tested with pfsense 2.0-beta 4, August 1 build

 <igmpproxy><igmpentry><ifname>lan</ifname>
			<threshold>1</threshold>
			<type>downstream</type>

<address>192.168.1.0/24</address></igmpentry> 
		 <igmpentry><ifname>wan</ifname>
			<threshold>1</threshold>
			<type>upstream</type>

<address>224.0.0.0/4 195.186.0.0/16 1.1.1.0/24</address></igmpentry></igmpproxy> 

 <rule><id><type>pass</type>
			<interface>lan</interface>
			 <allowopts><max><max-src-nodes><max-src-conn><max-src-states><statetimeout><statetype>keep state</statetype>
			 <os><protocol>igmp</protocol>
			<source>
				 <any><destination><any></any></destination></any></os></statetimeout></max-src-states></max-src-conn></max-src-nodes></max></allowopts></id></rule> 
		 <rule><id><type>pass</type>
			<interface>lan</interface>
			 <allowopts><max><max-src-nodes><max-src-conn><max-src-states><statetimeout><statetype>keep state</statetype>
			 <os><protocol>udp</protocol>
			<source>
				 <any><destination><any></any></destination></any></os></statetimeout></max-src-states></max-src-conn></max-src-nodes></max></allowopts></id></rule> 

		 <rule><id><type>pass</type>
			<interface>wan</interface>
			 <allowopts><max><max-src-nodes><max-src-conn><max-src-states><statetimeout><statetype>keep state</statetype>
			 <os><protocol>igmp</protocol>
			<source>
				 <any><destination><any></any></destination></any></os></statetimeout></max-src-states></max-src-conn></max-src-nodes></max></allowopts></id></rule> 
		 <rule><id><type>pass</type>
			<interface>wan</interface>
			 <allowopts><max><max-src-nodes><max-src-conn><max-src-states><statetimeout><statetype>keep state</statetype>
			 <os><protocol>udp</protocol>
			<source>
				 <any><destination><any></any></destination></any></os></statetimeout></max-src-states></max-src-conn></max-src-nodes></max></allowopts></id></rule> 

regards,

jan


[xbipin]

can any1 confirm if the above works for other providers and no config change is required with recent snaps to make it work.

[xbipin]

i have the below in my config and systemlog shows the below and i have no clue if igmp proxy is working or no.