Em - new drivers
-
The not calculated outgoing traffic (in bytes) - this is the innovation of new em drivers? :)
Or this only in me?Name Mtu Network Address Ipkts Ierrs Idrop Ibytes Opkts Oerrs Obytes Coll Drop em0 1500 <link#2>00:1b:21:7b:3b:85 41830347 0 0 4081252314 74963569 0 480 0 330 em0 1500 <link#2>00:1b:21:7b:3b:85 43451677 0 0 4205731273 77799662 0 480 0 330</link#2></link#2>
Edit: It is more clearly
>netstat -w1 -I em0 input (em0) output packets errs idrops bytes packets errs bytes colls 1519 0 0 114862 2611 0 0 0 1471 0 0 109899 2516 0 0 0 1526 0 0 116645 2688 0 0 0 1114 0 0 89002 1660 0 0 0 1036 0 0 152215 1876 0 0 0 1282 0 0 117461 2112 0 0 0 1281 0 0 203097 2213 0 0 0 1025 0 0 94110 1705 0 0 0 1236 0 0 252131 2065 0 0 0 1195 0 0 145317 1831 0 0 0 1144 0 0 89966 1994 0 0 0 1389 0 0 107271 2338 0 0 0 1481 0 0 109337 2505 0 0 0 1380 0 0 105365 2413 0 0 0 1295 0 0 102748 2255 0 0 0 1372 0 0 106188 2367 0 0 0 1422 0 0 108580 2475 0 0 0 1413 0 0 105171 2401 0 0 0 1458 0 0 119036 2364 0 0 0 1494 0 0 112405 2562 0 0 0
-
pfSense doesn't use those counters anyhow :-)
Use:
> pfctl -vvsI -i em0 em0 Cleared: Fri Mar 4 08:07:27 2011 References: [ States: 0 Rules: 17 ] In4/Pass: [ Packets: 8608 Bytes: 917014 ] In4/Block: [ Packets: 8 Bytes: 1184 ] Out4/Pass: [ Packets: 12702 Bytes: 1373638 ] Out4/Block: [ Packets: 0 Bytes: 0 ] In6/Pass: [ Packets: 0 Bytes: 0 ] In6/Block: [ Packets: 68 Bytes: 8800 ] Out6/Pass: [ Packets: 0 Bytes: 0 ] Out6/Block: [ Packets: 0 Bytes: 0 ]
-
SNMP - not a part of pfSense? :)
>snmpwalk -v2c -c public rouner.lan if. ... IF-MIB::ifDescr.1 = STRING: nfe0 IF-MIB::ifDescr.2 = STRING: em0 IF-MIB::ifDescr.3 = STRING: ath0 ... IF-MIB::ifOutOctets.1 = Counter32: 3718527047 IF-MIB::ifOutOctets.2 = Counter32: 480 IF-MIB::ifOutOctets.3 = Counter32: 1021414678 ... IF-MIB::ifOutUcastPkts.1 = Counter32: 31584759 IF-MIB::ifOutUcastPkts.2 = Counter32: 266162797 IF-MIB::ifOutUcastPkts.3 = Counter32: 1594422
Packages is not a part of pfSense? :)
-
Ah, well I meant the rrd graphs :-)
Packages, those can be hit or miss anyhow. SNMP is a bit more worrisome.
-
-
Here is my "netstat -w1 -I em0" output.
I'm running/testing (2.0-RC1 (amd64) built on Fri Mar 4 11:03:45 EST 2011)input (em0) output packets errs idrops bytes packets errs bytes colls 10514 0 0 15837815 4820 0 266284 0 10481 0 0 15795200 4357 0 239209 0 10505 0 0 15835484 5065 0 276350 0 10491 0 0 15806946 4908 0 270616 0 10431 0 0 15692269 4287 0 233576 0 10226 0 0 15386078 4464 0 245934 0 10511 0 0 15830104 4454 0 245684 0 10517 0 0 15844869 4667 0 257179 0 10491 0 0 15819018 4836 0 266196 0 10489 0 0 15818589 4770 0 263280 0 10521 0 0 15836499 4493 0 245077 0 10530 0 0 15832568 4559 0 249921 0 10500 0 0 15834634 4714 0 258932 0 10509 0 0 15831378 4785 0 263895 0 10530 0 0 15840403 4883 0 269620 0 10502 0 0 15831157 4396 0 241035 0 10511 0 0 15806639 4228 0 231288 0 10539 0 0 15829922 4674 0 254460 0 10567 0 0 15842238 4791 0 263950 0 10526 0 0 15843342 4382 0 239865 0 10540 0 0 15840419 4765 0 264766 0
Also the dashboard is humming along fine at 126Mbit/s
-
My card does not work as it is expected.
Intel 82574L Gigabit Ethernet Controller - EXPI9301CTBLK PCI Express x1 slotem0@pci0:2:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 hdr=0x00
-
Well the new drivers seemed to work but, I ran into an other issue. (I suspect it is not driver related…)
With the latest builds (3rd / 4th of march) I could not get Multicast to be accepted.
It kept being blocked by the "default rule" even though I made an exception in my LAN rules to allow it. (gaming / xbox thread, post by databeestje)
So I was unable to get upnp to work with my Consoles, NAS and Laserprinter.I reverted back, web upload firmware, to previous images (tried 26th Feb, and 1st of March image) but the blocking by the default rule of User allowed traffic remained.
(I'm not very fluent in firewall rules, /tmp/rules.debug seemed OK to me)Today I finally re-installed a previous image from scratch, install CDrom, web: restore config.xml, to get my Consoles, NAS and Laserprinter on-line again.
-
Is there something taken on this issue or solve the problem yourself?
Really do not want to sit on the old snapshot. :'( -
Thanks for http://redmine.pfsense.org/projects/pfsense-tools/repository/revisions/9ef97a5994abb78061277f4f29d2067b7b833a9d
But this commit is not applyed for amd64 (i tested). I don't understand why.Snapshots:
pfSense-Full-Update-2.0-RC1-amd64-20110318-2213.tgz
pfSense-Full-Update-2.0-RC1-amd64-20110320-0505.tgz
Included yandex drivers.Edit:
I understood why - http://redmine.pfsense.org/projects/pfsense-tools/repository/revisions/f7a0d0d634b787fede5b54ec26c625423c12b624/diff/builder_scripts/patches.RELENG_8_1