NAT opt2(wifi-ap) to LAN for http, ftp, rdp, smb, etc
i have this pfsense setup :
i want to access from opt2 some services (http, smb, prt, rdp, ftp, etc) from lan server.
i tried many combinations with rules, nat, outbound nat.
i dont use any vlan or vip.
GruensFroeschli last edited by
The subnet on your OPT2 is not a private subnet.
You dont need any NAT. Just create a firewall rule on the OPT2 interface similar to the default rule on the LAN interface.