Need driver for Realtek RTL8103E chip
-
Hi,
i have a new board with a Realtek RTL8103E networking chip.
pfsense says something like this:kernel: re0: <realtek 10="" 8101e="" 8102e="" 8102el="" pcie="" 100basetx="">port 0xec00-0xecff mem 0xfebff000-0xfebfffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci3
kernel: re0: Using 1 MSI messages
kernel: re0: Chip rev. 0x34800000
kernel: re0: MAC rev. 0x00400000
kernel: re0: Unknown H/W revision: 0x34c00000
kernel: device_attach: re0 attach returned 6FreeBSD 8.1 supports this chip.
Is there a driver around for this hardware? How can I get it working?
Sincerely,
Friedemann</realtek>
-
There's a good chance that support for this device will be in 2.0. Try running one of the latest beta snaps and make sure this is the case.
-
Hi,
i tried to install the latest 2.0 iso, but it hangs with
cd0: cd present [51717 x 2048 byte records]
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 ca 4 0 0 1 0
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,33,21,80 asc:64,0 (Illegal mode for this track)
(cd0:umass-sim0:0:0:0): cddone: got error 0x6 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 ca 4 0 0 1 0
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,33,21,80 asc:64,0 (Illegal mode for this track)
(cd0:umass-sim0:0:0:0): cddone: got error 0x6 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 ca 4 0 0 1 0
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST csi:28,33,21,80 asc:64,0 (Illegal mode for this track)
(cd0:umass-sim0:0:0:0): cddone: got error 0x6 backAny ideas?
Best,
Friedemann -
Hi,
the latest snapshot works now. I just had to ignore the cd errors.
Realtek card is recognized correctly.
Thanks for the help!
Best,
Friedemann -
…
(cd0:umass-sim0:0:0:0): cddone: got error 0x6 backHi,
I have the same problem. Would you be so kind to explain me how to ignore the cd errors?
Thanks for the help! -
Hi,
i was just waiting and doing nothing. The install continued then.
No idea why.
Best,
Friedemann