3 gateways please HELP
-
I have 3 links to ISP and I wont to do outgoing load balancing.
It look
gw-isp1 static IP1
ISP1 –--------------- router-----------------
dinamic IP1 -
-
-
gw-isp2 static IP2 -
ISP2------------------router------------------------ pfsense <-> load balanced traffic ----------- router (access control) <-> users (static IPs)
dinamic IP2 -
-
-
gw-isp3 static IP3 -
ISP3------------------router--------------------
dinamic IP3Can pfsense do this and how ???
Please write an example
Thanks in advance
-
You need static IPs on WAN or at least static gateways. You can fake that with simple gatewayrouters in front of the pfsenses wans (like pppoe-modem-routers if the connection is pppoe). Search the forum, this has been discussed before and there are even examples for such a configuration somewhere (like here http://forum.pfsense.org/index.php?topic=226.0 ). For additional help in setting this up check this article in the wiki: http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing
-
You need static IPs on WAN or at least static gateways. You can fake that with simple gatewayrouters in front of the pfsenses wans (like pppoe-modem-routers if the connection is pppoe). Search the forum, this has been discussed before and there are even examples for such a configuration somewhere (like here http://forum.pfsense.org/index.php?topic=226.0 ). For additional help in setting this up check this article in the wiki: http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing
I think that I already do that with routers (mikrotik) in front of the pfsense ??? Did I ???
I have static GWs (routers IP
s)My config is
ISP_1–----router_1 (static IP_1 192.168.0.1/24)---------+
ISP_2------router_2 (static IP_2 192.168.2.1/24)--------pfsense -----router_4 (access controler)----users
ISP_3------router_3 (static IP_3 192.168.3.1/24)---------+pfsense config
LAN - 192.168.1.1/24
WAN_1 (connected to router_1) - IP 192.168.0.2/24 static GW=ROUTER_1 (IP address)
WAN_2 (connected to router_2) - IP 192.168.2.2/24 static GW=ROUTER_2 (IP address)
WAN_3 (connected to router_3) - IP 192.168.3.2/24 static GW=ROUTER_3 (IP address)Is this config ok for this scenario ???
If is not can someone tell me where I go wrong ???
-
All OK NOW ;D
Mistake was in load balancer pools.
Regards
-
Nice! And sorry that I didn't catch all the details from the asciiart ::)