Is there a problem of slow access interfaces with Broadcom (bce)?
-
Access to the pfsense 2.0rc2 server using a network interface Broadcom (bce) is very, very slow and occurs whenever a 503 error in the browser.
Is there any problem with the driver bce - Broadcom NetXtreme II (BCM5706/5708/5709/5716) in pfsense 2.0RC2?Best regards,
Gondim
-
No problems on my boxes with that driver but if you are on the 64bit build do a netstat -m and check the following line
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
If they are NOT zero then increase the value of kern.ipc.nmbclusters. I tend to have it set to 4 times the default value but I'm running full internet routing tables.
-
No problems on my boxes with that driver but if you are on the 64bit build do a netstat -m and check the following line
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
If they are NOT zero then increase the value of kern.ipc.nmbclusters. I tend to have it set to 4 times the default value but I'm running full internet routing tables.
Hi,
I looked at these parameters and were cleared. It may be something related to the link aggregation?
Best regards,