Error(s) loading the rules // after yesterdays update // 2.0-RC2 (i386) // 26.05



  • After yesterdays update we get the following error:

    There were error(s) loading the rules: /tmp/rules.debug:8: syntax error/tmp/rules.debug:37: macro ‘’ not defined /tmp/rules.debug:37: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [8]: = “{ }” …

    Here are the 2 lines:

    Line 8:
    = “{  }”

    Line 37:
    scrub in on $ all    fragment reassemble


    Does anyone have any idea, please?  :’(

    Regards,
    Chris



  • Upgrade to a new one.
    Just unlucky and got a snapshot with some wrong code that was committed and fixed after.



  • Hi,

    I’ve got the exact same problem.
    Just did an upgrade 2 hours ago to the latest snapshot (i386,full).

    scrub in on $WAN all    fragment reassemble
    scrub in on $LAN all    fragment reassemble
    scrub in on $AON all    fragment reassemble
    scrub in on $ all    fragment reassemble

    #System aliases

    loopback = "{ lo0 }"
    WAN = "{ pppoe0 }"
    LAN = "{ em0 }"
    AON = “{ em1 }”
    = "{  }"
    OpenVPN = “{ openvpn }”

    I then reverted back snapshot by snapshot and found the latest one that works for me is 20110524-1226. The problem starts with 20110524-1717 and isn’t fixed by the snapshot which was the latest one 2 hours ago (20110527-0112)


  • Developer Netgate Administrator

    When that file is correct, what shows up on that line?



  • loopback = "{ lo0 }"
    WAN = "{ pppoe0 }"
    LAN = "{ em0 }"
    AON = "{ em1 }"
    OpenVPN = “{ openvpn }”

    scrub in on $WAN all    fragment reassemble
    scrub in on $LAN all    fragment reassemble
    scrub in on $AON all    fragment reassemble

    so… nothing 😉


  • Developer Netgate Administrator

    If someone is still getting this, we’ll need to see the output of this then:

    
    global $FilterIflist;
    include "filter.inc";
    include "shaper.inc";
    filter_generate_optcfg_array();
    var_dump($FilterIflist);
    

    You can paste that into the PHP execute box under Diagnostics > Command.

    Somehow an empty entry must be sneaking in there, would be nice to know what it is in order to track it down.


  • Developer Netgate Administrator

    It would also help to know if you have any of the following enabled: PPTP server, L2TP server, PPPoE server, or IPsec.



  • Here it is:

    array(5) {
      ["wan"]=>
      array(14) {
        ["if"]=>
        string(6) "pppoe0"
        ["ip"]=>
        string(13) "[PubIP_ofWAN]"
        ["type"]=>
        string(5) "pppoe"
        ["sn"]=>
        int(32)
        ["mtu"]=>
        string(4) "1492"
        ["mss"]=>
        string(0) ""
        ["descr"]=>
        string(3) "WAN"
        ["sa"]=>
        string(13) "[PubIP_ofWAN]"
        ["nonat"]=>
        NULL
        ["alias-address"]=>
        string(0) ""
        ["alias-subnet"]=>
        string(2) "32"
        ["gateway"]=>
        NULL
        ["spoofcheck"]=>
        string(3) "yes"
        ["bridge"]=>
        NULL
      }
      ["lan"]=>
      array(13) {
        ["if"]=>
        string(3) "em0"
        ["ip"]=>
        string(11) "192.168.1.1"
        ["sn"]=>
        int(24)
        ["mtu"]=>
        int(1500)
        ["mss"]=>
        string(0) ""
        ["descr"]=>
        string(3) "LAN"
        ["sa"]=>
        string(11) "192.168.1.0"
        ["nonat"]=>
        NULL
        ["alias-address"]=>
        NULL
        ["alias-subnet"]=>
        NULL
        ["gateway"]=>
        NULL
        ["spoofcheck"]=>
        string(3) "yes"
        ["bridge"]=>
        NULL
      }
      ["opt1"]=>
      array(13) {
        ["if"]=>
        string(3) "em1"
        ["ip"]=>
        string(14) "[PubIP_ofOpt1]"
        ["sn"]=>
        int(30)
        ["mtu"]=>
        int(1500)
        ["mss"]=>
        string(0) ""
        ["descr"]=>
        string(3) "AON"
        ["sa"]=>
        string(14) "[IPofNETAddressofOpt1]"
        ["nonat"]=>
        NULL
        ["alias-address"]=>
        NULL
        ["alias-subnet"]=>
        NULL
        ["gateway"]=>
        string(5) "AONGW"
        ["spoofcheck"]=>
        string(3) "yes"
        ["bridge"]=>
        NULL
      }
      ["pppoe"]=>
      array(0) {
      }
      ["openvpn"]=>
      array(4) {
        ["if"]=>
        string(7) "openvpn"
        ["descr"]=>
        string(7) "OpenVPN"
        ["type"]=>
        string(4) "none"
        ["virtual"]=>
        bool(true)
      }
    }
    
    

    I have an ipsec tunnel configured, but it’s inactive (enable ipsec is not checked)


  • Developer Netgate Administrator

    Looks like you have a pppoe server entry that’s empty.

    I added some protections against that just now. Should be fixed in the next snapshot, or you can gitsync now and pull in the change

    https://github.com/bsdperimeter/pfsense/compare/a1b86994a0…f40a03a45c



  • Very strange… never set one up.

    I’ll gitsync and report back

    thank you very much 🙂



  • GREAT!
    Your commit did it 😉

    Thank you very much!


  • Developer Netgate Administrator

    new snap is building now that has those commits in it, so it should be OK once it uploads later this evening.



  • @jimp:

    new snap is building now that has those commits in it, so it should be OK once it uploads later this evening.

    Awesome, thanks!
    This issue creeped up on me Monday’s daily build.  Decided to come post about it today. Been trying new dailies all week waiting for a fix. Each time after a rule change, manually editing out the empty or erred rules in /tmp/rules.debug
    and reloading the rules from the shell.

    pfctl -f /tmp/rules.debug
    

Locked
 

© Copyright 2002 - 2018 Rubicon Communications, LLC | Privacy Policy