[solved] View Auto Nat rules.
-
The auto nat rules are working very well for me except I want to assign each of the lans on the network their own external ip. I have a list of Ips available to me.
I can do it using AON but this clears off all the rules and stops things like my route to the openvpn tunnel I have, is there any way i can view these rules and copy them with a few tweaks
-
If you switch to manual the equivalent set of rules should be put into the outbound NAT ruleset. This has been improved quite a bit on 2.0, though.
-
I had already put one manual nat in there which stopped the auto nat rules from being turned on. Deleted that and switched to AON and it worked fine.
Thanks
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.