Malo device firmware
-
I can't install the firmware for the malo device correct.
Found this. http://forums.freebsd.org/showthread.php?t=16541 But cant "make" because "make" isn't installed.
Have also tried this firmware tips http://zentience.org/pdfman/section-4/malo.pdf.
But can't get it work. Some one got an idea?
/Fredrik
-
I need to add the malo firmware to the builds but you are the first person with a malo card I have seen ask about it. :-)
You know that the malo cards do not support access point mode, right? They can only be station (infrastructure) nodes.
-
I didn't know the malo only didn't support AP mode. So my malo card I can throw away… But I can't get my RT2720 card work. Shouldn't the run driver be included?
/Fredrik
-
I need the ralink driver. http://repo.or.cz/w/ralink_drivers.git
My card.
none1@pci0:5:4:0: class=0x028000 card=0x27601814 chip=0x07011814 rev=0x00 hdr=0x00
class = network
bar [10] = type Memory, range 32, base 0xe0a00000, size 65536, enabled
cap 01[40] = powerspec 3 supports D0 D3 current D0Here is a little more info. http://forums.freebsd.org/showthread.php?p=60865
-
We have talked about that driver before and how it won't be added until they at least fix their broken driver name. A driver name shouldn't also include numbers, it would break things in several areas. From that thread it doesn't look like it's very stable either.
-
I seen. Found the thread. So the only way is to build the ralink driver my self.
/Fredrik
