2 Subnets on one side of tunnel

[jmcentire]

Site A has 2 subnets, Site B has 1 subnet, Site B needs to talk to both subnets at site A(and vise versa).

I setup two IPSEC tunnels:

Tunnel 1: Site A Sub 1 <-> Site B
Tunnel 2: Site A Sub 2 <-> Site B

The tunnels initially worked, but after a few hours both disconnected and would not get past phase 1.  As soon as I disabled tunnel 2 on both sides, tunnel 1 came up immediately.  I can then enable tunnel 2 again and it will come up, but in a few hours both would disconnect again.  Right now the 2 tunnels are exactly the same except for the PSKs and the site A subnet.  Am I missing something?

Thanks!

[jimp]

you can try to use the same PSK, too.

Or bite the bullet and make a backup, then try a 2.0 beta and then you can use multiple subnets per tunnel. :)

[jmcentire]

Right after I posted yesterday I thought I would try using the same PSKs, so far they have both stayed up for about 18 hours, so it is looking like that fixed it. Thanks!