SquidGuard package TEST

[dcabot]

Has development on this stopped?

[dcabot]

A couple of issues that I am seeing:
MINOR
The run status always says STOPPED
When you install SquidGuard, it does not require Squid.  dependency failure?

PROBLEMS
After installing SquidGuard the first thing I do is download the latest blacklist.

On the General Settings tab
I click on ENABLE and I click the checkbox to enable the BLACKLIST.  I click on SAVE

I click on the TIMES tab and create an entry for ALWAYS

I click on the DEFAULT tab.  I set the default time to ALWAYS.  I click on porn and I click to deny access.  I click SAVE.  Under Default Redirect I put 403.  I go back to the General Settings tab and click APPLY.

Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file.  It was not blocked.

RECOMMENDATIONS
On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc).  I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop.

[dhipo]

@dcabot:

A couple of issues that I am seeing:
MINOR
The run status always says STOPPED
When you install SquidGuard, it does not require Squid.  dependency failure?

PROBLEMS
After installing SquidGuard the first thing I do is download the latest blacklist.

On the General Settings tab
I click on ENABLE and I click the checkbox to enable the BLACKLIST.  I click on SAVE

I click on the TIMES tab and create an entry for ALWAYS

I click on the DEFAULT tab.  I set the default time to ALWAYS.  I click on porn and I click to deny access.  I click SAVE.  Under Default Redirect I put 403.  I go back to the General Settings tab and click APPLY.

Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file.  It was not blocked.

RECOMMENDATIONS
On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc).  I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop.

ok

squid must be installed to squidguard works

second … it's necessary download blacklists to squidguard works...

if you want an block everytime it's not necessary use time definition ..

let'me know more about  your issue .

[dvserg]

2 dhipo: Thanks for you replay.  :)

BlackList not obligatory. You can use you own destination rules;

–-----------------------
In the near future finally place corrections for "transparent proxy problem"
I have to do(make) one uncomfortable thing, which will require reconfiguring the package when change internal IP (will need click Button "Apply")  :)

[dhipo]

ok …
customized destinations can be combined with default blacklists.

use blacklists mean .. to block sites ... you need  or blacklists, or custom destinations , or both ..

[srs]

Here I have the same: squidguard installed and configured but do not block porn site taken on file /var/db/squidGuard/porn/domains…

My config is the most simple possible, no time, only default acl blocking porn...

any idea?

srs

[dvserg]

Please answer on some question:

• you install package from official list ?
• you don't update blacklist from internet? (if update - where blacklist url)
• what url's non blocked?

ps
need check exists this url on block list or no.

[srs]

@dvserg:

Please answer on some question:

• you install package from official list ?
• you don't update blacklist from internet? (if update - where blacklist url)
• what url's non blocked?

ps
need check exists this url on block list or no.

• Yes, package installed from official list
• Yes, downloaded black list from internet (http://squidguard.mesd.k12.or.us/blacklists.tgz)
• I tested with one url taken from the file /var/db/squidGuard/porn/domains, line 600000, if I'm not wrong; it should work for any of that urls, isnt??

thanks

ps: its strange, cause it seems SG is running: my processor load is up to 51% (dual core, pentium D)!!!

[dvserg]

Also

• squidGuard started (looking main package page for this or Services menu)?
• squid transparent mode?
• and can you post squidGuard config? (from 'Log' page) (to pm for example)

[srs]

@dvserg:

Also

• squidGuard started (looking main package page for this or Services menu)?
• squid transparent mode?
• and can you post squidGuard config? (from 'Log' page) (to pm for example)

• Squidguard running, from services menu
• proxy in transparency mode since before sg
• here goes the config:
  /usr/local/etc/squidGuard/squidGuard.conf

============================================================

SquidGuard configuration file

This file generated automaticly with SquidGuard configurator

(C)2006 Serg Dvoriancev

email: dv_serg@mail.ru

============================================================

logdir /var/squidGuard/log
dbhome /var/db/squidGuard

acl {
default {
pass none
redirect http://127.0.0.1/sgerror.php
}
}

There is something wrong with this config, here I cannot see my source (Lan) and any configuration about blacklist…

is there any way of reseting sg config?

[dvserg]

My liken 'transparent mode'.
Can you tomorrow continue checking?
I know this problem. Believe solve this problem.
Thanks. Good night.

[srs]

@dvserg:

My liken 'transparent mode'.
Can you tomorrow continue checking?
I know this problem. Believe solve this problem.
Thanks. Good night.

I can check tomorrow, It would be nice to help; only tell me what to do.

thanks and good night!

[dvserg]

Hi
Please Enable View GIU Log option & press 'Save' button,
Then press 'Apply' button and get to my PM 'Web GUI log (Last 50)' content and
result squidGuard config from last (Log) page

[KARLAGIN]

19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty

What is mean?

[dvserg]

@KARLAGIN:

19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty

What is mean?

In Destinations page you have Empty item(s)
One from domains, expressions, urls must be defined.