OPT1 half-bridge not working
-
opt1 = dhcp. modem on opt1 has ppp ip extension (kinda like half bridge). opt1 gets wan ip but is unable to make connection outside (unplugged wan1 for testing sakes). when opt1 is connected directly to a test pc, test pc is able to connect no problem. what's wrong here? :(
under routing. gw_opt1 dynamic=public_ip (in screenshot, i tookdown opt1 temporarily)
-
i've now tested half-bridge on WAN. Same problem.
i've also tested dmz on OPT1 instead of half-bridge(ppp ip extension). i can only ping what i've setup in static route.can anybody have a look at my rules? i dont see any prob… what am i missing.
-
alright i got dmz to work.
i just can't get half-bridge to work. tried a lot of stuff too.
with half bridge,
opt1.ip == opt1.router.ip == public.ip == gateway.ip (system > routing)
on my test pc, this works fine.
on oct 12 build.
help appreciated thanks!