Console redirection on com2
-
Is there another solution then downloading the developers edition, altering the kernel config and rebuilding a custom image to enable console redirection to com2 instead of com1? Our new firewalls have a useless lcd on com1 and a fixed com2, so no solution by changing the cables.
If I assume no, how hard/automated is the developers edition? I build custom freebsd installations for some years now.
F.i. if version 1.0.2 hits the street and I download the latest developers edition, will I be able to build 100% the same as you can find on the download section (full, cf…)?thx
Günther
-
Anyone? At least give me some info about the dev edition, I'm not afraid to use it, but as always I'm short on time.
-
You open the box up?? Maybe the lcd is plugged into the board by a ribbon cable. If so older machines had ribbon cable connector to serial port. You can grab one of those off ebay and slap in it there.
-
It's an appliance with everything fixed. I can unplug the lcd, but there's nothing there to screw the serial break out thing. Off course you can adapt everything with a drill, but those appliances were a bit to expensive for that :)
-
Can you reassign ressources in the bios to swap the com interfaces?
-
I can assign console redirection, but swapping com1/2 isn't possible. Too bad you have to recompile the kernel for this…