HAVP and pfsense 2.0 beta5



  • Sorry for my bad English. I wanted to know if you kindly HAVP work with pfSense 2.0 beta5 because I have installed, but only part of the service manually and I always voice Antivirus server stopped.

    Thanks in advance for the answers



  • What in the Status > Services menu about HAVP ?



  • now I have this situation and havp doesn't start  :-[




  • service status




  • Antivirus: HTTP proxy (havp + clamav)




  • Antivirus: HTTP proxy (havp + clamav) - 2




  • Start update and look syslog



  • I try to update the antivirus but nothing happens and the system log is not detected any errors.
    But there is this screen of the antivirus error

    Warning: dir (/ var / db / clamav /): failed to open dir: No such file or directory in / etc / inc / pfSense-utils.inc on line 432 Fatal error: Call to a member function read () on a non-object in / etc / inc / pfSense-utils.inc on line 433
    


  • here the sys log

    Feb 12 19:35:14 	syslogd: kernel boot file is /boot/kernel/kernel
    Feb 12 19:37:04 	check_reload_status: syncing firewall
    Feb 12 19:37:08 	check_reload_status: syncing firewall
    Feb 12 19:37:14 	check_reload_status: syncing firewall
    Feb 12 19:37:14 	php: /pkg_mgr_install.php: The command 'killall -9 havp' returned exit code '1', the output was 'No matching processes were found'
    Feb 12 19:37:23 	check_reload_status: syncing firewall
    Feb 12 19:37:24 	php: /pkg_mgr_install.php: Beginning package installation for HAVP antivirus.
    Feb 12 19:37:32 	check_reload_status: syncing firewall
    Feb 12 19:37:41 	php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/havp' returned exit code '1', the output was 'Usage: /usr/local/etc/rc.d/havp [fast|force|one](start|stop|restart|rcvar|status|poll)'
    Feb 12 19:37:41 	php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/clamd.sh' returned exit code '127', the output was '/usr/local/etc/rc.d/clamd.sh: not found'
    Feb 12 19:37:50 	check_reload_status: syncing firewall
    Feb 12 19:37:51 	php: /pkg_mgr_install.php: Starting HAVP
    Feb 12 19:37:58 	check_reload_status: syncing firewall
    Feb 12 19:38:03 	check_reload_status: syncing firewall
    Feb 12 19:38:03 	check_reload_status: reloading filter
    Feb 12 19:38:10 	check_reload_status: syncing firewall
    Feb 12 19:38:13 	php: : Havp: Squid is already configured as transparent proxy. Use 'Standard' proxy mode.
    Feb 12 19:38:13 	php: : Havp: Squid is already configured as transparent proxy. Use 'Standard' proxy mode.
    Feb 12 19:39:06 	check_reload_status: syncing firewall
    Feb 12 19:39:07 	php: /pkg_edit.php: Starting HAVP
    Feb 12 19:39:14 	check_reload_status: syncing firewall
    


  • Broken installation. Need full remove and new install Havp.



  • ok thanks  ;)



  • I reinstalled havp but will not start. The log file has these lines.

    Feb 14 11:37:49 	check_reload_status: syncing firewall
    Feb 14 11:37:50 	php: /pkg_mgr_install.php: Starting HAVP
    Feb 14 11:37:51 	check_reload_status: syncing firewall
    Feb 14 11:37:52 	check_reload_status: syncing firewall
    Feb 14 11:38:13 	check_reload_status: reloading filter
    Feb 14 11:38:15 	check_reload_status: syncing firewall
    Feb 14 11:39:31 	check_reload_status: syncing firewall
    Feb 14 11:39:32 	php: /pkg_edit.php: Starting HAVP
    Feb 14 11:39:35 	check_reload_status: syncing firewall
    Feb 14 11:39:55 	check_reload_status: syncing firewall
    Feb 14 11:39:57 	check_reload_status: syncing firewall
    Feb 14 11:40:12 	kernel: pid 19838 (freshclam), uid 106 inumber 3984 on /var: filesystem full
    Feb 14 11:40:25 	kernel: pid 57042 (freshclam), uid 106, was killed: out of swap space
    Feb 14 11:40:29 	php: /antivirus.php: Antivirus: Starting file '/tmp' scanner. Log file is '/var/log/clamscan.log'. Wait 5-10 minutes.
    Feb 14 11:41:04 	php: /antivirus.php: Antivirus: Starting file '/var/db' scanner. Log file is '/var/log/clamscan.log'. Wait 5-10 minutes.
    Feb 14 11:42:15 	check_reload_status: syncing firewall
    Feb 14 11:42:16 	php: /pkg_edit.php: Starting HAVP
    Feb 14 11:42:18 	check_reload_status: syncing firewall
    Feb 14 11:44:15 	kernel: pid 38527 (freshclam), uid 106, was killed: out of swap space
    Feb 14 11:44:42 	kernel: pid 37277 (clamd), uid 0, was killed: out of swap space
    Feb 14 11:46:15 	kernel: pid 61899 (clamd), uid 0, was killed: out of swap space
    


  • Feb 14 11:40:12 kernel: pid 19838 (freshclam), uid 106 inumber 3984 on /var: filesystem full
    Feb 14 11:40:25 kernel: pid 57042 (freshclam), uid 106, was killed: out of swap space

    Free disk space and run AV update



  • thanks for your reply.
    I have a 60GB hd and then place the data on my pfSense.
    With the installation I performed the standard procedure. Maybe I should do a custom install and increase swap space?
    Below place the System Activity

    last pid: 24341;  load averages:  0.49,  0.23,  0.23  up 0+00:33:01    12:04:30
    87 processes:  2 running, 71 sleeping, 1 zombie, 13 waiting
    
    Mem: 36M Active, 35M Inact, 104M Wired, 260K Cache, 34M Buf, 60M Free
    Swap: 
    
      PID USERNAME PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
       10 root     171 ki31     0K     8K RUN     24:00 88.96% idle
    25340 root      66    0 34212K 18000K piperd   0:11  1.95% php
        0 root     -16    0     0K    48K sched    0:41  0.00% {swapper}
       11 root     -64    -     0K   104K WAIT     0:39  0.00% {irq14: ata0}
    25498 root      76    0 34212K 14900K accept   0:21  0.00% php
       11 root     -68    -     0K   104K WAIT     0:08  0.00% {irq11: vr1}
    22966 root      44    0  6572K  3132K kqread   0:07  0.00% lighttpd
       11 root     -32    -     0K   104K WAIT     0:04  0.00% {swi4: clock}
        9 root     -16    -     0K     8K psleep   0:03  0.00% pagedaemon
        3 root      -8    -     0K     8K -        0:02  0.00% g_up
       35 root      -8    -     0K     8K mdwait   0:02  0.00% md1
       13 root     -16    -     0K     8K -        0:01  0.00% yarrow
       11 root     -68    -     0K   104K WAIT     0:01  0.00% {irq10: vr0}
        4 root      -8    -     0K     8K -        0:01  0.00% g_down
    25152 root      76    0 34212K  8148K accept   0:01  0.00% php
    47788 root      76   20  3656K   884K wait     0:01  0.00% sh
    18452 root      44    0  3316K   916K select   0:01  0.00% apinger
    41653 clamav    64   20 15620K  3680K kqread   0:00  0.00% freshclam
    


  • How much memory is in the system? and no swap? (shell command # swapctl -l)

    and /var is full. How big are the file systems? (Shell command # df)



  • Now I have this version on an Alix and a 4GB CF
    pfSense-2.0-RC1-4g-i386-20110214-0324-nanobsd.img

    
    [2.0-RC1][root@pfSense.localdomain]/root(15): swapctl -l
    Device:       1024-blocks     Used:
    [2.0-RC1][root@pfSense.localdomain]/root(16): df
    Filesystem        1K-blocks   Used   Avail Capacity  Mounted on
    /dev/ufs/pfsense0   1898582 158284 1588411     9%    /
    devfs                     1      1       0   100%    /dev
    /dev/md0              39406    314   35940     1%    /tmp
    /dev/md1              59246  42420   12088    78%    /var
    /dev/ufs/cf           50527    106   46379     0%    /cf
    devfs                     1      1       0   100%    /var/dhcpd/dev
    /dev/md10             57262      6   52676     0%    /var/tmp/havpRAM
    [2.0-RC1][root@pfSense.localdomain]/root(17):
    
    


  • Package HAVP not for NanoBSD.



  • :o ok now i install a full version of pfsense on a hd and then mount it on my alix

    thanks for reply


Log in to reply