Lot's of WAN downs since my latest daily update



  • It could be brighthouse/timewarner, but as I do daily updates, is it just me or is anyone else see this in the logs.

    2.0-BETA4 (i386) built on Sun Aug 15 10:26:54 EDT 2010 FreeBSD 8.1-RELEASE

    Last update at  "Aug 15 20:01:03 syslogd: kernel boot file is /boot/kernel/kernel"

    Aug 15 22:49:11 check_reload_status: reloading filter
    Aug 15 22:49:01 apinger: alarm canceled: GW_WAN(72.187.40.1) *** delay ***
    Aug 15 22:48:52 apinger: ALARM: GW_WAN(72.187.40.1) *** delay ***
    Aug 15 22:15:43 syslogd: kernel boot file is /boot/kernel/kernel
    Aug 15 22:15:43 syslogd: exiting on signal 15
    Aug 15 22:11:52 check_reload_status: syncing firewall
    Aug 15 22:11:51 syslogd: kernel boot file is /boot/kernel/kernel
    Aug 15 22:11:51 syslogd: exiting on signal 15
    Aug 15 22:11:21 check_reload_status: syncing firewall
    Aug 15 22:11:06 check_reload_status: reloading filter
    Aug 15 22:10:59 syslogd: kernel boot file is /boot/kernel/kernel
    Aug 15 22:10:59 syslogd: exiting on signal 15
    Aug 15 22:10:20 check_reload_status: syncing firewall
    Aug 15 22:10:14 check_reload_status: reloading filter
    Aug 15 22:10:10 syslogd: kernel boot file is /boot/kernel/kernel
    Aug 15 22:10:10 syslogd: exiting on signal 15
    Aug 15 20:59:36 dnsmasq[26352]: using nameserver 65.32.5.111#53
    Aug 15 20:59:36 dnsmasq[26352]: using nameserver 65.32.5.112#53
    Aug 15 20:59:36 dnsmasq[26352]: reading /etc/resolv.conf
    Aug 15 20:59:29 php: : rc.newwanip: on (IP address: 72.187.41.237) (interface: wan) (real interface: vr1).
    Aug 15 20:59:29 php: : rc.newwanip: Informational is starting vr1.
    Aug 15 20:59:28 check_reload_status: rc.newwanip starting
    Aug 15 20:59:21 dhclient[27439]: bound to 72.187.41.237 – renewal in 23755 seconds.
    Aug 15 20:59:21 dhclient: Creating resolv.conf
    Aug 15 20:59:21 dhclient: /sbin/route add default 72.187.40.1
    Aug 15 20:59:21 dhclient: Adding new routes to interface: vr1
    Aug 15 20:59:21 dhclient: New Routers (vr1): 72.187.40.1
    Aug 15 20:59:21 dhclient: New Broadcast Address (vr1): 255.255.255.255
    Aug 15 20:59:21 dhclient: New Subnet Mask (vr1): 255.255.248.0
    Aug 15 20:59:21 dhclient: New IP Address (vr1): 72.187.41.237
    Aug 15 20:59:21 dhclient: ifconfig vr1 inet 72.187.41.237 netmask 255.255.248.0 broadcast 255.255.255.255
    Aug 15 20:59:21 dhclient: Starting add_new_address()
    Aug 15 20:59:21 dhclient: REBOOT
    Aug 15 20:59:21 dhclient[27439]: DHCPACK from 10.222.176.1
    Aug 15 20:59:21 dhclient[27439]: DHCPREQUEST on vr1 to 255.255.255.255 port 67
    Aug 15 20:59:21 dhclient: PREINIT
    Aug 15 20:59:19 dhclient[61920]: exiting.
    Aug 15 20:59:19 dhclient[61920]: exiting.
    Aug 15 20:59:19 dhclient[61920]: connection closed
    Aug 15 20:59:19 dhclient[61920]: connection closed
    Aug 15 20:59:19 dhclient: FAIL
    Aug 15 20:59:19 dhclient[4671]: My address (72.187.41.237) was deleted, dhclient exiting
    Aug 15 20:59:19 dhclient[4671]: My address (72.187.41.237) was deleted, dhclient exiting
    Aug 15 20:59:19 php: : HOTPLUG: Configuring interface wan
    Aug 15 20:59:19 php: : DEVD Ethernet attached event for wan
    Aug 15 20:59:19 check_reload_status: rc.linkup starting
    Aug 15 20:59:16 check_reload_status: reloading filter
    Aug 15 20:59:00 apinger: alarm canceled: GW_WAN(72.187.40.1) *** down ***

    Aug 15 20:58:24 check_reload_status: reloading filter
    Aug 15 20:58:05 apinger: ALARM: GW_WAN(72.187.40.1) *** down ***

    Aug 15 20:27:45 check_reload_status: rc.linkup starting
    Aug 15 20:27:33 apinger: alarm canceled: GW_WAN(72.187.40.1) *** down ***

    Aug 15 20:26:57 check_reload_status: reloading filter
    Aug 15 20:26:38 apinger: ALARM: GW_WAN(72.187.40.1) *** down ***



  • I'm experiencing a similar issue after installing the upgrade today…
    and by looking at the System Logs: Firewall the Source and Destinations are all backwards

    For example when I try to access a web site, the LAN IP shows under Destination and the Destination IP shows under Source.


Log in to reply