Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Speed issues (adsl2+ home install)

    Scheduled Pinned Locked Moved General pfSense Questions
    3 Posts 2 Posters 1.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K
      Keljian
      last edited by

      Hiya all.

      I'm having some speed issues with my pfsense box.

      Hardware is a d210GLY intel board, with a gig of ram, and an intel pro 1000mt card.

      pretty simple, plenty of power (1.3ghz celeron -m)

      I run a draytek 2700 adsl modem in bridged mode. PPPoE is enabled with login and password on the pfsense box.

      I have not set up any non "default" rules in the firewall, and it doesn't seem to matter if squid/traffic shaper are on or not. nmap squid and snort are installed.

      The modem sync is about 11.5mbit, the pfsense box is routing at about 5-6mbit.
      When connected directly to the airport extreme I get line speed (11~ mbit)

      Kinda strange cause I have had 11mbit through pfsense once before.

      Any help would be appreciated.

      1 Reply Last reply Reply Quote 0
      • W
        wallabybob
        last edited by

        Some more details would help.

        @Keljian:

        the pfsense box is routing at about 5-6mbit.

        Measured where? Doing what?

        @Keljian:

        When connected directly to the airport extreme I get line speed (11~ mbit)

        First mention of the airport. When what is directly connected to the airport? The airport is connected to what? And what is the airport extreme? (If I had to guess I'd say I suspect its an Apple sourced Wifi Access Point and LAN switch but it seems a fairly generic name so I'm not clear about its purpose.)

        Some simple diagrams would help clarify the configurations you are comparing.

        1 Reply Last reply Reply Quote 0
        • K
          Keljian
          last edited by

          @wallabybob:

          Some more details would help.

          @Keljian:

          the pfsense box is routing at about 5-6mbit.

          Measured where? Doing what?

          @Keljian:

          When connected directly to the airport extreme I get line speed (11~ mbit)

          First mention of the airport. When what is directly connected to the airport? The airport is connected to what? And what is the airport extreme? (If I had to guess I'd say I suspect its an Apple sourced Wifi Access Point and LAN switch but it seems a fairly generic name so I'm not clear about its purpose.)

          Some simple diagrams would help clarify the configurations you are comparing.

          Ok

          draytek 2700 -> pfsense box (pppoe client)-> (recent) apple airport extreme -> (wireless) macbook pro  = 6mbit down from speedtest.net and max of 500KB/s download from akami (in australia)
          vs
          draytek 2700 -> apple airport extreme (pppoe client) -> macbook pro  = 11mbit down from above sources

          Airport is:
          http://www.apple.com/airportextreme/

          apple airport extreme is a 4 port gigabit switch/router with 2 channel wireless n

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.