3 gateways please HELP



  • I have 3 links to ISP and I wont to do outgoing load balancing.

    It look

    gw-isp1                 static IP1
    ISP1 –--------------- router-----------------
            dinamic IP1                                    -
                                                                   -
                                                                    -
            gw-isp2                 static IP2                -
    ISP2------------------router------------------------ pfsense  <-> load balanced traffic ----------- router (access control) <-> users (static IPs)
           dinamic IP2                                          -
                                                                     -
                                                                    -
            gw-isp3                  static IP3             -
    ISP3------------------router--------------------
            dinamic IP3

    Can pfsense do this and how  ???

    Please write an example

    Thanks in advance



  • You need static IPs on WAN or at least static gateways. You can fake that with simple gatewayrouters in front of the pfsenses wans (like pppoe-modem-routers if the connection is pppoe). Search the forum, this has been discussed before and there are even examples for such a configuration somewhere (like here http://forum.pfsense.org/index.php?topic=226.0 ). For additional help in setting this up check this article in the wiki: http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing



  • @hoba:

    You need static IPs on WAN or at least static gateways. You can fake that with simple gatewayrouters in front of the pfsenses wans (like pppoe-modem-routers if the connection is pppoe). Search the forum, this has been discussed before and there are even examples for such a configuration somewhere (like here http://forum.pfsense.org/index.php?topic=226.0 ). For additional help in setting this up check this article in the wiki: http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing

    I think that I already do that with routers (mikrotik) in front of the pfsense  ??? Did I ???
    I have static GWs (routers IPs)

    My config is

    ISP_1–----router_1 (static IP_1 192.168.0.1/24)---------+
    ISP_2------router_2 (static IP_2 192.168.2.1/24)--------pfsense -----router_4 (access controler)----users
    ISP_3------router_3 (static IP_3 192.168.3.1/24)---------+

    pfsense config

    LAN - 192.168.1.1/24
    WAN_1 (connected to router_1) - IP 192.168.0.2/24 static  GW=ROUTER_1 (IP address)
    WAN_2 (connected to router_2) - IP 192.168.2.2/24 static  GW=ROUTER_2 (IP address)
    WAN_3 (connected to router_3) - IP 192.168.3.2/24 static  GW=ROUTER_3 (IP address)

    Is this config ok for this scenario ???

    If is not can someone tell me where I go wrong ???



  • All OK NOW  ;D

    Mistake was in load balancer pools.

    Regards



  • Nice! And sorry that I didn't catch all the details from the asciiart  ::)


Locked