Multiple LAN Subnets problem Alix Board
I am trying to create 2 LANS on one interface
Sucessfully created OPT2 and bridged to LAN
LAN is 192.168.10.1/24
OPT2 is 192.168.1.1/24
Opened up firewall on LAN OPT2 and WAN Basically accept everything from everything all lights green
From a PC hooked direct to ETH0 192.168.1.100/24
Ping - times out
From the box pinging 192.168.1.100 all comes back no problem
Cannot duplicate problem on a virtual machine and on the surface looks like an Alix problem or I could be doing something dumb.Any ideas ?
Cry Havok last edited by
If you're bridging 2 interfaces then you must use the same IP range on all interfaces.
Can you clarify what you're pinging from where?