SCRUB settings



  • Hi,
    I am having issues sending attachments. After looking at the logs, I am seeing the following:

    @1 scrub in on rl0 all min-ttl 255 fragment reassemble

    1>I did modify the filter.inc for scrubbing from all to min-ttl 255. No good

    2>I also tried creating a rule to allow all https traffic as a test, this did not work. : No good
    3>I set static port in OUTBOUND NAT : No good
    4>Set the "Clear DF bit" in System>Advanced : No good.

    After creating the test rule I just did not get log hits that anything was being blocked. Any ways, could some one please give me a hand with this?


Locked