IPSEC Local Subnet to Remote Subnet
-
I have a need to connect IPSEC tunnel between two networks. One end is pFsense and other end is Cisco PIX.
Our end, pFsense is using a single host configuration. The remote end has four hosts that will be allowed to communicate with my one host. In Cisco I know I can add multiple machines to ACL. The problem here is I only see Remote subnet option. I can do a HOST to HOST IPSEC to that network no problem to 192.168.1.10, but not sure how to add the other hosts to be part of the IPSEC connection.
Example:
Local Subnet:
Type: Single Host/10.80.111.222Remote Subnet:
192.168.1.10, 192.168.1.11, 192.168.1.12, 192.168.1.13
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.