Installation Problems



  • Hi all,

    i want to install PFsense on a Harddisk.

    When i create the partitions, i got following errors:

    BSD Installer started
    [Mon Nov 27 20:01:15 2006]
    DFUI connection on tcp:9999 successfully established
    ,- opened pty to '/sbin/sysctl -n hw.physmem'
    < 796286976
    `- closed pty to '/sbin/sysctl -n hw.physmem'
    `/sbin/sysctl -n hw.physmem` returned: 796286976
    ,- opened pty 
    to '/sbin/sysctl -n kern.disks'
    < ad0
    `- closed pty to '/sbin/sysctl -n kern.disks'
    `/sbin/sysctl -n kern.disks` returned: ad0
    Testing ad0
    Invoking survey for ad0
    Surveying Disk: ad0 ...
    ,- opened pty to '/sbin/atacontrol list'
    [Mon Nov 27 20:01:16 2006]
    < ATA channel 0:
    <     Master:  ad0 <ic25n040atmr04-0 mo2oad4a="">ATA/ATAPI revision 6
    <     Slave:       no device present
    < ATA channel 1:
    <     Master:      no device present
    <     Slave:  acd0 <lite-on dvd="" sohd-167t="" 9s19="">ATA/ATAPI revision 5
    ( EOF )
    `- closed pty to '/sbin/atacontrol list'
    ,- opened pty to '/sbin/fdisk ad0'
    < ******* Working on device /dev/ad0 *******
    < parameters extracted from in-core disklabel are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Figures below won't work with BIOS for partitions not in cyl 1
    < parameters to be used for BIOS calculations are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Media sector size is 512
    < Warning: BIOS sector numbering starts with sector 1
    < Information from DOS bootblock is:
    < The data for partition 1 is:
    < sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    <     start 255, size 78139905 (38154 Meg), flag 80 (active)
    <   beg: cyl 0/ head 1/ sector 1;
    <   end: cyl 719/ head 15/ sector 63
    < The data for partition 2 is:
    < <unused>< The data for partition 3 is:
    < <unused>< The data for partition 4 is:
    < <unused>( EOF )
    `- closed pty to '/sbin/fdisk ad0'
    Disk ad0 (ad0: 38154MB <ic25n040atmr04 0="" mo2oad4a="">at ata0-master UDMA100): 37.26G: 19152/16/255
    ,- opened pty to '/sbin/fdisk -s ad0'
    < /dev/ad0: 19152 cyl 16 hd 255 sec
    < Part        Start        Size Type Flags
    <    1:         255    78139905 0xa5 0x80
    ( EOF )
    `- closed pty to '/sbin/fdisk -s ad0'
    Surveying Partition: 1: 255,78139905:165/true
    ,- opened pty to '/sbin/bsdlabel ad0s1s1'
    < bsdlabel: /dev/ad0s1s1: No such file or directory
    ( EOF )
    `- closed pty to '/sbin/bsdlabel ad0s1s1'
    ,- opened pty to '/sbin/ifconfig -l'
    < xl0 fxp0 lo0 pfsync0 pflog0
    `- closed pty to '/sbin/ifconfig -l'
    ,- opened pty to '/sbin/ifconfig xl0'
    < xl0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
    <   options=9 <rxcsum,vlan_mtu><   inet6 fe80::210:4bff:fe06:c7fb%xl0 prefixlen 64 scopeid 0x1
    <   ether 00:10:4b:06:c7:fb
    <   media: Ethernet autoselect (none)
    <   status: no carrier
    ( EOF )
    `- closed pty to '/sbin/ifconfig xl0'
    ,- opened pty to '/sbin/ifconfig fxp0'
    < fxp0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
    <   options=8 <vlan_mtu><   inet6 fe80::204:acff:fee6:c514%fxp0 prefixlen 64 scopeid 0x2
    <   inet 172.16.6.44 netmask 0xffffff00 broadcast 172.16.6.255
    <   ether 00:04:ac:e6:c5:14
    <   media: Ethernet autoselect (100baseTX <full-duplex>)
    <   status: active
    ( EOF )
    `- closed pty to '/sbin/ifconfig fxp0'
    ,- opened pty to '/sbin/ifconfig lo0'
    < lo0: flags=8049 <up,loopback,running,multicast>mtu 16384
    <   inet6 ::1 prefixlen 128
    <   inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
    <   inet 127.0.0.1 netmask 0xffffff00
    ( EOF )
    `- closed pty to '/sbin/ifconfig lo0'
    ,- opened pty to '/sbin/ifconfig pfsync0'
    < pfsync0: flags=41 <up,running>mtu 2020
    <   pfsync: syncdev: lo0 maxupd: 128
    ( EOF )
    `- closed pty to '/sbin/ifconfig pfsync0'
    ,- opened pty to '/sbin/ifconfig pflog0'
    < pflog0: flags=100 <promisc>mtu 33208
    ( EOF )
    `- closed pty to '/sbin/ifconfig pflog0'
    '/usr/local/share/dfuibe_lua/pit//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua/pit//..' skipped, it is a directory
    UINav.Atom 'pre_install_tasks/welcome' was configured as 'ignore'
    couldn't register UINav atom from file '050_welcome.lua'
    '100_select_language.lua' skipped, reason: nil
    registered UINav atom 'pre_install_tasks/configure_console'
    UINav.Atom 'pre_install_tasks/load_kernel_modules' was configured as 'ignore'
    couldn't register UINav atom from file '400_load_kernel_modules.lua'
    registered UINav atom 'pre_install_tasks/configure_network'
    'main.lua' skipped, it is the currently executing script
    Flow executing -> pre_install_tasks/configure_console (Configure Console)
    [Mon Nov 27 20:01:20 2006]
    Flow executing -> pre_install_tasks/configure_network (Configure your Network)
    '/usr/local/share/dfuibe_lua//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//..' skipped, it is a directory
    registered UINav atom 'main/install_os'
    UINav.Atom 'main/configure_installed_system' was configured as 'ignore'
    couldn't register UINav atom from file '400_configure.lua'
    UINav.Atom 'main/upgrade_installed_system' was configured as 'ignore'
    couldn't register UINav atom from file '600_upgrade.lua'
    UINav.Atom 'main/set_up_netboot' was configured as 'ignore'
    couldn't register UINav atom from file '800_netboot.lua'
    registered UINav atom 'main/reboot'
    '/usr/local/share/dfuibe_lua//conf' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//configure' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//install' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//lib' skipped, it is a directory
    'main.lua' skipped, it is the currently executing script
    '/usr/local/share/dfuibe_lua//netboot' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//pit' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//upgrade' skipped, it is a directory
    [Mon Nov 27 20:01:21 2006]
    Menu.Item Selected -> main/install_os (Install pfSense)
    '/usr/local/share/dfuibe_lua/install//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua/install//..' skipped, it is a directory
    UINav.Atom 'main/install/welcome' was configured as 'ignore'
    couldn't register UINav atom from file '100_welcome.lua'
    registered UINav atom 'main/install/select_disk'
    registered UINav atom 'main/install/format_disk'
    registered UINav atom 'main/install/partition_disk'
    registered UINav atom 'main/install/install_bootblocks'
    registered UINav atom 'main/install/select_part'
    registered UINav atom 'main/install/select_subparts'
    UINav.Atom 'main/install/warn_omitted_subpartitions' was configured as 'ignore'
    couldn't register UINav atom from file '405_warn_omitted_subparts.lua'
    registered UINav atom 'main/install/create_subparts'
    UINav.Atom 'main/install/select_additional_filesystems' was configured as 'ignore'
    couldn't register UINav atom from file '410_select_additional_filesystems.lua'
    registered UINav atom 'main/install/preselect_packages'
    UINav.Atom 'main/install/select_packages' was configured as 'ignore'
    couldn't register UINav atom from file '450_select_packages.lua'
    UINav.Atom 'main/install/confirm_install_os' was configured as 'ignore'
    couldn't register UINav atom from file '490_confirm_install_os.lua'
    registered UINav atom 'main/install/install_os'
    registered UINav atom 'main/install/pfsense_after_install'
    UINav.Atom 'main/install/finished' was configured as 'ignore'
    couldn't register UINav atom from file '800_finished.lua'
    registered UINav atom 'main/install/reboot'
    'main.lua' skipped, it is the currently executing script
    Flow executing -> main/install/select_disk (Select Disk)
    [Mon Nov 27 20:01:22 2006]
    Flow executing -> main/install/format_disk (Format Disk)
    [Mon Nov 27 20:01:26 2006]
    ,-<<< Executing `/sbin/fdisk -I ad0'
    | ******* Working on device /dev/ad0 *******
    [Mon Nov 27 20:01:27 2006]
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'g c4864 h255 s63' >/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 1 165 63 78140097' >>/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 2 0 0 0' >>/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 3 0 0 0' >>/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 4 0 0 0' >>/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'a 1' >>/tmp/format.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/cat /tmp/format.fdisk'
    | g c4864 h255 s63
    | p 1 165 63 78140097
    | p 2 0 0 0
    | p 3 0 0 0
    | p 4 0 0 0
    | a 1
    `->>> Exit status: 0
    ,-<<< Executing `/sbin/fdisk -v -f /tmp/format.fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | fdisk: WARNING line 1: number of cylinders (4864) may be out-of-range
    |     (must be within 1-1024 for normal BIOS operation, unless the entire disk
    |     is dedicated to FreeBSD)
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=4864 heads=255 sectors/track=63 (16065 blks/cyl)
    |
    | Information from DOS bootblock is:
    | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |     start 63, size 78140097 (38154 Meg), flag 80 (active)
    |   beg: cyl 0/ head 1/ sector 1;
    |   end: cyl 767/ head 254/ sector 63
    | 2: <unused>| 3: <unused>| 4: <unused>`->>> Exit status: 0
    ,-<<< Executing `/sbin/fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Media sector size is 512
    | Warning: BIOS sector numbering starts with sector 1
    | Information from DOS bootblock is:
    | The data for partition 1 is:
    | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |     start 63, size 78140097 (38154 Meg), flag 80 (active)
    |   beg: cyl 0/ head 1/ sector 1;
    |   end: cyl 767/ head 254/ sector 63
    | The data for partition 2 is:
    | <unused>| The data for partition 3 is:
    | <unused>| The data for partition 4 is:
    | <unused>`->>> Exit status: 0
    ,-<<< Executing `/usr/bin/yes | /sbin/fdisk -B ad0'
    | ******* Working on device /dev/ad0 *******
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Media sector size is 512
    | Warning: BIOS sector numbering starts with sector 1
    | Information from DOS bootblock is:
    | The data for partition 1 is:
    | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |     start 63, size 78140097 (38154 Meg), flag 80 (active)
    |   beg: cyl 0/ head 1/ sector 1;
    |   end: cyl 767/ head 254/ sector 63
    | The data for partition 2 is:
    | <unused>| The data for partition 3 is:
    | <unused>| The data for partition 4 is:
    | <unused>| Do you want to change the boot code? [n]
    | We haven't changed the partition table yet.  This is your last chance.
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Information from DOS bootblock is:
    | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |     start 63, size 78140097 (38154 Meg), flag 80 (active)
    |   beg: cyl 0/ head 1/ sector 1;
    |   end: cyl 767/ head 254/ sector 63
    | 2: <unused>| 3: <unused>| 4: <unused>| Should we write new partition table? [n] yes: stdout: Broken pipe
    `->>> Exit status: 0
    ,- opened pty to '/sbin/sysctl -n hw.physmem'
    < 796286976
    `- closed pty to '/sbin/sysctl -n hw.physmem'
    `/sbin/sysctl -n hw.physmem` returned: 796286976
    ,- opened pty to '/sbin/sysctl -n kern.disks'
    < ad0
    `- closed pty to '/sbin/sysctl -n kern.disks'
    `/sbin/sysctl -n kern.disks` returned: ad0
    Testing ad0
    Invoking survey for ad0
    Surveying Disk: ad0 ...
    ,- opened pty to '/sbin/atacontrol list'
    < ATA channel 0:
    <     Master:  ad0 <ic25n040atmr04-0 mo2oad4a="">ATA/ATAPI revision 6
    <     Slave:       no device present
    < ATA channel 1:
    <     Master:      no device present
    <     Slave:  acd0 <lite-on dvd="" sohd-167t="" 9s19="">ATA/ATAPI revision 5
    ( EOF )
    `- closed pty to '/sbin/atacontrol list'
    ,- opened pty to '/sbin/fdisk ad0'
    < ******* Working on device /dev/ad0 *******
    < parameters extracted from in-core disklabel are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Figures below won't work with BIOS for partitions not in cyl 1
    < parameters to be used for BIOS calculations are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Media sector size is 512
    < Warning: BIOS sector numbering starts with sector 1
    < Information from DOS bootblock is:
    < The data for partition 1 is:
    < sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    <     start 63, size 78140097 (38154 Meg), flag 80 (active)
    <   beg: cyl 0/ head 1/ sector 1;
    <   end: cyl 767/ head 254/ sector 63
    < The data for partition 2 is:
    < <unused>< The data for partition 3 is:
    < <unused>< The data for partition 4 is:
    < <unused>( EOF )
    `- closed pty to '/sbin/fdisk ad0'
    Disk ad0 (ad0: 38154MB <ic25n040atmr04 0="" mo2oad4a="">at ata0-master UDMA100): 37.26G: 19152/16/255
    ,- opened pty to '/sbin/fdisk -s ad0'
    < /dev/ad0: 19152 cyl 16 hd 255 sec
    < Part        Start        Size Type Flags
    <    1:          63    78140097 0xa5 0x80
    ( EOF )
    `- closed pty to '/sbin/fdisk -s ad0'
    Surveying Partition: 1: 63,78140097:165/true
    ,- opened pty to '/sbin/bsdlabel ad0s1s1'
    < bsdlabel: /dev/ad0s1s1: No such file or directory
    ( EOF )
    `- closed pty to '/sbin/bsdlabel ad0s1s1'
    Flow executing -> main/install/partition_disk (Partition Disk)
    ,- opened pty to '/sbin/mount'
    < /dev/iso9660/pfSense on / (cd9660, local, read-only)
    < devfs on /dev (devfs, local)
    < /dev/md0.uzip on /usr (ufs, local, read-only)
    < /dev/md1 on /tmp (ufs, local)
    < /dev/md2 on /var (ufs, local, noatime)
    < /dev/md3 on /etc (ufs, local, noatime)
    < /dev/md4 on /usr/local/etc (ufs, local, noatime)
    < /dev/md5 on /root (ufs, local, noatime)
    < /dev/md6 on /conf (ufs, local)
    < /conf on /cf/conf (nullfs, local)
    < devfs on /var/dhcpd/dev (devfs, local)
    < /dev/md7 on /var/db/rrd (ufs, local, soft-updates)
    ( EOF )
    `- closed pty to '/sbin/mount'
    [Mon Nov 27 20:01:36 2006]
    ,-<<< Executing `/bin/echo 'g c19152 h16 s255' >/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 1 165 255 78139905' >>/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 2 0 0 0' >>/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 3 0 0 0' >>/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'p 4 0 0 0' >>/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/echo 'a 1' >>/tmp/new.fdisk'
    `->>> Exit status: 0
    ,-<<< Executing `/bin/cat /tmp/new.fdisk'
    | g c19152 h16 s255
    | p 1 165 255 78139905
    | p 2 0 0 0
    | p 3 0 0 0
    | p 4 0 0 0
    | a 1
    `->>> Exit status: 0
    ,-<<< Executing `/sbin/fdisk -v -f /tmp/new.fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | fdisk: WARNING line 1: number of cylinders (19152) may be out-of-range
    |     (must be within 1-1024 for normal BIOS operation, unless the entire disk
    |     is dedicated to FreeBSD)
    | fdisk: ERROR line 1: number of sectors must be within (1-63)
    `->>> Exit status: 1</ic25n040atmr04></unused></unused></unused></lite-on></ic25n040atmr04-0></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></promisc></up,running></up,loopback,running,multicast></full-duplex></vlan_mtu></up,broadcast,running,simplex,multicast></rxcsum,vlan_mtu></up,broadcast,running,simplex,multicast></ic25n040atmr04></unused></unused></unused></lite-on></ic25n040atmr04-0> 
    

    after that, there was a second error

    BSD Installer started
    [Mon Nov 27 20:01:15 2006]
    DFUI connection on tcp:9999 successfully established
    ,- opened pty to '/sbin/sysctl -n hw.physmem'
    < 796286976
    - closed pty to '/sbin/sysctl -n hw.physmem'/sbin/sysctl -n hw.physmemreturned: 796286976 ,- opened pty to '/sbin/sysctl -n kern.disks' < ad0- closed pty to '/sbin/sysctl -n kern.disks'
    /sbin/sysctl -n kern.disks returned: ad0
    Testing ad0
    Invoking survey for ad0
    Surveying Disk: ad0 …
    ,- opened pty to '/sbin/atacontrol list'
    [Mon Nov 27 20:01:16 2006]
    < ATA channel 0:
    <    Master:  ad0 <ic25n040atmr04-0 mo2oad4a="">ATA/ATAPI revision 6
    <    Slave:      no device present
    < ATA channel 1:
    <    Master:      no device present
    <    Slave:  acd0 <lite-on dvd="" sohd-167t="" 9s19="">ATA/ATAPI revision 5
    ( EOF )
    - closed pty to '/sbin/atacontrol list' ,- opened pty to '/sbin/fdisk ad0' < ******* Working on device /dev/ad0 ******* < parameters extracted from in-core disklabel are: < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) < < Figures below won't work with BIOS for partitions not in cyl 1 < parameters to be used for BIOS calculations are: < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) < < Media sector size is 512 < Warning: BIOS sector numbering starts with sector 1 < Information from DOS bootblock is: < The data for partition 1 is: < sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) <    start 255, size 78139905 (38154 Meg), flag 80 (active) <  beg: cyl 0/ head 1/ sector 1; <  end: cyl 719/ head 15/ sector 63 < The data for partition 2 is: < <unused>< The data for partition 3 is: < <unused>< The data for partition 4 is: < <unused>( EOF )- closed pty to '/sbin/fdisk ad0'
    Disk ad0 (ad0: 38154MB <ic25n040atmr04 0="" mo2oad4a="">at ata0-master UDMA100): 37.26G: 19152/16/255
    ,- opened pty to '/sbin/fdisk -s ad0'
    < /dev/ad0: 19152 cyl 16 hd 255 sec
    < Part        Start        Size Type Flags
    <    1:        255    78139905 0xa5 0x80
    ( EOF )
    - closed pty to '/sbin/fdisk -s ad0' Surveying Partition: 1: 255,78139905:165/true ,- opened pty to '/sbin/bsdlabel ad0s1s1' < bsdlabel: /dev/ad0s1s1: No such file or directory ( EOF )- closed pty to '/sbin/bsdlabel ad0s1s1'
    ,- opened pty to '/sbin/ifconfig -l'
    < xl0 fxp0 lo0 pfsync0 pflog0
    - closed pty to '/sbin/ifconfig -l' ,- opened pty to '/sbin/ifconfig xl0' < xl0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500 <  options=9 <rxcsum,vlan_mtu><  inet6 fe80::210:4bff:fe06:c7fb%xl0 prefixlen 64 scopeid 0x1 <  ether 00:10:4b:06:c7:fb <  media: Ethernet autoselect (none) <  status: no carrier ( EOF )- closed pty to '/sbin/ifconfig xl0'
    ,- opened pty to '/sbin/ifconfig fxp0'
    < fxp0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
    <  options=8 <vlan_mtu><  inet6 fe80::204:acff:fee6:c514%fxp0 prefixlen 64 scopeid 0x2
    <  inet 172.16.6.44 netmask 0xffffff00 broadcast 172.16.6.255
    <  ether 00:04:ac:e6:c5:14
    <  media: Ethernet autoselect (100baseTX <full-duplex>)
    <  status: active
    ( EOF )
    - closed pty to '/sbin/ifconfig fxp0' ,- opened pty to '/sbin/ifconfig lo0' < lo0: flags=8049 <up,loopback,running,multicast>mtu 16384 <  inet6 ::1 prefixlen 128 <  inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 <  inet 127.0.0.1 netmask 0xffffff00 ( EOF )- closed pty to '/sbin/ifconfig lo0'
    ,- opened pty to '/sbin/ifconfig pfsync0'
    < pfsync0: flags=41 <up,running>mtu 2020
    <  pfsync: syncdev: lo0 maxupd: 128
    ( EOF )
    - closed pty to '/sbin/ifconfig pfsync0' ,- opened pty to '/sbin/ifconfig pflog0' < pflog0: flags=100 <promisc>mtu 33208 ( EOF )- closed pty to '/sbin/ifconfig pflog0'
    '/usr/local/share/dfuibe_lua/pit//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua/pit//..' skipped, it is a directory
    UINav.Atom 'pre_install_tasks/welcome' was configured as 'ignore'
    couldn't register UINav atom from file '050_welcome.lua'
    '100_select_language.lua' skipped, reason: nil
    registered UINav atom 'pre_install_tasks/configure_console'
    UINav.Atom 'pre_install_tasks/load_kernel_modules' was configured as 'ignore'
    couldn't register UINav atom from file '400_load_kernel_modules.lua'
    registered UINav atom 'pre_install_tasks/configure_network'
    'main.lua' skipped, it is the currently executing script
    Flow executing -> pre_install_tasks/configure_console (Configure Console)
    [Mon Nov 27 20:01:20 2006]
    Flow executing -> pre_install_tasks/configure_network (Configure your Network)
    '/usr/local/share/dfuibe_lua//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//..' skipped, it is a directory
    registered UINav atom 'main/install_os'
    UINav.Atom 'main/configure_installed_system' was configured as 'ignore'
    couldn't register UINav atom from file '400_configure.lua'
    UINav.Atom 'main/upgrade_installed_system' was configured as 'ignore'
    couldn't register UINav atom from file '600_upgrade.lua'
    UINav.Atom 'main/set_up_netboot' was configured as 'ignore'
    couldn't register UINav atom from file '800_netboot.lua'
    registered UINav atom 'main/reboot'
    '/usr/local/share/dfuibe_lua//conf' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//configure' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//install' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//lib' skipped, it is a directory
    'main.lua' skipped, it is the currently executing script
    '/usr/local/share/dfuibe_lua//netboot' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//pit' skipped, it is a directory
    '/usr/local/share/dfuibe_lua//upgrade' skipped, it is a directory
    [Mon Nov 27 20:01:21 2006]
    Menu.Item Selected -> main/install_os (Install pfSense)
    '/usr/local/share/dfuibe_lua/install//.' skipped, it is a directory
    '/usr/local/share/dfuibe_lua/install//..' skipped, it is a directory
    UINav.Atom 'main/install/welcome' was configured as 'ignore'
    couldn't register UINav atom from file '100_welcome.lua'
    registered UINav atom 'main/install/select_disk'
    registered UINav atom 'main/install/format_disk'
    registered UINav atom 'main/install/partition_disk'
    registered UINav atom 'main/install/install_bootblocks'
    registered UINav atom 'main/install/select_part'
    registered UINav atom 'main/install/select_subparts'
    UINav.Atom 'main/install/warn_omitted_subpartitions' was configured as 'ignore'
    couldn't register UINav atom from file '405_warn_omitted_subparts.lua'
    registered UINav atom 'main/install/create_subparts'
    UINav.Atom 'main/install/select_additional_filesystems' was configured as 'ignore'
    couldn't register UINav atom from file '410_select_additional_filesystems.lua'
    registered UINav atom 'main/install/preselect_packages'
    UINav.Atom 'main/install/select_packages' was configured as 'ignore'
    couldn't register UINav atom from file '450_select_packages.lua'
    UINav.Atom 'main/install/confirm_install_os' was configured as 'ignore'
    couldn't register UINav atom from file '490_confirm_install_os.lua'
    registered UINav atom 'main/install/install_os'
    registered UINav atom 'main/install/pfsense_after_install'
    UINav.Atom 'main/install/finished' was configured as 'ignore'
    couldn't register UINav atom from file '800_finished.lua'
    registered UINav atom 'main/install/reboot'
    'main.lua' skipped, it is the currently executing script
    Flow executing -> main/install/select_disk (Select Disk)
    [Mon Nov 27 20:01:22 2006]
    Flow executing -> main/install/format_disk (Format Disk)
    [Mon Nov 27 20:01:26 2006]
    ,-<<< Executing /sbin/fdisk -I ad0' | ******* Working on device /dev/ad0 ******* [Mon Nov 27 20:01:27 2006]->>> Exit status: 0
    ,-<<< Executing /bin/echo 'g c4864 h255 s63' >/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/echo 'p 1 165 63 78140097' >>/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/echo 'p 2 0 0 0' >>/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/echo 'p 3 0 0 0' >>/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/echo 'p 4 0 0 0' >>/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/echo 'a 1' >>/tmp/format.fdisk'->>> Exit status: 0
    ,-<<< Executing /bin/cat /tmp/format.fdisk' | g c4864 h255 s63 | p 1 165 63 78140097 | p 2 0 0 0 | p 3 0 0 0 | p 4 0 0 0 | a 1->>> Exit status: 0
    ,-<<< Executing /sbin/fdisk -v -f /tmp/format.fdisk ad0' | ******* Working on device /dev/ad0 ******* | fdisk: WARNING line 1: number of cylinders (4864) may be out-of-range |    (must be within 1-1024 for normal BIOS operation, unless the entire disk |    is dedicated to FreeBSD) | parameters extracted from in-core disklabel are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Figures below won't work with BIOS for partitions not in cyl 1 | parameters to be used for BIOS calculations are: | cylinders=4864 heads=255 sectors/track=63 (16065 blks/cyl) | | Information from DOS bootblock is: | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) |    start 63, size 78140097 (38154 Meg), flag 80 (active) |  beg: cyl 0/ head 1/ sector 1; |  end: cyl 767/ head 254/ sector 63 | 2: <unused>| 3: <unused>| 4: <unused>->>> Exit status: 0
    ,-<<< Executing /sbin/fdisk ad0' | ******* Working on device /dev/ad0 ******* | parameters extracted from in-core disklabel are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Figures below won't work with BIOS for partitions not in cyl 1 | parameters to be used for BIOS calculations are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Media sector size is 512 | Warning: BIOS sector numbering starts with sector 1 | Information from DOS bootblock is: | The data for partition 1 is: | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) |    start 63, size 78140097 (38154 Meg), flag 80 (active) |  beg: cyl 0/ head 1/ sector 1; |  end: cyl 767/ head 254/ sector 63 | The data for partition 2 is: | <unused>| The data for partition 3 is: | <unused>| The data for partition 4 is: | <unused>->>> Exit status: 0
    ,-<<< Executing /usr/bin/yes | /sbin/fdisk -B ad0' | ******* Working on device /dev/ad0 ******* | parameters extracted from in-core disklabel are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Figures below won't work with BIOS for partitions not in cyl 1 | parameters to be used for BIOS calculations are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Media sector size is 512 | Warning: BIOS sector numbering starts with sector 1 | Information from DOS bootblock is: | The data for partition 1 is: | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) |    start 63, size 78140097 (38154 Meg), flag 80 (active) |  beg: cyl 0/ head 1/ sector 1; |  end: cyl 767/ head 254/ sector 63 | The data for partition 2 is: | <unused>| The data for partition 3 is: | <unused>| The data for partition 4 is: | <unused>| Do you want to change the boot code? [n] | We haven't changed the partition table yet.  This is your last chance. | parameters extracted from in-core disklabel are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Figures below won't work with BIOS for partitions not in cyl 1 | parameters to be used for BIOS calculations are: | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) | | Information from DOS bootblock is: | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) |    start 63, size 78140097 (38154 Meg), flag 80 (active) |  beg: cyl 0/ head 1/ sector 1; |  end: cyl 767/ head 254/ sector 63 | 2: <unused>| 3: <unused>| 4: <unused>| Should we write new partition table? [n] yes: stdout: Broken pipe->>> Exit status: 0
    ,- opened pty to '/sbin/sysctl -n hw.physmem'
    < 796286976
    - closed pty to '/sbin/sysctl -n hw.physmem'/sbin/sysctl -n hw.physmemreturned: 796286976 ,- opened pty to '/sbin/sysctl -n kern.disks' < ad0- closed pty to '/sbin/sysctl -n kern.disks'
    /sbin/sysctl -n kern.disks returned: ad0
    Testing ad0
    Invoking survey for ad0
    Surveying Disk: ad0 …
    ,- opened pty to '/sbin/atacontrol list'
    < ATA channel 0:
    <    Master:  ad0 <ic25n040atmr04-0 mo2oad4a="">ATA/ATAPI revision 6
    <    Slave:      no device present
    < ATA channel 1:
    <    Master:      no device present
    <    Slave:  acd0 <lite-on dvd="" sohd-167t="" 9s19="">ATA/ATAPI revision 5
    ( EOF )
    - closed pty to '/sbin/atacontrol list' ,- opened pty to '/sbin/fdisk ad0' < ******* Working on device /dev/ad0 ******* < parameters extracted from in-core disklabel are: < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) < < Figures below won't work with BIOS for partitions not in cyl 1 < parameters to be used for BIOS calculations are: < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl) < < Media sector size is 512 < Warning: BIOS sector numbering starts with sector 1 < Information from DOS bootblock is: < The data for partition 1 is: < sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) <    start 63, size 78140097 (38154 Meg), flag 80 (active) <  beg: cyl 0/ head 1/ sector 1; <  end: cyl 767/ head 254/ sector 63 < The data for partition 2 is: < <unused>< The data for partition 3 is: < <unused>< The data for partition 4 is: < <unused>( EOF )- closed pty to '/sbin/fdisk ad0'
    Disk ad0 (ad0: 38154MB <ic25n040atmr04 0="" mo2oad4a="">at ata0-master UDMA100): 37.26G: 19152/16/255
    ,- opened pty to '/sbin/fdisk -s ad0'
    < /dev/ad0: 19152 cyl 16 hd 255 sec
    < Part        Start        Size Type Flags
    <    1:          63    78140097 0xa5 0x80
    ( EOF )
    - closed pty to '/sbin/fdisk -s ad0' Surveying Partition: 1: 63,78140097:165/true ,- opened pty to '/sbin/bsdlabel ad0s1s1' < bsdlabel: /dev/ad0s1s1: No such file or directory ( EOF )- closed pty to '/sbin/bsdlabel ad0s1s1'
    Flow executing -> main/install/partition_disk (Partition Disk)
    ,- opened pty to '/sbin/mount'
    < /dev/iso9660/pfSense on / (cd9660, local, read-only)
    < devfs on /dev (devfs, local)
    < /dev/md0.uzip on /usr (ufs, local, read-only)
    < /dev/md1 on /tmp (ufs, local)
    < /dev/md2 on /var (ufs, local, noatime)
    < /dev/md3 on /etc (ufs, local, noatime)
    < /dev/md4 on /usr/local/etc (ufs, local, noatime)
    < /dev/md5 on /root (ufs, local, noatime)
    < /dev/md6 on /conf (ufs, local)
    < /conf on /cf/conf (nullfs, local)
    < devfs on /var/dhcpd/dev (devfs, local)
    < /dev/md7 on /var/db/rrd (ufs, local, soft-updates)
    ( EOF )
    - closed pty to '/sbin/mount' [Mon Nov 27 20:01:36 2006] ,-<<< Executing/bin/echo 'g c19152 h16 s255' >/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'p 1 165 255 78139905' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'p 2 0 0 0' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'p 3 0 0 0' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'p 4 0 0 0' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'a 1' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/cat /tmp/new.fdisk'
    | g c19152 h16 s255
    | p 1 165 255 78139905
    | p 2 0 0 0
    | p 3 0 0 0
    | p 4 0 0 0
    | a 1
    ->>> Exit status: 0 ,-<<< Executing/sbin/fdisk -v -f /tmp/new.fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | fdisk: WARNING line 1: number of cylinders (19152) may be out-of-range
    |    (must be within 1-1024 for normal BIOS operation, unless the entire disk
    |    is dedicated to FreeBSD)
    | fdisk: ERROR line 1: number of sectors must be within (1-63)
    ->>> Exit status: 1 [Mon Nov 27 20:02:30 2006] ,-<<< Executing/sbin/fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Media sector size is 512
    | Warning: BIOS sector numbering starts with sector 1
    | Information from DOS bootblock is:
    | The data for partition 1 is:
    | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |    start 63, size 78140097 (38154 Meg), flag 80 (active)
    |  beg: cyl 0/ head 1/ sector 1;
    |  end: cyl 767/ head 254/ sector 63
    | The data for partition 2 is:
    | <unused>| The data for partition 3 is:
    | <unused>| The data for partition 4 is:
    | <unused>->>> Exit status: 0 ,- opened pty to '/sbin/sysctl -n hw.physmem' < 796286976- closed pty to '/sbin/sysctl -n hw.physmem'
    /sbin/sysctl -n hw.physmem returned: 796286976
    ,- opened pty to '/sbin/sysctl -n kern.disks'
    < ad0
    - closed pty to '/sbin/sysctl -n kern.disks'/sbin/sysctl -n kern.disksreturned: ad0 Testing ad0 Invoking survey for ad0 Surveying Disk: ad0 … ,- opened pty to '/sbin/atacontrol list' < ATA channel 0: <    Master:  ad0 <ic25n040atmr04-0 mo2oad4a="">ATA/ATAPI revision 6 <    Slave:      no device present < ATA channel 1: <    Master:      no device present <    Slave:  acd0 <lite-on dvd="" sohd-167t="" 9s19="">ATA/ATAPI revision 5 ( EOF )- closed pty to '/sbin/atacontrol list'
    ,- opened pty to '/sbin/fdisk ad0'
    < ******* Working on device /dev/ad0 *******
    < parameters extracted from in-core disklabel are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Figures below won't work with BIOS for partitions not in cyl 1
    < parameters to be used for BIOS calculations are:
    < cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    <
    < Media sector size is 512
    < Warning: BIOS sector numbering starts with sector 1
    < Information from DOS bootblock is:
    < The data for partition 1 is:
    < sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    <    start 63, size 78140097 (38154 Meg), flag 80 (active)
    <  beg: cyl 0/ head 1/ sector 1;
    <  end: cyl 767/ head 254/ sector 63
    < The data for partition 2 is:
    < <unused>< The data for partition 3 is:
    < <unused>< The data for partition 4 is:
    < <unused>( EOF )
    - closed pty to '/sbin/fdisk ad0' Disk ad0 (ad0: 38154MB <ic25n040atmr04 0="" mo2oad4a="">at ata0-master UDMA100): 37.26G: 19152/16/255 ,- opened pty to '/sbin/fdisk -s ad0' < /dev/ad0: 19152 cyl 16 hd 255 sec < Part        Start        Size Type Flags <    1:          63    78140097 0xa5 0x80 ( EOF )- closed pty to '/sbin/fdisk -s ad0'
    Surveying Partition: 1: 63,78140097:165/true
    ,- opened pty to '/sbin/bsdlabel ad0s1s1'
    < bsdlabel: /dev/ad0s1s1: No such file or directory
    ( EOF )
    - closed pty to '/sbin/bsdlabel ad0s1s1' [Mon Nov 27 20:02:31 2006] Flow executing -> main/install/install_bootblocks (Install Bootblocks) [Mon Nov 27 20:02:32 2006] ,-<<< Executing/usr/sbin/boot0cfg -B -o packet -s 1 /dev/ad0'
    [Mon Nov 27 20:02:33 2006]
    ->>> Exit status: 0 ,-<<< Executing/usr/sbin/boot0cfg -v /dev/ad0'
    | #  flag    start chs  type      end chs      offset        size
    | 1  0x80      0:  1: 1  0xa5    767:254:63          63    78140097
    |
    | version=1.0  drive=0x80  mask=0xf  ticks=182
    | options=packet,update,nosetdrv
    | default_selection=F1 (Slice 1)
    ->>> Exit status: 0 [Mon Nov 27 20:02:34 2006] Flow executing -> main/install/select_part (Select Partition) ,- opened pty to '/sbin/mount' < /dev/iso9660/pfSense on / (cd9660, local, read-only) < devfs on /dev (devfs, local) < /dev/md0.uzip on /usr (ufs, local, read-only) < /dev/md1 on /tmp (ufs, local) < /dev/md2 on /var (ufs, local, noatime) < /dev/md3 on /etc (ufs, local, noatime) < /dev/md4 on /usr/local/etc (ufs, local, noatime) < /dev/md5 on /root (ufs, local, noatime) < /dev/md6 on /conf (ufs, local) < /conf on /cf/conf (nullfs, local) < devfs on /var/dhcpd/dev (devfs, local) < /dev/md7 on /var/db/rrd (ufs, local, soft-updates) ( EOF )- closed pty to '/sbin/mount'
    ,- opened pty to '/usr/sbin/pstat -s -k'
    < Device          1K-blocks    Used    Avail Capacity
    ( EOF )
    - closed pty to '/usr/sbin/pstat -s -k' [Mon Nov 27 20:02:35 2006] ,-<<< Executing/sbin/fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | parameters extracted from in-core disklabel are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Figures below won't work with BIOS for partitions not in cyl 1
    | parameters to be used for BIOS calculations are:
    | cylinders=19152 heads=16 sectors/track=255 (4080 blks/cyl)
    |
    | Media sector size is 512
    | Warning: BIOS sector numbering starts with sector 1
    | Information from DOS bootblock is:
    | The data for partition 1 is:
    | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    |    start 63, size 78140097 (38154 Meg), flag 80 (active)
    |  beg: cyl 0/ head 1/ sector 1;
    |  end: cyl 767/ head 254/ sector 63
    | The data for partition 2 is:
    | <unused>| The data for partition 3 is:
    | <unused>| The data for partition 4 is:
    | <unused>->>> Exit status: 0 ,-<<< Executing/bin/echo 'g c19152 h16 s255' >/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'p 1 165 63 78140097' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/echo 'a 1' >>/tmp/new.fdisk'
    ->>> Exit status: 0 ,-<<< Executing/bin/cat /tmp/new.fdisk'
    | g c19152 h16 s255
    | p 1 165 63 78140097
    | a 1
    ->>> Exit status: 0 ,-<<< Executing/sbin/fdisk -v -f /tmp/new.fdisk ad0'
    | ******* Working on device /dev/ad0 *******
    | fdisk: WARNING line 1: number of cylinders (19152) may be out-of-range
    |    (must be within 1-1024 for normal BIOS operation, unless the entire disk
    |    is dedicated to FreeBSD)
    | fdisk: ERROR line 1: number of sectors must be within (1-63)
    `->>> Exit status: 1</unused></unused></unused></ic25n040atmr04></unused></unused></unused></lite-on></ic25n040atmr04-0></unused></unused></unused></ic25n040atmr04></unused></unused></unused></lite-on></ic25n040atmr04-0></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></unused></promisc></up,running></up,loopback,running,multicast></full-duplex></vlan_mtu></up,broadcast,running,simplex,multicast></rxcsum,vlan_mtu></up,broadcast,running,simplex,multicast></ic25n040atmr04></unused></unused></unused></lite-on></ic25n040atmr04-0>

    So i'm not really sure if it's an error, because i clicked "skip" and he continoued the installation.

    After that, the HD told me CRC error.

    Ok, but the first time, i installed it with an older release and another HD, i got the same error, without the CRC Error on the first boot.

    So is that an usual install error? :)

    Greets

    Voltron



  • crc error usually means that the HD has physical problems. Maybe bad sectors, maybe bad cable.



  • Also change the type of the IDE in the BIOS if it supports it to CHS.



  • the CRC error is ok.
    But i got this error on another installation too, but after that it worked fine.

    So any more ideas? :)


Locked