ADSL with 6 extra IP Addresses.

[Vk2hmc]

Hi All, newbie guy here, 1st post, hope I am in the right place!

I have searched around I can't seem to find the definitive answer to my question so here goes!

I have a ADSL connection with an extra 6 IP addresses.

They are:
110.xxx.xxx.xxx/32 Static PPPOE IP.
60.xxx.xxx.xxx/29 6 extra IP address.

Now I am going from an IOS Cisco router to hopefully pfSense (I love it so far in the test LAB!)
In Cisco for the addresses I want to port forward I would just create a loopback address and 'ip nat outside' it.
To give you an idea this is the way I’d do it on a Cisco:

int loop 4
ip address 60.xxx.xxx.1 255.255.255.255
ip nat outside

and then use 'ip nat inside' for the port forwarding. Eg port 80 on the outside of this address goes to a specific host’s port 80 on the inside:
ip nat inside source static tcp 192.168.0.1 80 60.xxx.xxx.1 80 extendable

and for the outgoing traffic:

ip nat inside source route-map static-4 interface Loopback4 overload
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
access-list 101 deny  ip any any
route-map static-4 permit 10
match ip address 101

The nat side of pfSense is pretty much a no brainer, but how do I handle the 6 extra IP addresses?

Or am I looking at this from the wrong angle because I know the Cisco way of doing things?

Many thanks,
mark
???

[Vk2hmc]

Is it VIP.other?

[Vk2hmc]

For me, its VIP.IP-Alias.  :)

Thanks all for your help!