Kernel Panic

FisherKing

As a start, you can install the developer kernel.

After the panic type "bt" at the debugger console and capture that info as well as the panic.

Directions for installing the developer kernel are at the following link

http://doc.pfsense.org/index.php/Switching_Kernels

ti-guilherme

Hi Guys,

Here I have the same problem when I active the Squid…

I´m testing since version: pfSense-2.0-BETA5-20101228-0454.iso.gz to pfSense-2.0-BETA5-20110101-1659.iso.gz.

If I don´t use Squid the problem doesn´t hapen... this was done in a lab, about ten users were use to test.

We need open a Bug to report this...

Luiz Ferreira.

jimp

Since those snapshots are nearly a week old, before you report any problem, make sure it can be reproduced on the most current snapshot available.

And if you get a panic, we need the full text of the panic (even a picture of the screen is OK) and if possible, install a debug kernel (as PJ2 mentioned) and get a backtrace.

Be careful with posting or reporting bugs to an existing thread or ticket about panics, too, since they could be unrelated unless the circumstances and panic message are identical.

LostInIgnorance

The panic shows still after a most recent update [2.0-BETA5 (i386) built on Wed Jan 5 03:16:13 EST 2011]. Same panic as above.
If it helps out any, I am running 2008 r2 and connecting using a win7 client. I noticed the panic happens after the kerbros handshake, when it is "initiating remote connection"

EDIT: I tried do load the developer kernel on my Soekris board and it didn't work, using the above link and instructions. It actually crashed the system and wouldn't boot. I will try it on the p4 later today, hopefully I won't have the same outcome.

EDIT EDIT: This is a copy of this afternoons crash from my home system.

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address= 0x0
fault code= supervisor read, page not present
instruction pointer= 0x20:0x0
stack pointer        = 0x28:0xd5341bf4
frame pointer        = 0x28:0xd5341c28
code segment= base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process= 11 (irq5: vr1)
trap number= 12
panic: page fault
cpuid = 0
Uptime: 1d19h33m12s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...

The firewall crashed while I was out and trying to remote into my home system. I am using squid in transparency mode. I haven't tried disabling squid.

LostInIgnorance

Is anyone else able to get the panic logged? I can't get the developer setup on either one of the firewalls. I can't afford the downtime.

vito

I had a thread started on this here from dec 13, but noticed this one
http://forum.pfsense.org/index.php/topic,31031.msg163019.html#msg163019

i just posted this pic on my thread.

EDIT: If this helps, i have mutiple vlans on em1 on this box. A few of the other firewalls with the problem, no vlans on the interface.

fw.JPG_thumb

vito

Here is a screen shoot of the debug in the dev kernel. Can not get to the console at the moment for any more info

fw.JPG_thumb

odin

I have exactly the same kernel crashes in FreeBSD7 and 8. To me, it seems to be related to VLAN tags and NICs.

http://forums.freebsd.org/showthread.php?t=18676

(see last post #8)

LostInIgnorance

Successfully grabbed the panic in developer mode

Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex em0 (EM TX Lock) r = 0 (0xc2f52580) locked @ /usr/pfSensesrc/src/sys/dev/e1000/if_lem.c:1350
KDB: stack backtrace:
X_db_sym_numargs(c0eb7066,e302aa90,c0a41d45,546,0,...) at X_db_sym_numargs+0x146
kdb_backtrace(546,0,ffffffff,c145d1ac,e302aac8,...) at kdb_backtrace+0x29
witness_display_spinlock(c0eb957e,e302aadc,4,1,0,...) at witness_display_spinlock+0x75
witness_warn(5,0,c0ef792d,14,c131b140,...) at witness_warn+0x20d
trap(e302ab68) at trap+0x19e
alltraps(c336dc00,dedeadc0,c336dc00,c336dc00,e302abf0,...) at alltraps+0x1b
m_tag_delete_chain(c336dc00,0,c0e6e512,0,c2ed9bc0,...) at m_tag_delete_chain+0x3f
reallocf(c336dc00,100,0,c0a42798,df,...) at reallocf+0x8a5
uma_zfree_arg(c1d7e380,c336dc00,0,bc,e302ac84,...) at uma_zfree_arg+0x29
m_freem(c336dc00,4,c0e6e512,b87,c2f4e000,...) at m_freem+0x43
ed_probe_RTL80x9(c2f52580,0,c0e6e512,546,c2f525bc,...) at 0xc06ec448
ed_probe_RTL80x9(c2f4e000,1,c0eb8937,4f,c2edb918,...) at 0xc06efe10
taskqueue_run(c2edb900,c2edb918,c0ea5cf0,0,c0eb1f96,...) at taskqueue_run+0x103
taskqueue_thread_loop(c2f525ec,e302ad38,c0eaeb05,344,c131b140,...) at taskqueue_thread_loop+0x68
fork_exit(c0a3afc0,c2f525ec,e302ad38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xe302ad70, ebp = 0 ---

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address= 0xdedeadc0
fault code= supervisor read, page not present
instruction pointer= 0x20:0xc0a60fe8
stack pointer        = 0x28:0xe302aba8
frame pointer        = 0x28:0xe302abb8
code segment= base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process= 0 (em0 taskq)
[thread]
Stopped at      m_tag_delete+0x48:      movl    0(%ecx),%eax
db> [/thread]

jimp

Looks like it may be in the Intel driver… fun.

LostInIgnorance

so, is it something you guys can fix or is it something with freebsd?

jimp

Hopefully it's fixable, though lem is legacy em, so it's some rather old/early em chipsets. Might explain why so few people have hit it.

LostInIgnorance

If it is an intel problem, then why would I be recieving the same problem on my soekris net5501-70 board? that uses a VIA VT6105M chip.

jimp

Without a backtrace from there it's impossible to say.

vito

@jimp:

Hopefully it's fixable, though lem is legacy em, so it's some rather old/early em chipsets. Might explain why so few people have hit it.

Jim
where do you see it is an old legacy nic/driver? (not questioning, just Curious) :)
just an fyi, had no problem with oct snaps.

Thanks for your help

jimp

@vito:

where do you see it is an old legacy nic/driver? (not questioning, just Curious) :)
just an fyi, had no problem with oct snaps.


exclusive sleep mutex em0 (EM TX Lock) r = 0 (0xc2f52580) locked @ /usr/pfSensesrc/src/sys/dev/e1000/if_lem.c:1350

if_lem.c. lem is legacy em, a normal em card would have been in if_em.c

FisherKing

Hmm - that line looks similar to the panic I get when captive portal is enabled on my box.


exclusive sleep mutex fxp0 (network driver) r = 0 (0xc36de018) locked @ /usr/pfSensesrc/src/sys/dev/fxp/if_fxp.c:1288

Details here:
http://forum.pfsense.org/index.php/topic,30791.msg159227.html#msg159227

CryoGenID gets a panic but with yet another set of drivers. Cino does as well.
http://forum.pfsense.org/index.php/topic,29839.60.html

Is there anything we can do to help besides posting back traces?

jimp

I just spent a bit of time on the phone with someone who hit this. It does seem to be related to OpenVPN somehow (or the kind of traffic that is seen more often with OpenVPN I suppose). Once we had the developer kernel on it stayed up for quite a while until we had someone connect with OpenVPN and generate some traffic.

jimp

A patch was just committed by ermal that might be a potential fix for this, or at least change the behavior somewhat. Give the next snapshot a try.

Jonb

Just as a side note I was getting a kernal panic with the PPPOA interface being selected to WAN rather than rl1. Not sure if that is due to incorrect config but if so might be worth removing to save people the hassle.