Lusca_Surya

kaptenhook

@kaptenhook:

itu karna client_db off, coba dirubah jadi on entar lak keliatan yang akses ;D ;D ;D ;D

Dimana setnya gan?
Saya ga paham.

letaknya kira kira di
/usr/local/etc/squid
setelah masuk cari tuning.conf
client_db ada di situ

poscom

@kaptenhook:

@jundi49:

@kaptenhook:

itu karna client_db off, coba dirubah jadi on entar lak keliatan yang akses ;D ;D ;D ;D

Dimana setnya gan?
Saya ga paham.

letaknya kira kira di
/usr/local/etc/squid
setelah masuk cari tuning.conf
client_db ada di situ

yahbetul #client_db off # this needs to be on for acl maxconn to work (chudi)
,tapi klo pake yg include bukan tunning dah on default nya ( sy juga pake yg include.conf )

Number of clients accessing cache: 2 <<<<<<<<<<<< ini
Number of HTTP requests received: 611
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 21.2
Average ICP messages per minute since start: 0.0
Select loop called: 109472 times, 15.833 ms avg

jundi49

ok tq gan, udah bisa dan dah diubah jadi db on.
Terima kasih.

poscom

hanya untuk test cache hd 2tera…...

[2.0-RELEASE][admin@serverxxxx]/root(1): df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/mfid0s1a 413G 280M 379G 0% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 3.6M 46K 3.3M 1% /var/run
/dev/mfid0s1d 3.8G 76M 3.4G 2% /var/squid/log
/dev/mfid0s1e 581G 1.3G 533G 0% /cache0
/dev/mfid0s1f 775G 2.9G 710G 0% /cache1
devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev
[2.0-RELEASE][admin@serverxxxx]/root(2): tail -f /var/squid/log/cache.log
2012/04/09 15:03:54| 0 Objects expired.
2012/04/09 15:03:54| 0 Objects cancelled.
2012/04/09 15:03:54| 0 Duplicate URLs purged.
2012/04/09 15:03:54| 17784 Swapfile clashes avoided.
2012/04/09 15:03:54| Took 2.2 seconds (68089.6 objects/sec).
2012/04/09 15:03:54| Beginning Validation Procedure
2012/04/09 15:03:54| Completed Validation Procedure
2012/04/09 15:03:54| Validated 150134 Entries
2012/04/09 15:03:54| store_swap_size = 4230780k
2012/04/09 15:03:54| storeLateRelease: released 0 objects

minimum_object_size 0 KB
maximum_object_size 256 MB
offline_mode off
cache_swap_low 96
cache_swap_high 98

No redirector configured

Setup some default acls

acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 82 3128 1025-65535
acl sslports port 443 563 82
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl partialcontent_req req_header Range .*
acl mallware url_regex "/usr/local/etc/squid/mallware.url"
acl conficker url_regex "/usr/local/etc/squid/conficker.url"

#acl dynamic urlpath_regex cgi-bin ?
include /usr/local/etc/squid/include.conf
acl allowed_subnets src 10.8.8.0/24 10.10.1.0/24 10.10.2.0/24 10.10.4.0/24 10.10.10.0/28 192.168.1.0/24
#cache deny dynamic
http_access allow manager localhost

16gb mem
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz

baru gunting pita
server louncing dilepas beberapa jam (baru masuk warnet2 kecil)

Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time: Mon, 09 Apr 2012 08:11:23 GMT
Current Time: Mon, 09 Apr 2012 09:16:28 GMT
Connection information for squid:
Number of clients accessing cache: 48
Number of HTTP requests received: 358122
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 5501.6
Average ICP messages per minute since start: 0.0
Select loop called: 9005064 times, 0.434 ms avg
Cache information for squid:
Request Hit Ratios: 5min: 19.6%, 60min: 24.9%
Byte Hit Ratios: 5min: 30.4%, 60min: 26.5%
Request Memory Hit Ratios: 5min: 2.5%, 60min: 3.0%
Request Disk Hit Ratios: 5min: 80.7%, 60min: 72.8%
Storage Swap size: 7867492 KB
Storage Mem size: 12672 KB
Mean Object Size: 28.11 KB
Requests given to unlinkd: 0
Median Service Times (seconds) 5 min 60 min:
HTTP Requests (All): 0.07825 0.07014
Cache Misses: 0.20843 0.22004
Cache Hits: 0.00286 0.00286
Near Hits: 0.07014 0.01648
Not-Modified Replies: 0.00091 0.00091
DNS Lookups: 0.03223 0.00779
ICP Queries: 0.00000 0.00000
+++++++++++++++++++++++++++++++++++++++++++++++

Uptime : 03:05 >>>>>>>>>> jam yang lalu

Filesystem Size Used Avail Capacity Mounted on
/dev/mfid0s1a 413G 280M 379G 0% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 3.6M 46K 3.3M 1% /var/run
/dev/mfid0s1d 3.8G 359M 3.1G 10% /var/squid/log
/dev/mfid0s1e 581G 4.7G 530G 1% /cache0
/dev/mfid0s1f 775G 12G 701G 2% /cache1 <<<<<<<<<<<<< 03:05 beberapa ip subnet dibuka
devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev

++++++++++++++++++++++++++++++
trafic hit ga bisa liat karena yg didepan mkt, hit interface di mkt dan liat puty :)

lusca.png_thumb

kaptenhook

wah wah ngegunting pita mulu nih bung poscom, kapan nih ada pembagian pita sama kita kita wakakakak…..sukses ya bung selamat

poscom

pak kapten adalah salah satu guru sy yg baik, trims tar dikirim pitanya
coba2 instal isp orang wakakak…
sedih jg ngeliat agresifnya lusca di puty takutnya umurnya pendek
dari pertama naek pagi sampe malam tadi dah 30gb lebih yg file berat
c area isp (tangerang, serang, cilegon, pandeglang, rangkas dan sekitarnya)

karena masih test.. racikannya jd pitanya belum full :) wait

joyojogja

Maaf para master. saya kok dari dulu kok yang bagian ini gak nambah nambah yaa??
Number of clients accessing cache: 48
padahl udah di ganti ''on''

HTTP/1.0 200 OK
Server: Lusca/LUSCA r14850 patched: chudy r14
Date: Sun, 06 May 2012 16:01:31 GMT
Content-Type: text/plain
Expires: Sun, 06 May 2012 16:01:31 GMT
X-Cache: MISS from localhost
Connection: close

Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time: Sun, 06 May 2012 15:53:35 GMT
Current Time: Sun, 06 May 2012 16:01:31 GMT
Connection information for squid:
Number of clients accessing cache: 3
Number of HTTP requests received: 1717
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 216.4
Average ICP messages per minute since start: 0.0
Select loop called: 100435 times, 4.741 ms avg
Cache information for squid:
Request Hit Ratios: 5min: 10.9%, 60min: 10.5%
Byte Hit Ratios: 5min: 37.1%, 60min: 31.4%
Request Memory Hit Ratios: 5min: 2.9%, 60min: 2.6%
Request Disk Hit Ratios: 5min: 68.3%, 60min: 71.1%
Storage Swap size: 12779666 KB
Storage Mem size: 1780 KB
Mean Object Size: 28.91 KB
Requests given to unlinkd: 0
Median Service Times (seconds) 5 min 60 min:
HTTP Requests (All): 0.14252 0.15888
Cache Misses: 0.16775 0.18699
Cache Hits: 0.00919 0.01309
Near Hits: 0.12783 0.12783
Not-Modified Replies: 0.00179 0.00179
DNS Lookups: 0.00669 0.00779
ICP Queries: 0.00000 0.00000
Resource usage for squid:
UP Time: 476.130 seconds
CPU Time: 26.590 seconds
CPU Usage: 5.58%
CPU Usage, 5 minute avg: 4.63%
CPU Usage, 60 minute avg: 5.72%
Process Data Segment Size via sbrk(): 0 KB
Maximum Resident Size: 83416 KB
Page faults with physical i/o: 0
Memory accounted for:
Total accounted: 47750 KB
memPoolAlloc calls: 2095497
memPoolFree calls: 1200063
File descriptor usage for squid:
Maximum number of file descriptors: 58982
Largest file desc currently in use: 186
Number of file desc currently in use: 167
Files queued for open: 0
Available number of file descriptors: 58815
Reserved number of file descriptors: 100
Store Disk files open: 1
IO loop method: kqueue
Internal Data Structures:
442063 StoreEntries
446 StoreEntries with MemObjects
444 Hot Object Cache Items
442036 on-disk objects

Mohon pencerahannya. trimakasih

poscom

Request Disk Hit Ratios: 5min: 68.3%, 60min: 71.1% dah mantep tuh

mestinya nambah dong clients accessing cachenya

daunlangka

om poscom emang top sama lusca suryanya ;D semoga di turunkan lagi jurus2 rahasianya biar nubi yg sau ini makin cerah ::)

vhantrenk

@poscom:

Device Mountpoint FStype Options Dump Pass#

/dev/da0s1a / ufs rw 1 1
/dev/da0s1b none swap sw 0 0
/dev/da0s1d /var/squid/log ufs rw,noatime 2 2
/dev/da1s1a /cache1 ufs rw,noatime 2 2
/dev/ad4s1a /cache2 ufs rw,noatime 2 2
/dev/ad6s1a /cache3 ufs rw,noatime 2 2
/dev/ad8s1a /cache4 ufs rw,noatime 2 2

cache kecil, Lusca surya baru naek
[2.0-RC1][admin@proxy.xxxxxx.net]/root(1): df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/da0s1a 117G 262M 107G 0% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 3.6M 46K 3.3M 1% /var/run
/dev/da0s1d 7.7G 37M 7.1G 1% /var/squid/log
/dev/da1s1a 122G 2.0G 110G 2% /cache1
/dev/ad4s1a 451G 4.5G 411G 1% /cache2
/dev/ad6s1a 451G 769M 414G 0% /cache3
/dev/ad8s1a 451G 438M 415G 0% /cache4
devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev

$ squidclient -p 80 mgr:info
HTTP/1.1 200 OK
Server: Lusca
Date: Sat, 07 May 2011 14:56:45 GMT
Content-Type: text/plain
Expires: Sat, 07 May 2011 14:56:45 GMT
X-Cache: MISS from sorrow_xxxxxxx
Transfer-Encoding: chunked
Via: 1.0 sorrow_xxxxxxx:3128 (Lusca)
Connection: close

853
Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time: Sat, 07 May 2011 08:25:21 GMT
Current Time: Sat, 07 May 2011 14:56:45 GMT
Connection information for squid:
Number of clients accessing cache: 7 ==> artinnya apa?
Number of HTTP requests received: 12188 ==> artinnya apa?
Number of ICP messages received: 404 ==> artinnya apa?
Number of ICP messages sent: 404 |
Number of queued ICP replies: 0 |
Request failure ratio: 0.00 |
Average HTTP requests per minute since start: 31.1 |
Average ICP messages per minute since start: 2.1 |
Select loop called: 872120 times, 26.927 ms avg |
Cache information for squid:
Request Hit Ratios: 5min: 9.3%, 60min: 14.3% |
Byte Hit Ratios: 5min: 7.0%, 60min: 30.1% |
Request Memory Hit Ratios: 5min: 0.0%, 60min: 0.0% |
Request Disk Hit Ratios: 5min: 0.0%, 60min: 0.0%
Storage Swap size: 7890680 KB |
Storage Mem size: 15132 KB
Mean Object Size: 26.86 KB ==> artinnya apa?

dir_conf digunakan 1/2 dr hardisk, dicoba untuk menghadapi serangan >100 user dgn 1mb spidol (belum teruji, user baru naek 30an) ==>to be continue

om tolong jelasin cara bacannya donk ane ga ngerti itu, mohon om jelasin perbaris biar saya ngerti bacannya

vhantrenk

TOTALS
ICP : 0 Queries, 0 Hits ( 0%)
HTTP: 280896 Requests, 118308 Hits ( 42%)

??? tu dapet TOTALS dari mana om? atau pake perintah ap?? kok saya ga da ya

nyari di mbah google ada yang bilang patokan bagusnnya hit dari tu info, di putty saya kasi perintah squidclient -P 80 mgr:squid_client ga muncul :o

squid baru jalan 2 hari wkwkwkwk…........... ;D :D

untitled.JPG_thumb

kaptenhook

squidclient -p 80 mgr:client_list

detrackmx

nyumbang ah…......

Untitled-1.jpg_thumb

serangku

Ayo semangat …

naek tingkat maenan proxyna
maen2nya ke ICP hit ...

TOTALS
ICP : 417021 Queries, 125730 Hits ( 30%)
HTTP: 417024 Requests, 143050 Hits ( 34%)

bukti bahwa PFSense BISA …
bisa dipaksa lebih ngebut
bisa dipaksa lebih kerja rodi
bisa dibanting klau kesel gak bisa2 ;D

vhantrenk

@kaptenhook:

squidclient -p 80 mgr:client_list

;D thanks om dah bisa ;D , ternyata kebolak denk perintahnnya

ni saya coba baru OL komp billing doank…ntar mau tes klu lg full sama 6 client ;D ;D
thanks para master ;) :D

bravo PFSI

![total hit.JPG](/public/imported_attachments/1/total hit.JPG)
![total hit.JPG_thumb](/public/imported_attachments/1/total hit.JPG_thumb)

agismaniax

link donlot lusca-surya dimana ya? bedanya apa dengan lusca-cache dari chuddy fernandez? ???

kaptenhook

@agismaniax:

link donlot lusca-surya dimana ya? bedanya apa dengan lusca-cache dari chuddy fernandez? ???

he…he...he.....wakakakakakakakakkkkkkk :o :o :o :o :o :o :o :o

serangku

;D

@agismaniax
maafin om dan kawan2 yah …

tidak ada itu yg namanya lusca surya
coba deh baca dari page 1
khan ketahuan tuh jadinya ...

;D

poscom

lg test…

include /usr/local/etc/squid/dir.conf
minimum_object_size 0 KB
maximum_object_size 192 MB

acl partialcontent_req req_header Range .*
#acl dynamic urlpath_regex cgi-bin ?
include /usr/local/etc/squid/tunning.conf
acl allowed_subnets src 1xx.xxx.xxx.0/24

$ squidclient -p 80 mgr:info
HTTP/1.1 200 OK
Server: Lusca
Date: Tue, 02 Oct 2012 05:00:01 GMT
Content-Type: text/plain
Expires: Tue, 02 Oct 2012 05:00:01 GMT
X-Cache: MISS from xxxxxxxx
Transfer-Encoding: chunked
Connection: close

Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time: Tue, 25 Sep 2012 11:01:38 GMT
Current Time: Tue, 02 Oct 2012 05:00:01 GMT
Connection information for squid:
Number of clients accessing cache: 81
Number of HTTP requests received: 9892589
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 1017.9
Average ICP messages per minute since start: 0.0
Select loop called: 107563898 times, 5.421 ms avg
Cache information for squid:
Request Hit Ratios: 5min: 96.5%, 60min: 95.4%
Byte Hit Ratios: 5min: 34.8%, 60min: 30.9%
Request Memory Hit Ratios: 5min: 0.1%, 60min: 0.2%
Request Disk Hit Ratios: 5min: 99.4%, 60min: 99.2%
Storage Swap size: 27064602 KB
Storage Mem size: 49016 KB
Mean Object Size: 47.00 KB

cpu biasa Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2.0.1-RELEASE (i386)

poscom

inspirasi tunning.conf
http://forum.pfsense.org/index.php/topic,29019.0.html

2012/12/13 07:39:31| 0 Duplicate URLs purged.
2012/12/13 07:39:31| 0 Swapfile clashes avoided.
2012/12/13 07:39:31| Took 0.3 seconds ( 0.0 objects/sec).
2012/12/13 07:39:31| Beginning Validation Procedure
2012/12/13 07:39:31| Completed Validation Procedure
2012/12/13 07:39:31| Validated 0 Entries
2012/12/13 07:39:31| store_swap_size = 0k
2012/12/13 07:39:32| storeLateRelease: released 0 objects

squid.conf:
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl partialcontent_req req_header Range .*
#acl dynamic urlpath_regex cgi-bin ?

#include /usr/local/etc/squid/include.conf
include /usr/local/etc/squid/sorrow.conf
acl allowed_subnets src 1x.xx.xx.0/24 1x.1x.xx.0/26
acl blacklist dstdom_regex -i "/var/squid/acl/blacklist.acl"
#cache deny dynamic
http_access allow manager localhost

kamu dapat custom apa saja video dll seperti gambar dibawah ini

sorrowconf.jpg_thumb