Http rules

[mrbogus3000]

Hello Sir's

I need help! I have configured the dual wan successfully but what i need it to do is to route all http on wan2 and all other traffic on wan1 but when I create a rule which is

dns rule

proto - tcp/upd
source - lan
port -53
destination - *
port - 53
gateway - wan 2

http rule
proto - tcp
source- lan
port -80
destination - *
port -80
gateway- wan2

I cannot access the internet anymore please help

[Mercredi]

for DNS source port - any
for http source port - any (here is your problem)

[hoba]

Sourceports are nearly always randomly chosen. You shouldn't use them in firewallrules unless you know that it is sent from a special service or device that uses fixed sourceports.

[mrbogus3000]

I have change the souce port to * but it's no good ,do I need to open additional ports because when http and dns are set to pass i cannot access the internet anymore but when I select pass on my lan rule that is set to tcp and then all *  I can access the internet fine…..Please help!!!

[sullrich]

You do NOT want a source port at all.

The rule should look like this:

TCP  LAN net  *  *  80 (HTTP)  * Allow WEB (HTTP)

[hoba]

TCP  LAN net  *  *  80 (HTTP)  WAN2 Allow WEB (HTTP)