Check_reload_status em drivers.. worked on 1.2.3
-
old card.. worked fine with exact hardware and 1.2.3.
now, I get these constantly, and interface does go up and down.Mar 5 21:19:23 pfSense kernel: em2: Watchdog timeout – resetting
Mar 5 21:19:23 pfSense kernel: em2: link state changed to DOWN
Mar 5 21:19:24 pfSense php: : Hotplug event detected for opt1 but ignoring since interface is configured with static IP (10.72.0.1)
Mar 5 21:19:27 pfSense check_reload_status: Linkup starting em2
Mar 5 21:19:27 pfSense kernel: em2: link state changed to UP
Mar 5 21:19:27 pfSense php: : Hotplug event detected for opt1 but ignoring since interface is configured with static IP -
Are you using a current snapshot, or the RC1 images?
If you are using a current snapshot, can you try the RC1 image instead? (Or vice versa)
-
booted and installed the iso and it said there was a (march 4th) update.
I needed to pull this back out and put the 1.2.3 hd back in due to all the issues.
might try again. but, so far:
1.2.3 won't upgrade (had driver/usb or boot issues with 2.0 rc1 iso)
2.0 rc1 iso won't even install (if there is an existing boot loaded on the hd.. see other posts. needed to zero out first 512 bytes of hd to get it to see the ata drive)
