Squid Returned to Packages *** PLEASE TEST ***
-
well, put the deny all acl on top and see if that works :-)
-
I upgraded package squid-2.5.14_2 to 2.6.5
Squid began to issue error:./restart_squid.sh
Restarting Squid whith config
2006/12/22 19:50:54| aclParseAclLine: Invalid ACL type 'snmp_community'
FATAL: Bungled squid.conf line 83: acl snmppublic snmp_community public
Squid Cache (Version 2.6.STABLE5): Terminated abnormally.
CompleteHow make on install –enable-snmp ???
Sergu
-
STOP INSTALLING THE PACKAGE FROM THE SHELL/CLI/CONSOLE.
reinstall the package from the webgui. Click System -> Packages -> Installed Packages -> reinstall package Icon.
-
Hmmm, here with my system it won't install at all…
That's what it tells me:_Downloading package configuration file… done.
Saving updated package information... done.
Downloading squid and its dependencies... done.
Checking for successful package installation... failed!Installation aborted._
-
Hmmm, here with my system it won't install at all…
That's what it tells me:_Downloading package configuration file… done.
Saving updated package information... done.
Downloading squid and its dependencies... done.
Checking for successful package installation... failed!Installation aborted._
May be previous version of squeed don't deinstall correctly?
Check this can in -
Command Prompt: pkg_info- deinstall squid
- run pkg_info - squid package exists?
- if present need deinstall them: pkg_delete squid-2.5.-next number–
after need install squid package again.
-
No, it's not that, I already tried…
I also use the latest snapshot 21-12in which package does the ldap client come along ?
might be that one ? -
save the config, reinstall your box. Then reinstall squid.
It only takes 10 minutes and you can run from livecd with the config on a usb stick whil you are installing.
Just put you existing config on a stick in the conf/ subdirectory named config.xml.After rebooting the newly installed system will allready have the correct config.
-
nice to see that squid is back.The problem is that is not working like before.I wanna use a transparent proxy as my gateway but it cannot be used like that because of an error that says that cannot run in the same mode like webgui.Wich is the protocol for the webgui?I`ve tried a lot of ports but still nothing
-
Change the port the webConfigurator is running on.
-
When I disable the checkbox log location and leave the field for the log location empty, I cannot save because it wants me to enter a location, even if i won't use it, so perhaps you should disable the check for the dir when the checkbox is disabled…
-
One more bugfix in squid.inc, string 352.
Original:foreach (explode(trim($post['msnt_secondary'])) as $server) {must be changed on:
foreach (explode(',', trim($post['msnt_secondary'])) as $server) { -
Thanks, commited!
-
So enter a log location anyways. It's required.
-
Using p5.
On line 915 of squid.inc a reference is made to $port:
$rules .= "pass in quick on $iface proto tcp from any to !($iface) port $port flags S/SA keep state\n";I have a port defined, however, at this point in the script the $port variable has nothing assigned to it so I get a bad rule. My fix was just to comment that line out as I'm only using transparent proxy.
-
Using p5.
On line 915 of squid.inc a reference is made to $port:
$rules .= "pass in quick on $iface proto tcp from any to !($iface) port $port flags S/SA keep state\n";I have a port defined, however, at this point in the script the $port variable has nothing assigned to it so I get a bad rule. My fix was just to comment that line out as I'm only using transparent proxy.
You are not running the latest squid package. There are only 863 lines in squid.inc on the latest and the pass rules do not look anything like that…
-
looks like we're back to:
stopping /usr/local/etc/rc.d/proxy_monitor.sh…
again.
just installed squid and used transparent proxy.
-
looks like we're back to:
stopping /usr/local/etc/rc.d/proxy_monitor.sh…
again.
just installed squid and used transparent proxy.
Upgrade to latest snapshot.
-
It's really late here so I could be off the mark; but I also think there's something funky going on. I'm also getting the empty $port creating:
There were error(s) loading the rules: /tmp/rules.debug:250: syntax errorpfctl: Syntax error in config file: pf rules not loaded - The line in question reads [250]: pass in quick on sk0 proto tcp from any to !(sk0) port flags S/SA keep state…
I've just reinstalled and am using 2.6.5_1-p5. I'll take another look tomorrow evening if I have a chance.... I'm sure someone will figure it out before I do.
-
My bad, fixing into P6
-
Fixed.