Question/looking For Help Or pointer to right Location for info

hevreka

Hello All And Thanks For Reading This.

I Know I Have Seen a Help Page Somewhere About how you put a forward for LAN IP:PORT to Specific WAN IP:PORT

Here Is My Setup and My Problem:

Internet1 To Modem1 in Bridage Mode (DHCP from ISP) To Router 1 With PPPoE
Internet2 To Modem2 in Bridage Mode (DHCP from ISP) To Router 2

Router 1 IP 192.168.20.1 To IP 192.168.20.2 "WAN1" Pfsense
Router 2 IP 192.168.30.1.To IP 192.168.30.2 "WAN2" Pfsense Same Pc As Above

Now To My Problem I Want to connect to Router 1 and 2 from LAN (To Configure or Check logs)
by IP 192.168.0.1 Port 8100 (for Router 1) and IP 192.168.0.1 Port 8200 (for Router 2) on Pfsense PC

My Best And Warmest Regards
Hevreka

stephenw10

You don't say which version of pfSense you are using.
I have found this method to be very quick and easy under 1.2.3:
http://doc.pfsense.org/index.php/How_can_i_access_my_PPPoE_Modem_on_WAN

A simple method under 2.0 (and a far more complex method for 1.2.3) is listed here:
http://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall

Steve

hevreka

Thank You

That Was It What I Was Missing =)

My Best Regards
Hevreka