Dell R210II with 2.0 RC2



  • Hi All,

    I just got a R210II today and I installed pfSense 2.0-RC2 (amd64 built on Fri Jun 10 01:14:37 EDT 2011 ) on it without any problems at all. I used the memstick Version - works like a charm.

    So I would like to share my experience.

    Quick Hardware Specs:

    Intel Xeon E3-1220 3.1GHz QuadCore
    Intel C202 Chipset
    4GB RAM DDR3 1333MHz
    2x Broadcom NetXtreme II BCM5716 on Board
    PERC H200 SATA Controller (no Raid/AHCI Mode on)

    Full dmesg

    Copyright (c) 1992-2010 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    	The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 8.1-RELEASE-p4 #0: Fri Jun 10 01:13:23 EDT 2011
        root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3100.04-MHz K8-class CPU)
      Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
      Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x17bae3ff<sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,<b17>,SSE4.1,SSE4.2,x2APIC,POPCNT,<b24>,AESNI,XSAVE,<b28>>
      AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
    real memory  = 4294967296 (4096 MB)
    avail memory = 4084846592 (3895 MB)
    ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
    FreeBSD/SMP: 1 package(s) x 4 core(s)
     cpu0 (BSP): APIC ID:  0
     cpu1 (AP): APIC ID:  2
     cpu2 (AP): APIC ID:  4
     cpu3 (AP): APIC ID:  6
    ioapic0 <version 2.0="">irqs 0-23 on motherboard
    wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
    wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80658c00, 0) error 1
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804748a0, 0) error 1
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80474940, 0) error 1
    wlan: mac acl policy registered
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804749e0, 0) error 1
    kbd1 at kbdmux0
    cryptosoft0: <software crypto="">on motherboard
    padlock0: No ACE support.
    acpi0: <dell pe_sc3="">on motherboard
    acpi0: [ITHREAD]
    acpi0: Power Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    cpu0: <acpi cpu="">on acpi0
    cpu1: <acpi cpu="">on acpi0
    cpu2: <acpi cpu="">on acpi0
    cpu3: <acpi cpu="">on acpi0
    acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 900
    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
    pci0: <acpi pci="" bus="">on pcib0
    ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xc5106000-0xc51063ff irq 16 at device 26.0 on pci0
    ehci0: [ITHREAD]
    usbus0: EHCI version 1.0
    usbus0: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
    pcib1: <acpi pci-pci="" bridge="">at device 28.0 on pci0
    pci1: <acpi pci="" bus="">on pcib1
    bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci1
    miibus0: <mii bus="">on bce0
    brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
    brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    bce0: [ITHREAD]
    bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
    bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xc2000000-0xc3ffffff irq 17 at device 0.1 on pci1
    miibus1: <mii bus="">on bce1
    brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
    brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    bce1: [ITHREAD]
    bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
    ehci1: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xc5105000-0xc51053ff irq 23 at device 29.0 on pci0
    ehci1: [ITHREAD]
    usbus1: EHCI version 1.0
    usbus1: <ehci (generic)="" usb="" 2.0="" controller="">on ehci1
    pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
    pci2: <acpi pci="" bus="">on pcib2
    vgapci0: <vga-compatible display="">mem 0xc4000000-0xc47fffff,0xc5000000-0xc5003fff,0xc4800000-0xc4ffffff irq 19 at device 3.0 on pci2
    isab0: <pci-isa bridge="">at device 31.0 on pci0
    isa0: <isa bus="">on isab0
    atapci0: <intel ahci="" controller="">port 0x2048-0x204f,0x2054-0x2057,0x2040-0x2047,0x2050-0x2053,0x2020-0x203f mem 0xc5104000-0xc51047ff irq 19 at device 31.2 on pci0
    atapci0: [ITHREAD]
    atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM not supported
    ata2: <ata 0="" channel="">on atapci0
    ata2: [ITHREAD]
    ata3: <ata 4="" channel="">on atapci0
    ata3: [ITHREAD]
    ata4: <ata 5="" channel="">on atapci0
    ata4: [ITHREAD]
    pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
    acpi_tz0: <thermal zone="">on acpi0
    atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
    atrtc0: Warning: Couldn't map I/O.
    uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    uart0: [FILTER]
    uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
    uart1: [FILTER]
    orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
    atkbd: unable to set the command byte.
    sc0: <system console="">at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
    atkbd0: <at keyboard="">irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    atkbd0: [ITHREAD]
    psm0: unable to set the command byte.
    ppc0: cannot reserve I/O port range
    est0: <enhanced speedstep="" frequency="" control="">on cpu0
    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
    est1: <enhanced speedstep="" frequency="" control="">on cpu1
    p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
    est2: <enhanced speedstep="" frequency="" control="">on cpu2
    p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
    est3: <enhanced speedstep="" frequency="" control="">on cpu3
    p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
    Timecounters tick every 1.000 msec
    IPsec: Initialized Security Association Processing.
    usbus0: 480Mbps High Speed USB v2.0
    usbus1: 480Mbps High Speed USB v2.0
    ad4: 238418MB <samsung he253gj="" 1aj30001="">at ata2-master UDMA100 SATA 3Gb/s
    ugen0.1: <intel>at usbus0
    uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
    ugen1.1: <intel>at usbus1
    uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
    acd0: DVDR <plds dvd+="" -rw="" ds-8a5sh="" xd51="">at ata3-master UDMA100 SATA 1.5Gb/s
    SMP: AP CPU #3 Launched!
    SMP: AP CPU #1 Launched!
    SMP: AP CPU #2 Launched!
    Root mount waiting for: usbus1 usbus0
    uhub0: 2 ports with 2 removable, self powered
    uhub1: 2 ports with 2 removable, self powered
    ugen0.2: <vendor 0x8087="">at usbus0
    uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0024,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
    ugen1.2: <vendor 0x8087="">at usbus1
    uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0024,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
    Root mount waiting for: usbus1 usbus0
    uhub2: 6 ports with 6 removable, self powered
    uhub3: 6 ports with 6 removable, self powered
    ugen1.3: <chesen>at usbus1
    ukbd0: <chesen 0="" 3="" ps2="" to="" usb="" converter,="" class="" 0,="" rev="" 1.10="" 0.10,="" addr="">on usbus1
    kbd2 at ukbd0
    ums0: <chesen 0="" 3="" ps2="" to="" usb="" converter,="" class="" 0,="" rev="" 1.10="" 0.10,="" addr="">on usbus1
    ums0: 5 buttons and [XYZ] coordinates ID=1
    Root mount waiting for: usbus1
    ugen1.4: <vendor 0x0424="">at usbus1
    uhub4: <vendor 4="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
    uhub4: 4 ports with 4 removable, self powered
    Trying to mount root from ufs:/dev/ad4s1a
    pflog0: promiscuous mode enabled
    bce1: link state changed to UP
    bce1: link state changed to DOWN
    bce1: link state changed to UP</vendor></vendor></chesen></chesen></chesen></vendor></vendor></vendor></vendor></plds></intel></intel></intel></intel></samsung></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></thermal></serial></ata></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></ehci></ehci></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></ehci></ehci></acpi></acpi></high></acpi></acpi></acpi></acpi></dell></software></version></dell ></lahf></syscall,nx,rdtscp,lm></b28></b24></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,<b17></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> 
    

    openssl speed test

    
    OpenSSL 0.9.8n 24 Mar 2010
    built on: date not available
    options:bn(64,64) md2(int) rc4(ptr,int) des(idx,cisc,16,int) aes(partial) blowfish(idx) 
    compiler: cc
    available timing options: USE_TOD HZ=128 [sysconf value]
    timing function used: getrusage
    The 'numbers' are in 1000s of bytes per second processed.
    type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
    md2               1933.46k     4004.58k     5468.33k     6019.87k     6211.23k
    mdc2             10637.53k    11635.86k    11924.31k    11993.31k    12020.84k
    md4              35253.37k   121363.02k   327982.21k   573275.44k   733455.11k
    md5              28810.91k    93487.38k   232231.77k   369037.26k   445549.94k
    hmac(md5)        24399.38k    81022.47k   211564.25k   355244.03k   442235.01k
    sha1             24382.03k    70949.01k   152356.84k   214492.95k   243549.84k
    rmd160           21122.52k    57936.65k   117286.50k   157102.87k   174414.24k
    rc4             432919.54k   467948.46k   479049.36k   484190.88k   485120.74k
    des cbc          52826.88k    54170.26k    54463.23k    54569.13k    54623.27k
    des ede3         20360.37k    20571.76k    20644.87k    20665.63k    20675.05k
    idea cbc             0.00         0.00         0.00         0.00         0.00 
    seed cbc             0.00         0.00         0.00         0.00         0.00 
    rc2 cbc          37070.27k    37418.35k    37661.65k    37650.43k    37686.64k
    rc5-32/12 cbc   202994.81k   218671.32k   222360.17k   223443.58k   224120.18k
    blowfish cbc     97304.85k   102000.25k   103326.58k   103513.31k   103803.70k
    cast cbc         74851.49k    77387.52k    77617.00k    77927.38k    78256.17k
    aes-128 cbc     150827.35k   159070.95k   160136.14k   159571.87k   161309.63k
    aes-192 cbc     133164.78k   139136.96k   139887.25k   139319.05k   140909.37k
    aes-256 cbc     119119.68k   123816.94k   124365.68k   124100.67k   125392.81k
    camellia-128 cbc    98332.69k   101541.61k   102393.80k   102279.65k   102588.14k
    camellia-192 cbc    74562.54k    76769.03k    77114.10k    77135.60k    77250.90k
    camellia-256 cbc    73902.97k    76660.16k    77235.75k    77244.91k    77225.62k
    sha256           20239.00k    50398.26k    93184.36k   118293.40k   128158.55k
    sha512           15277.55k    61092.07k   109880.78k   165310.84k   193795.24k
    aes-128 ige     161914.65k   170017.81k   171511.63k   171431.76k   172629.18k
    aes-192 ige     141447.88k   147820.36k   149096.72k   148919.49k   149586.11k
    aes-256 ige     125646.24k   130526.07k   131408.95k   131296.88k   132011.26k
                      sign    verify    sign/s verify/s
    rsa  512 bits 0.000182s 0.000019s   5489.2  53938.4
    rsa 1024 bits 0.000567s 0.000034s   1763.6  29706.0
    rsa 2048 bits 0.002872s 0.000088s    348.2  11377.7
    rsa 4096 bits 0.017315s 0.000270s     57.8   3708.1
                      sign    verify    sign/s verify/s
    dsa  512 bits 0.000110s 0.000110s   9078.4   9093.0
    dsa 1024 bits 0.000250s 0.000281s   3992.4   3565.0
    dsa 2048 bits 0.000722s 0.000855s   1385.5   1169.5
    
    

    Finally a big thanks to the whole pfSense Team! :)
      Christof



  • That brick wall for AES is kind of interesting.  Most systems I've tested get a lot better numbers as the block size increases, at least up to 256 bytes or so.



  • Hello,

    Could this setup pull through 1 Gbps connection?

    :-)


Locked