Load Balance and Squid does not work runnig in the same server

[heper]

my "how-to" can be translated in any language … it's only purpose was to return the info i got from ermal to the community ;)

[eri--]

rubic, its pfSense customized pf(4), by me. :)

This functionality can not be done with standard pf(4), at least the version that is used on FreeBSD, without too much tinkering.

[rubic]

@ermal:

rubic, its pfSense customized pf(4), by me. :)

This functionality can not be done with standard pf(4), at least the version that is used on FreeBSD, without too much tinkering.

Ok, now I see :) Thank you for your work!
translated: http://forum.pfsense.org/index.php/topic,34810.0.html

[lnaimi]

Ok the guide works with FailOver, but for LoadBalance???? Thanks

[juniorghr]

Please, where I am testing the sense pf 2.0 is required to enter some sites that require https and when I configure squid with loadbalance the gateway connection changes every time, how can I fix this?

Please help.

[Frozen_Fire]

Please help…Load balancing is ok...but squid is not functioning...please do some ups in the floating rule..
Thank you...

[heper]

@juniorghr

well you could create a dedicated gateway group with failover (different tiers) and add a seperate rule  for https traffic to use that gateway group …..

or you could enable 'sticky connections' in system  .... but i don't know if that would solve all issues

[onkeldave83]

Yes, BUT WITH THIS SOLUTION YOU CANT HAVP as parent for SQUID ;)

[farrukhndm]

I Follow the same above procedure but no success,My browser just working working and working without showing any results.
my configurations are.

My browser dosn't open any page after given settings ?????..Where I have take mistake. please guide me .


[Frozen_Fire]

@ far … your Nat ountbound should be set to "manual"

[eri--]

You need only loopback interface on squid selected.
Also on LAN the rule with a GatewayPool should not match the port 80/443 tcp which get handled by squid.

[mjtbrady]

Has anyone got failover working on 2.0RC3?  I have been trying to get this working for several days now and and have not been successful.