IPv6 testing
-
Works morbus, thanks!
-
@Databeestje, I've found a bug in the diagnostics DNS lookup page located at /diag_dns.php. The first time I try to resolve a hostname by an IPv6 address, it works. When I click the DNS Lookup button again, it shows no result. When I click it again, it does show the result. When I click it again it shows no results, etc. When entering an IPv4 address, it does work okay every time.
Should I enter bugs like this through the redmine form?
-
Hi,
I found a small error on this page: services_dhcpv6.php?if=lan
If I fill the DNS servers entry on this page, the setting is saved correctly.
But when I want the edit again, the setting does nog show up and is blank again. The input-field is not correctly filled with the setting.Hi Databeestje,
I found the bug described above. The DNSserver field on the DHCPv6 settingspage was not showing correctly.
With the extra code below it does load ok.please insert this patch:
153d152 < list($pconfig['dns1'],$pconfig['dns2']) = $config['dhcpdv6'][$if]['dnsserver']; -
@Databeestje, I've found a bug in the diagnostics DNS lookup page located at /diag_dns.php. The first time I try to resolve a hostname by an IPv6 address, it works. When I click the DNS Lookup button again, it shows no result. When I click it again, it does show the result. When I click it again it shows no results, etc. When entering an IPv4 address, it does work okay every time.
Should I enter bugs like this through the redmine form?
Feel free to keep posting them here for a while. Until the code is merged into the normal git tree we'll keep it here. It is sufficiently quiet here that it's easy to keep up on.
Some of the other boards are so crowded that it becomes hard to follow. If you do create redmine tickets please assign them to smos.
-
I've noticed line 167 of system_firmware_settings.php disables gitsync in web gui on platforms such as nanobsd. Since there are nanobsd IPv6 images and as far as I can tell it works fine on nanobsd…is there some other reason this feature is disabled on the web gui?
-
You'll have to ask that in a embbeded board. No idea.
-
I've noticed line 167 of system_firmware_settings.php disables gitsync in web gui on platforms such as nanobsd. Since there are nanobsd IPv6 images and as far as I can tell it works fine on nanobsd…is there some other reason this feature is disabled on the web gui?
Probably because when that was first implemented, it didn't work on NanoBSD, and I'd still be inclined to not do a gitsync on NanoBSD in general, since the large number of CF writes involved would be detrimental to the lifetime of the CF.
-
openvpn with ipv6 support is now included, it will slowly be integrated over the next few weeks.
The biggest issue is that most clients do not support it yet.
-
openvpn with ipv6 support is now included, it will slowly be integrated over the next few weeks.
The biggest issue is that most clients do not support it yet.
I gitsync and updated my snapshot. I'm seeing this error in my OpenVPN logs and my RoadWarrior service wont start:
Apr 25 19:58:40 openvpn[5266]: Use --help for more information. Apr 25 19:58:40 openvpn[5266]: Options error: --tun-ipv6 cannot be used with --mode serverI was able to get it running by manually editing the server1.conf file, removing the tun-ipv6 entry
-
You have a old openvpn binary, you need to update.
-
The javascript on the services_dhcpv6.php page is a work in progress. We'll need to fix that.
Can I help with this issue Databeestje?
-
@Databeestje, I believe I have found a bug caused by a change you did last week in the DHCPv6 service. I also believe to have found the solution for it. I have described it in this forum post:
http://forum.pfsense.org/index.php/topic,33955.msg187311.html#msg187311
Could you have a look at it?
-
Hello everybody,
I just reported a bug into pfSense bugtracker (http://redmine.pfsense.org/issues/1555) about DHCPv6 and "Deny unknown clients" options and there is the same bug in the v6 version but i don't know where to report it.
In line 736, you should change :
$dhcpdv6conf .= " deny unknown clients;\n";by
$dhcpdv6conf .= " deny unknown-clients;\n";By the way, i can't do failover in v6… Does anyone knows more about it ?
-
From the specifications you can assign priorities to different dhcp servers. Not sure if this works yet.
-
What about fixed IP's in IPv6??
-
What about fixed IP's in IPv6??
What about it? It is currently already possible to configure reservations for DHCPv6 leases. Works like a charm.
-
Yes….you can enable it, but cannot allocate it to interfaces asf...
-
Yes….you can enable it, but cannot allocate it to interfaces asf...
If I go to /services_dhcpv6.php at the bottom I can add static reservations by entering the DUID. The DHCPv6 server nicely hands out the same reserved static IPv6 address to my client with the registered DUID. Or don't I understand you correctly?
-
Pls show me the menu for this in the gui :)
-
Sure, no problem :) Check the attached screenshots. Are you sure you have gitsynced against the latest IPv6 github?
