Snort Won't Start After Upgrade
-
At my x64 2.0 RC3 its working too, including block ofenders.
I'm just saw a delay when I press the "x" gif to start snort. The daemon starts but gui stays waiting…(not a big deal.)
Thanks again for the fix.
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
-
Hi,
now i have reinstalled the snort package i386 package, deltet the configs and reconfig anything for snort. Choose the snort_p2p, snort_scan and snort_wb-client categorie. Switch the preprocessors on and startet the sensor.
Starting skype, portscanner and any web activitie. But snort doesn find anything and didn´t report anything unter the "Alert" page.
Whats wrong? Does it now run on other i386 machines? I´m running pfsense as a virtual machine under kvm. Because there are no virtio drivers i have choosen the rtl8139 network interfaces.
Regards,
Valle
-
yes during integration of Spoink i made it IPv6 capable so if an alert for an ipv6 address is triggered it will be entered on the table of pf(4) to be blocked.
As for a IPv6 capable GUI for snort, for now i do not have any plans.As for the portscan it looks a bit different because snort 2.9 does it a little more differently to give more control apparently but that needs still more work to be integrated in the GUI.
As to why snort is detecting IPv6 its just a byproduct of how snort itself works in IPS mode. This would not have been possible in inline mode though :)
Again, thank you for your testing and help.
i have no plans and never even used the snort widget.
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
It has nothing to do with snort config. Its just looks like the widget is way out dated.
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
It has nothing to do with snort config. Its just looks like the widget is way out dated.
You should use SHORT alert descriptions to get the widget working with pfsense 1.2.3
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
It has nothing to do with snort config. Its just looks like the widget is way out dated.
You should use SHORT alert descriptions to get the widget working with pfsense 1.2.3
Thats not the case in 2.0
-
@NightHawk007 I did a firmware update for other reasons, nothing to do with snort… probably shouldn't had mention it.. The Snort package has had its binary updated to a more recent version from Snort. A side effect it seems is that port scanning detecting isn't working. From my current testing, any attack that matches a rule is being detected.
I did a test after a snort reinstall and did a port scan and seem to be work fine now :) :)
Thank You
-
I am running i386 2.0-RC3. Is it safe now to update snort?
I just want to make sure everything is ok before updating as my box is under production env.
Thanks You!
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
It has nothing to do with snort config. Its just looks like the widget is way out dated.
You should use SHORT alert descriptions to get the widget working with pfsense 1.2.3
Funny… after a re install is started working.
-
Hi Ermal:
Just a quick post to say thank-you for the hard work you in getting Snort working again. Everything appears to be working fine for me now on the i386 version of pfSense 2.0-RC3 running Snort 2.9.0.5. The rules are updating now to the correct version, and all the rules I enable function for me.
I finally did a complete uninstall of Snort and did not save my settings. I then installed Snort fresh and typed my settings back in. During all of this I also found one self-inflicted wound that may have been part of my difficulties with Snort sporadically starting depending on which rules were selected. I had altered the Memory Performance setting and changed it away from AC-BNFA. That was causing Snort to sporadically run out of memory. Once I realized that and restored the setting to the default of AC-BNFA, things became much more stable… ;D
-
Looks like SNORT on AMD64 is getting close. I had SNORT working on an uninstall and reinstall.
I just upgraded from the Aug 30th snap to the latest snap today (sept 6th) and it broke again.
Here's the output:
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Filename: /usr/local/etc/snort/snort_4256_em0/unicode.map
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Filename: /usr/local/etc/snort/snort_4256_em0/unicode.map
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Codepage: 1252
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Codepage: 1252
Sep 6 22:55:06 snort[1686]: Max Gzip Memory: 838860
Sep 6 22:55:06 snort[1686]: Max Gzip Memory: 838860
Sep 6 22:55:06 snort[1686]: Max Gzip Sessions: 191
Sep 6 22:55:06 snort[1686]: Max Gzip Sessions: 191
Sep 6 22:55:06 snort[1686]: Gzip Compress Depth: 1460
Sep 6 22:55:06 snort[1686]: Gzip Compress Depth: 1460
Sep 6 22:55:06 snort[1686]: Gzip Decompress Depth: 2920
Sep 6 22:55:06 snort[1686]: Gzip Decompress Depth: 2920
Sep 6 22:55:06 snort[1686]: FATAL ERROR: /usr/local/etc/snort/snort_4256_em0/snort.conf(168) => Invalid argument to 'flow_depth'.
Sep 6 22:55:06 snort[1686]: FATAL ERROR: /usr/local/etc/snort/snort_4256_em0/snort.conf(168) => Invalid argument to 'flow_depth'.
Sep 6 22:55:06 SnortStartup[1948]: Interface Rule START for 0_4256_em0…Ideas?
Thanks,
-th3r3isnospoon
-
Looks like SNORT on AMD64 is getting close. I had SNORT working on an uninstall and reinstall.
I just upgraded from the Aug 30th snap to the latest snap today (sept 6th) and it broke again.
Here's the output:
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Filename: /usr/local/etc/snort/snort_4256_em0/unicode.map
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Filename: /usr/local/etc/snort/snort_4256_em0/unicode.map
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Codepage: 1252
Sep 6 22:55:06 snort[1686]: IIS Unicode Map Codepage: 1252
Sep 6 22:55:06 snort[1686]: Max Gzip Memory: 838860
Sep 6 22:55:06 snort[1686]: Max Gzip Memory: 838860
Sep 6 22:55:06 snort[1686]: Max Gzip Sessions: 191
Sep 6 22:55:06 snort[1686]: Max Gzip Sessions: 191
Sep 6 22:55:06 snort[1686]: Gzip Compress Depth: 1460
Sep 6 22:55:06 snort[1686]: Gzip Compress Depth: 1460
Sep 6 22:55:06 snort[1686]: Gzip Decompress Depth: 2920
Sep 6 22:55:06 snort[1686]: Gzip Decompress Depth: 2920
Sep 6 22:55:06 snort[1686]: FATAL ERROR: /usr/local/etc/snort/snort_4256_em0/snort.conf(168) => Invalid argument to 'flow_depth'.
Sep 6 22:55:06 snort[1686]: FATAL ERROR: /usr/local/etc/snort/snort_4256_em0/snort.conf(168) => Invalid argument to 'flow_depth'.
Sep 6 22:55:06 SnortStartup[1948]: Interface Rule START for 0_4256_em0…Ideas?
Thanks,
-th3r3isnospoon
Nevermind….typo ! I had a (-) instead of a (0) :-[
Sorry!
Thanks!
-th3r3isnospoon
-
My only issue now is that SNORT will not start on its own after a reboot of the firewall. I'll have to poke around some more :)
-th3r3isnospoon
-
@ermal:
i have no plans and never even used the snort widget.
ermal,
The problem is not the widget. The problem is that your latest update broke the ability to switch from full logging to short logging.
Can you please look in to it since is not the widget but the option in snort it self.Thank you very much!
-
From what i have checked the snort config is correct.
Investigation where it breaks is up to you for now.My target was to make snort run more fixes will have to wait someone backing it up or me having the time for it:)
-
Not sure if this is a new topic, but I'll ask here and move it if needed. I'm noticing that while Snort is now working, the Snort Alert module on the Dashboard is not. Truthfully, I've never had this module work yet so it could just be something in how I've setup Snort. But, I'm wondering if anyone else has the same issue?
It has nothing to do with snort config. Its just looks like the widget is way out dated.
You should use SHORT alert descriptions to get the widget working with pfsense 1.2.3
Funny… after a re install is started working.
Great, did you CLEAR the log after you changed from FULL to SHORT before? A reinstall will automaticly clear the Snort log.
-
Hi Ermal:
Just a quick post to say thank-you for the hard work you in getting Snort working again. Everything appears to be working fine for me now on the i386 version of pfSense 2.0-RC3 running Snort 2.9.0.5. The rules are updating now to the correct version, and all the rules I enable function for me.
I finally did a complete uninstall of Snort and did not save my settings. I then installed Snort fresh and typed my settings back in. During all of this I also found one self-inflicted wound that may have been part of my difficulties with Snort sporadically starting depending on which rules were selected. I had altered the Memory Performance setting and changed it away from AC-BNFA. That was causing Snort to sporadically run out of memory. Once I realized that and restored the setting to the default of AC-BNFA, things became much more stable… ;D
I was having non-stop problems of snort stopping and or the widget issue. I have two systems both high end with 4gig of memeory running a carp setup but with the latest update snort just kept stopping and or refusing to start after a reboot. I changed the memory setting from ac-std to the default ac-bnfa and the problems all stopped. So what changed to cause this?
-
Great, did you CLEAR the log after you changed from FULL to SHORT before? A reinstall will automaticly clear the Snort log.
I did. The issue now is that wen I looked at the log files in terminal I can see that is logging in full and not short even though the setting is set in short in the gui. This all started happening when I updated to the latest snort.
-
As far as I can see, snort is now fully working again.
I am running 2.0-RC3 amd64. Snort has been working, but wasn't able to block hosts, up until and including the Sept. 2nd pfsense update.
I just installed 2.0-RC3 (amd64) built on Tue Sep 6 22:44:22 EDT 2011 and toggled the "Block offenders" checkbox off (-> Save button) and on (-> Save button) and restarted Snort, and I am now receiving proper entries in the "Blocked Hosts" list.A huge Thank You to the maintainers!
