PT 1000 Dual Intel with no ALTQ?
-
I have a PT 1000 Dual Gigabit Intel card that is setup as
igb0-> Lan
igb1-> WanTrying to enable traffic shaping but it keeps telling me ALTQ is not supported with my hardware. Yet my hardware says its supported with IGB drivers.
Running PFsense 1.2.3 with 2 GB ram.
Please advise. Thanks
-
Edit /etc/inc/globals.inc and add igb to the altq list. :-)
That didn't make it into 1.2.3.
-
Awesome!
It was actually "/etc/inc/interfaces.inc" but you pointed me in the correct direction.
Thanks that worked great.
Always nice to have a good friendly "staff"
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.