Problem forwarding ports
-
Have not had a problem before doing forwards, but today I am
Setup:
2.0-BETA4 (i386)
built on Wed Oct 20 06:03:46 EDT 2010
FreeBSD 8.1-RELEASE-p1
Wan 1 /27 Wan 2 /20 (one using 1 ip from each at the moment.
Created the Nat rule to forward 443 to an internal address of 192.168.x.11 (example address)
I turned on all logging so I can watch the request in the logs.
It does pass the Wan, but the packet never gets back.
My two WAN’s are in a gateway group.
I have to be missing something…right?
Thanks in advance. -
Hey there,
There are apparently issues with Multi-WAN and NAT for the past while. I believe this is probably part of the same issue which is already known - so it is likely nothing to do with an error on your part.
Basically it seems that the reply-to is always going out WAN1 even if the request was made via WAN2. Anyway - I'm sure there is way more to it than that…
A lot can be gleamed from looking over the bugtracker :
http://redmine.pfsense.org/issues/958
and
http://redmine.pfsense.org/issues/969
-- Phob