Traffic Shaper, qVoIP on Wan staying empty? (solved)
i'm running 2.0 RC1 ( 2.0-RC1 (i386) built on Thu Apr 7) on an alix board and I've lately noticed that the "qVoIP on WAN" is staying empty on my phone calls/conversations.
The floating rules were created using the wizard and the VoIP rule was adjusted to fit the source/destination as follows (see attachment). The rule was setup to "any" and with the "quick" option.
192.168.2.252 = VoIP Adapter on LAN
18.104.22.168 = ISP SIP Server
During a conversation i monitored pftop and got:
PR D SRC DEST STATE AGE EXP PKTS BYTES udp I 192.168.2.252:5060 22.214.171.124:5060 2:2 7914m 60 275K 77M udp O 192.168.2.252:5060 126.96.36.199:5060 2:2 2759m 60 97K 27M udp I 192.168.2.252:16472 188.8.131.52:19524 2:2 348 60 28995 1812K udp O 192.168.2.252:16472 184.108.40.206:19524 2:2 348 60 28995 1812K
On the queues i can see "qVoIP on LAN" getting properly filled up but "qVoIP on WAN" staying empty.
I triple checked all the rules by now, and its not an overriding problem. Does anyone have an idea or explanation?
any help appreciated! :)
ok it looks like the data is getting into the "qP2P on WAN" queue which is also the default queue but i dont see why…
yes its definitely going into the qP2P on Wan queue, just left it to idle traffic and made an test call/conversation and it got filled the moment i accepted the call!
is there any way i can trace the cause of this?
i had to add some addition floating rules for voip on wan side ( see attachment)
it works as expected now! wan traffic gets properly queued as does lan traffic! (lan did before too, i only renamed and add ports for sip/rtp only)
what i did notice was when i merged the rule "VOIP Adapter WAN" into an (In/Out) rule by using "any" it would not work!
is this a bug or a feature?
i dont know if my problem is related to this one too
the moment i updated my server to yesturday's snapshot, my son started complaining about audio latency and team viewer latency too.
any reason why this is hapening,
help really apreciated, i dont want to go back to 1.2.3, i need to practice the features in 2.0